丹东摩托车类考试英文题库

1. What is the meaning of this sign?

A. straight-going lane

B. going straight only

C. one-way road

D. no going straight

Answer: B

2. What is the meaning of this sign?

A. no U turn at intersection

B. no changing lane from both sides

C. no left or right turn

D. no going straight

Answer: C

3. What is the meaning of this sign?

A. embankment road

B. steep uphill road

C. continuous up slopes

D. steep downhill road

Answer: D

4. When a rear tire of a motorcycle blows out, the driver should ________.

A. Swiftly turn the steering handlebar to adjust

B. Firmly hold the steering handlebar with both hands

C. Swiftly turn the steering handlebar to the opposite direction

D. Swiftly take braking measures

Answer: B

5. Which lamp should be used when motor vehicles pass hrough an intersection at night where there is no traffic light signal?

A. High-beam

B. Low-beam

C. Hazard lamps

D. High-beam and low-beam should be used alternatively

Answer: D

6. Turning on the high-beam is an effective way to improve visibility in fog weather.

A. Right

B. Wrong

Answer: B

7. The width of loaded goods should ______________ from a three-wheel motorcycle.

A. not exceed 0.15 meter

B. not exceed

C. not exceed 0.20 meter

D. not exceed 0.25 meter

Answer: B

8. A motorized vehicle driver who uses falsified or altered driving license is subject to a 12-point penalty.

A. Right

B. Wrong

Answer: A

9. What is the meaning of this sign?

A. continuous down slopes

B. steep downhill road

C. steep uphill road

D. continuous up slopes

Answer: A

10. What needs attention when a motor vehicle drives on a road covered with ice and snow?

A. Braking length is extended

B. Anti-skating resistance will be greater

C. The adhesive force of the road will be greater

D. The braking length will be shorter

Answer: A

11. How should lamps be used by the motor vehicle driver who follows a vehicle on a road section at night where he street light condition is good?

A. Turn off the headlamp

B. Use high-beam

C. Turn off all lamps

D. Use low-beam

Answer: D

12. A driver should drive the vehicles in accordance with the qualification listed on the driving license.

A. Right

B. Wrong

Answer: A

13. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

14. The driving license of a motorized vehicle driver will be detained after his penalty scores reach 12 points in a scoring circle.

A. Right

B. Wrong

Answer: A

15. How to use lights when changing to the left lane on road?

A. turn on the right-turn signal in advance

B. not need to turn on any turn signal

C. turn on the left-turn signal in advance

D. turn on the low beam lights in advance

Answer: C

16. Turn on the left-turn signal in advance when making a U turn on the road.

A. Right

B. Wrong

Answer: A

17. What is the meaning of this sign?

A. Road narrows on both sides

B. Road narrows on the right side

C. Road narrows on the left side

D. Bridge narrows

Answer: C

18. When the driver is suspected of drinking or drunk in a traffic accident, preserve the scene and immediately report to the police.

A. Right

B. Wrong

Answer: A

19. What is the meaning of this sign?

A. driving at reduced speed in the section of 40 meters

B. minimum speed is 40km/hr

C. maximum speed is 40km/hr

D. 40km/hr speed limit ban is lifted

Answer: D

20. What is the meaning of this sign?

A. no right turn

B. no U turn

C. no going straight

D. no left turn

Answer: C

21. When the road maintenance vehicle and the engineering vehicle are on duty, the passing vehicles should avoid with care.

A. Right

B. Wrong

Answer: A

22. What is the meaning of this sign?

A. no entry for bicycles

B. lane for non-motorized vehicles

C. special lane for bicycles

D. bicycle stopping area

Answer: B

23. How to choose parking spot when needing to stop by the roadside?

A. stop in the opposite direction by the left roadside

B. stop in the parking area

C. stop anywhere as will by the roadside

D. stop in the sidewalk

Answer: B

24. What is the max speed at sharp curve?

A. 20km/hr

B. 30km/hr

C. 40km/hr

D. 50km/hr

Answer: B

25. When a motorcycle reaches a muddy or burst-and-muddy section, the driver should stop, observe and select the level and solid section or the section with vehicle tracks.

A. Right

B. Wrong

Answer: A