云南驾照考试英语

1. What is this manipulation device?

A. switch of windscreen wiper

B. switch of the head lights

C. switch of the turn signal

D. switch of defogger

Answer: A

2. Driving a motorized vehicle on the highway which has no central line, the maximum speed can not exceed 70 kilometers per hour.

A. Right

B. Wrong

Answer: B

3. When a driver needs to borrow a lane to bypass an obstacle in front and a vehicle in the opposite direction is approaching the obstacle, the driver should ___________.

A. Reduce speed or stop and yield to the vehicle coming in the opposite direction

B. Speed up and bypass the obstacle in advance

C. Honk to indicate the vehicle in the opposite direction to yield

D. Rapidly occupy the lane and force the vehicle coming in the opposite direction to stop and yield

Answer: A

4. Whats the meaning of this sign?

A. right-turn lane

B. U turn lane

C. left-turn lane

D. lanes for going in different directions

Answer: A

5. What device does the switch of this symbol control?

A. the windscreen defrosting

B. the rear window wiper

C. the rear window defrosting

D. the windscreen wiper

Answer: D

6. What is the Minimum speed on this expressway?

A. 100km/hr

B. 80km/hr

C. 60km/hr

D. 50km/hr

Answer: C

7. Reducing the speed to yield when encountering this situation in the intersection.

A. Right

B. Wrong

Answer: A

8. May speed up to go through the crosswalk in this situation.

A. Right

B. Wrong

Answer: B

9. The three principles for careful driving are concentration, careful observation and early prevention.

A. Right

B. Wrong

Answer: A

10. If a vehicle enters a left lane for overtaking but is unable to ensure a safe horizontal distance with the normally-running vehicle in front, the driver should ________.

A. Speed up and overtake

B. Overtake after running a distance in parallel

C. Give up overtaking

D. Overtake with care

Answer: C

11. This set of the hand signals of the traffic police indicates that the vehicles should ___ .

A. go straight

B. make a turn

C. stop

D. pull over

Answer: A

12. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer: B

13. What mark is the inclined yellow and black lines?

A. entity mark

B. protrusions mark

C. three-dimensional mark

D. deceleration mark

Answer: C

14. Whats the meaning of this sign?

A. Y-shaped intersection

B. T-shaped intersection

C. intersection

D. ring intersection

Answer: B

15. Whats the meaning of this sign?

A. right-turn lane

B. U turn lane

C. left-turn lane

D. lanes for going in different directions

Answer: C

16. The continuously flashing yellow light is to warn that the driver should look and make sure it is safe to pass.

A. Right

B. Wrong

Answer: A

17. The subject 3 test is divided into two parts including Driving Skills, Common Knowledge on Safe and Courteous Driving.

A. Right

B. Wrong

Answer: A

18. Turn on the left-turn signal in advance when making a U turn on the road.

A. Right

B. Wrong

Answer: A

19. If a motorized vehicle driver has caused a major accident in violation of the traffic regulations which has caused serious injury, the driver is subject to a prison term of less than 3 years or a criminal detention.

A. Right

B. Wrong

Answer: A

20. In which situation cannot overtake a vehicle in front?

A. vehicle in front is reducing speed to yield

B. vehicle in front is turning left

C. vehicle in front is pulling over by the roadside

D. vehicle in front is turning right

Answer: B

21. Whats the meaning of this sign?

A. Passing on both sides

B. Passing by the right side

C. Passing by the left side

D. Passing is prohibited

Answer: C

22. Whats the meaning of this sign?

A. Road traffic flow monitoring

B. Deceleration photographed area

C. Full section snapshot

D. Traffic monitoring equipment

Answer: D

23. When a motorized vehicle crosses a non-motorized vehicle on a narrow road or a narrow bridge at night, the motorized vehicle should use the high beam light.

A. Right

B. Wrong

Answer: B

24. When a vehicle reaches a sharp curve, the driver should _______.

A. Brake suddenly and go slowly

B. Drive along the outer side of the curve

C. Fully reduce speed and drive on the right side

D. Go forward by borrowing the opposite lane

Answer: C

25. What device does the switch of this symbol control?

A. the windscreen wiper and washer

B. the rear window defrosting or defogging

C. the rear window wiper and washer

D. the windscreen defrosting or defogging

Answer: C