佛山考驾照科目一有英文版

1. This sign indicates construction section ahead and bypassing from left or right side.

A. Right

B. Wrong

Answer: B

2. It lights continuously to indicate that airbag is working.

A. Right

B. Wrong

Answer: B

3. Whats the meaning of this sign?

A. a manned level crossing 50m ahead

B. an unmanned level crossing 100m ahead

C. a manned level crossing 100m ahead

D. an unmanned level crossing 50m ahead

Answer: B

4. When a motorized vehicle breaks down at night, and is difficult to move, the driver should turn on the hazard lights, the contour lights and the tail lights.

A. Right

B. Wrong

Answer: A

5. When driving a vehicle through an inundated road with pedestrians on both sides, the driver should ________.

A. Speed up and pass

B. Go forward normally

C. Continuously honk

D. Reduce speed and go slowly

Answer: D

6. Using the low beam light in such circumstances.

A. Right

B. Wrong

Answer: A

7. The full mark of Driving Skills, Common Knowledge on Safe and Courteous Driving of the subject 3 test is 100, each of the passing mark is 80 and 90.

A. Right

B. Wrong

Answer: B

8. Which lane to choose when turning left in this intersection?

A. the far left lane

B. middle lane

C. not need to change lane

D. the far right lane

Answer: A

9. This motorized vehicle parked on the roadside has no illegal act.

A. Right

B. Wrong

Answer: B

10. A motorized vehicle driver who drives after drinking is subject to a 12-point penalty.

A. Right

B. Wrong

Answer: A

11. What pedal is it?

A. accelerator pedal

B. clutch pedal

C. handbrake

D. the brake pedal

Answer: A

12. Whats the meaning of this guide arrow?

A. left curve or need to merge with the left flow ahead

B. right curve or need to merge with the right flow ahead

C. merge with the left flow due to right side obstacle ahead

D. left curve or need to bypass from left side ahead

Answer: A

13. Before a motorized vehicle overtakes, the driver should turn on the left-turn signal, use the high and low beam lights alternately or honk in advance.

A. Right

B. Wrong

Answer: A

14. The double yellow solid lines in the middle of the road are used to separate the traffic flow in opposite directions, crossing the lines to overtake or make a turn is allowed if it is safe.

A. Right

B. Wrong

Answer: B

15. What is this manipulation device?

A. switch of the turn signal

B. switch of the head lights

C. switch of wiper

D. switch of defogger

Answer: D

16. When discovering a road congestion ahead, the correct way to deal with this situation is to _______.

A. Continue to weave through

B. Find space and overtake one vehicle after another

C. Honk to indicate the vehicle in front to speed up

D. Stop and wait in line

Answer: D

17. What is the max speed on this highway?

A. 70km/hr

B. 50km/hr

C. 40km/hr

D. 30km/hr

Answer: C

18. Turn on the right-turn signal and return immediately to the original lane afterovertaking.

A. Right

B. Wrong

Answer: B

19. A motorized vehicle is not allowed to stop in the section 50 meters to the narrow road less than 4 meters width.

A. Right

B. Wrong

Answer: A

20. Whats the meaning of this sign?

A. expressway emergency strip

B. expressway yielding area

C. expressway bus station

D. expressway parking area

Answer: A

21. Whats the meaning of the marking in the red circle?

A. temporary stopping

B. bay-stopping

C. emergency stopping

D. public bus station

Answer: B

22. When driving at night on a road that has good lighting, the driver should use _______.

A. The fog light

B. The low beam light

C. The high beam light

D. The hazard lights

Answer: B

23. Whats the meaning of this sign?

A. 3.5m width limit

B. 3.5m width limit ban is lifted

C. 3.5m distance from vehicles limit

D. 3.5m height limit

Answer: D

24. Traffic Police can detain the driver according to law, if the driver drives a motorized vehicle which is suspected of reaching the write-off standard.

A. Right

B. Wrong

Answer: B

25. Continuously using the foot brake on a long downhill road ________.

A. Can shorten the engines service life

B. Increases the drivers labor intensity

C. Can drastically reduce the braking efficiency due to the rising temperature of the brake

D. Can easily cause vehicle overturn

Answer: C