临沧科目一英文考试

1. What kind of marking is the yellow broken line in the center of the road?

A. indicative marking

B. prohibitive marking

C. warning sign

D. auxiliary marking

Answer: A

2. Whats the meaning of the white rectangle marking?

A. special space for taxicabs to take and drop passengers

B. horizontal parking space

C. inclined parking space

D. vertical parking space

Answer: B

3. A motorized vehicle driver who uses falsified or altered driving license is subject to a 12-point penalty.

A. Right

B. Wrong

Answer: A

4. Using the low beam light in such circumstances.

A. Right

B. Wrong

Answer: A

5. A motorized vehicle is not allowed to stop in the section 50 meters to the narrow road less than 4 meters width.

A. Right

B. Wrong

Answer: A

6. What is the role of ABS system when applying emergency braking?

A. cut off the power output

B. control the direction automatically

C. reduce braking inertia

D. prevent wheel blocking

Answer: D

7. Driving a motorized vehicle on the road should be required to be with a license plate.

A. Right

B. Wrong

Answer: A

8. Continuously using the foot brake on a long downhill road ________.

A. Can shorten the engines service life

B. Increases the drivers labor intensity

C. Can drastically reduce the braking efficiency due to the rising temperature of the brake

D. Can easily cause vehicle overturn

Answer: C

9. What is this instrument?

A. pressure meter

B. ammeter

C. water temperature meter

D. fuel meter

Answer: D

10. Whats the meaning of this sign?

A. bypass from left side

B. continuous curves

C. sharp left curve

D. sharp right curve

Answer: C

11. Whats the meaning of this sign?

A. turn left

B. no going straight

C. straight-going lane

D. one-way road

Answer: A

12. The seat belts can reduce the injury of the driver and passengers when there is a collision.

A. Right

B. Wrong

Answer: A

13. When driving slowly in a congested road, the driver should ________ if another vehicle forcefully cuts in.

A. Honk to warn it against cutting in

B. Speed up to closely follow the vehicle in front and refuse to allow it to cut in

C. Squeeze the cutting-in vehicle to force it to leave

D. Voluntarily yield to ensure safe driving

Answer: D

14. Whats the meaning of this sign?

A. Road traffic flow monitoring

B. Deceleration photographed area

C. Full section snapshot

D. Traffic monitoring equipment

Answer: D

15. In such road sections, you can enter the cross-hatched marking area to wait.

A. Right

B. Wrong

Answer: B

16. The main impact of mountain roads on safe driving is _______.

A. The traffic conditions are boring

B. The slopes are long, the curves are sharp and visibility range is shorter.

C. The traffic flow is heavy

D. The road signs are fewer

Answer: B

17. In which situation cannot overtake a vehicle in front?

A. vehicle in front is reducing speed to yield

B. vehicle in front is turning left

C. vehicle in front is pulling over by the roadside

D. vehicle in front is turning right

Answer: B

18. When a vehicle passes a curve on a mountain road, the driver should reduce speed, honk and stick to the right.

A. Right

B. Wrong

Answer: A

19. Which should be carried onboard?

A. insurance policy

B. vehicle license

C. certificate of ex-factory inspection

D. vehicle registration papers

Answer: B

20. The cycle for recording the accumulated penalty points for violating road traffic safety regulations is ____________.

A. 12 months

B. 24 months

C. 3 months

D. 6 months

Answer: A

21. How to do when encountering this situation of waiting in line?

A. cross the solid line from left side to overtake

B. overtake from both sides as will

C. wait in line

D. borrow the lane from right side to overtake

Answer: C

22. A motorized vehicle driver who drives the vehicle which permission is different is subject to a ________.

A. 2-point penalty

B. 3-point penalty

C. 6-point penalty

D. 12-point penalty

Answer: D

23. If a driver has driven a motorized vehicle for more than four hours running, he should stop the vehicle and rest for at least ____________.

A. 10 minutes

B. 15 minutes

C. 20 minutes

D. 5 minutes

Answer: C

24. When a vehicle passes a level crossing, the driver should use the low gear to pass and should not change gear halfway in order to avoid engine kill.

A. Right

B. Wrong

Answer: A

25. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer: B