德州驾校考试 英文

1. This sign reminds the road in front changes to inseparate two ways section.

A. Right

B. Wrong

Answer: A

2. Whats the meaning of this sign?

A. landslide section

B. construction section

C. factory ahead

D. jammed road

Answer: B

3. Which is correct if a vehicle breaks down and is difficult to move?

A. turn on the hazard lights

B. turn on all the lights of the vehicle

C. forbid the passengers to get off

D. place a warning sign in front of the vehicle

Answer: A

4. Whats the meaning of this sign?

A. danger-avoiding lane

B. emergency lane

C. road shoulder

D. sharp curve

Answer: A

5. Whats the meaning of this sign?

A. distance to a tourist area

B. category of a tourist area

C. direction of a tourist area

D. symbol of a tourist area

Answer: C

6. It lights when turning on the width light.

A. Right

B. Wrong

Answer: A

7. Driving a small passenger vehicle on the expressway, the minimum speed should not be less than 90 kilometers per hour.

A. Right

B. Wrong

Answer: B

8. Whats the meaning of this sign?

A. no left turn

B. dead-end road

C. no passing

D. bypass if overheight

Answer: D

9. If one drives an illegally assembled motorized vehicle, he should not only pay the fine, but also ________ .

A. be temporarily detained the driving license

B. be revoked the driving license

C. be held for criminal liabilities

D. be detained for less than 10 days

Answer: B

10. Whats the meaning of this sign?

A. intersection ahead

B. interchange ahead

C. Y-shaped intersection ahead

D. ring intersection ahead

Answer: B

11. Which kind of sign is it?

A. warning sign

B. prohibitive sign

C. indicative sign

D. directional sign

Answer: B

12. The passenger in the front seat does not need to buckle up when a motorized vehicle runs.

A. Right

B. Wrong

Answer: B

13. Whats the meaning of this sign?

A. sharp right curve

B. bypass from right side

C. continuous curves

D. sharp left curve

Answer: A

14. When a motorized vehicle crosses a non-motorized vehicle on a narrow road or a narrow bridge at night, the motorized vehicle should use the high beam light.

A. Right

B. Wrong

Answer: B

15. How to do while entering this intersection?

A. shift the high and low beam lights alternately to remind the cars already in the intersection to yield

B. quickly cut in the cars already in the intersection

C. let the cars already in the intersection go first

D. honk and enter directly

Answer: C

16. Whats the meaning of this sign?

A. No passing

B. driving at reduced speed

C. time limit for entering

D. no entering

Answer: A

17. May not turn on the turn signal when overtaking.

A. Right

B. Wrong

Answer: B

18. Driving on the expressway with full signs and marking, the driver should run in the lane and at the speed according to _________.

A. Signs and markings

B. Rules on road traffic safety

C. Vehicle manual

D. Local regulations

Answer: A

19. Opening the doors of a motorized vehicle should not obstruct the flow of other vehicles and pedestrians.

A. Right

B. Wrong

Answer: A

20. When passing a section of a mountain road which is prone to landside and mudflow, the driver should not stop.

A. Right

B. Wrong

Answer: A

21. When starting up a vehicle stopping at the roadside, the driver should first ________.

A. Depress the accelerator pedal and start

B. Honk

C. Increase engine rotation speed

D. Observe the conditions around the vehicles

Answer: D

22. Stop the vehicle and observe when reaching the level crossing in this situation.

A. Right

B. Wrong

Answer: A

23. Whats the meaning of this sign?

A. reducing speed 40m ahead

B. minimum speed is 40km/hr

C. axle weight limit is 40 tons

D. maximum speed limit is 40km/hr

Answer: D

24. This set of the hand signals of the traffic police indicates that the vehicles should ___ .

A. wait to turn left

B. pull over

C. turn right

D. reduce speed and pass slowly

Answer: C

25. When a vehicle goes uphill, the driver should observe the road conditions and the length of the slope in advance and shift to the lower gear in a timely manner to ensure the vehicle has sufficient power.

A. Right

B. Wrong

Answer: A