无锡最新摩托车科目四试题库英文题

1. As shown in this picture, the intersection guide line is designed to help drivers make turns.

A. Right

B. Wrong

Answer: A

2. Drivers are allowed to cross the broken and solid white line on the road when changing lanes or pulling over.

A. Right

B. Wrong

Answer: A

3. This road marker indicates that the minimum speed for this road section is 60 km/hour.

A. Right

B. Wrong

Answer: B

4. When a motor vehicle breaks down and has to be stopped on the highway, what should the driver do?

A. Set up a breakdown warning sign 150 meters behind the vehicle

B. Set up a breakdown warning sign 100 meters behind the vehicle

C. If it happens at night, turn on the clearance lamp and rear position lamp

D. Turn on the hazard lamps

Answer: ACD

5. The motor vehicle equipped with ABS may sideslip during an emergency brake.

A. Right

B. Wrong

Answer: A

6. Drivers may turn left when traffic police give these hand signals.

A. Right

B. Wrong

Answer: A

7. The sign on the right warns of right-hand S-shaped bend ahead.

A. Right

B. Wrong

Answer: B

8. The sign in front is an advance announcement of the directions led by this intersection.

A. Right

B. Wrong

Answer: A

9. What should the driver do to ensure the motor vehicle passes the level crossing safely?

A. Change to neutral gear and slide over

B. Switch to low gear after entering the level crossing

C. Decelerate and lower the gear before entering the level crossing

D. Stop and observe inside the level crossing

Answer: C

10. What should the driver do when the motor vehicle counters this situation?

A. Sound the horn continuously to warn

B. Speed up and bypass from the front

C. Slow down when encountering any risks

D. Slow down voluntarily and yield

Answer: D

11. Drivers needn’t yield to pedestrians who display such behavior.

A. Right

B. Wrong

Answer: B

12. In which of the following ways can motor vehicles avoid a tire burst?

A. Lowering tire pressure

B. Checking tires regularly

C. Removing foreign matters from the tire tread grooves timely

D. Replacing the tires that have cracks or deep cuts

Answer: BCD

13. The marking on the road surface indicates that the speed limit of this road section is 50 km/hour.

A. Right

B. Wrong

Answer: A

14. The guide arrow on the road surface of this lane indicates that there is an intersection on the right side of the road.

A. Right

B. Wrong

Answer: B

15. What is the intersection ahead indicated by the right sign?

A. T-shaped intersection

B. Y-shaped intersection

C. Cross-shaped intersection

D. Roundabout

Answer: D

16. How will the adhesive force of road change when speed increases on a damp and slippery road?

A. Increase sharply

B. Increase gradually

C. decrease sharply

D. No change

Answer: C

17. Once inflammable gas causes a fire disaster, it should be put out with water in good time.

A. Right

B. Wrong

Answer: B

18. At this intersection, motor vehicle drivers may directly make a U-turn along the U-turn turning lane.

A. Right

B. Wrong

Answer: B

19. When this signal is constantly flashing, how should a driver react?

A. Speed up as soon as possible

B. Pull over and wait

C. Observe the traffic situation around to make sure of safe driving

D. Refrain from passing

Answer: C

20. After setting off from a roadside, motor vehicle drivers should watch both sides of the road, turn left and drive into the normal lane slowly.

A. Right

B. Wrong

Answer: A

21. How should a motor vehicle follow the other vehicle In front when driving on a road covered with ice and snow?

A. Keep a long safe distance

B. Turn on hazard lamp

C. Change between high-and-low beam alternatively

D. Sound the horn in due time to give a notice to the vehicle in front

Answer: A

22. Motor vehicles are prohibited from turning left in this situation.

A. Right

B. Wrong

Answer: A

23. Which one of the following measures is correct when a motor vehicle intends to overtake but the vehicle in front refuses to yield?

A. Use a long-sounding horn

B. Follow the vehicle in front while turning high-beam

C. Wait for it to yield while keeping a safe distance

D. Use high-beam and low-beam alternatively

Answer: C

24. Which one of the following is the safest way when driving a motor vehicle on this kind of road surface?

A. Slide over by using neutral gear

B. Pass with a high speed

C. Pass by speeding up

D. Pass with a low speed

Answer: D

25. The main reason for this accident is that the pedestrian crossed the street in front of the motor vehicle.

A. Right

B. Wrong

Answer: B