巴音郭楞英文驾照科目一考试

1. Whats the meaning of this park marking?

A. special stopping and waiting area

B. special getting-on and getting-off area

C. time limit parking

D. fixed direction parking

Answer: D

2. Driving motor vehicle with ABS system may occur side skidding when applying emergency braking.

A. Right

B. Wrong

Answer: A

3. When a vehicle passes a bumped road, the driver should ________.

A. Speed up and dash over under inertia

B. Change to the neutral gear and slide over

C. Maintain the original speed and pass

D. Pass slowly and steadily

Answer: D

4. When overtaking, the driver should try his best to increase the horizontal distance and,when necessary, may cross the solid line to overtake.

A. Right

B. Wrong

Answer: B

5. What is this manipulation device?

A. switch of windscreen wiper

B. switch of the head lights

C. switch of the turn signal

D. switch of defogger

Answer: A

6. When a vehicle changes lane, the driver should turn on the turn signal in advance,observe traffic conditions, maintain a safe distance and move into the new lane.

A. Right

B. Wrong

Answer: A

7. What marking is the white solid lines in the circle?

A. guide lanes lines

B. variable guide lanes lines

C. direction guide lines

D. one-way driving lines

Answer: A

8. If one drives an illegally assembled motorized vehicle, he should not only pay the fine, but also ________ .

A. be temporarily detained the driving license

B. be revoked the driving license

C. be held for criminal liabilities

D. be detained for less than 10 days

Answer: B

9. No turning right when encountering this traffic light at the intersection.

A. Right

B. Wrong

Answer: B

10. Before a motorized vehicle overtakes, the driver should turn on the left-turn signal, use the high and low beam lights alternately or honk in advance.

A. Right

B. Wrong

Answer: A

11. When driving in icy and snowy weather, light reflection from the accumulated snow can easily make a driver feel dizzy and have an illusion.

A. Right

B. Wrong

Answer: A

12. A qualified driver should not only be technically adept, but more importantly have good driving habits and ethical attainments.

A. Right

B. Wrong

Answer: A

13. When driving slowly in a congested road, the driver should ________ if another vehicle forcefully cuts in.

A. Honk to warn it against cutting in

B. Speed up to closely follow the vehicle in front and refuse to allow it to cut in

C. Squeeze the cutting-in vehicle to force it to leave

D. Voluntarily yield to ensure safe driving

Answer: D

14. When a vehicle changes lane, the driver should turn on the turn signal and rapidly enter the new lane.

A. Right

B. Wrong

Answer: B

15. What is the max speed at sharp curve?

A. 20km/hr

B. 30km/hr

C. 40km/hr

D. 50km/hr

Answer: B

16. How far should be the distance from the vehicle in front at the speed of more than 100 km/hr when driving a small passenger vehicle on the expressway?

A. more than 50 meters

B. more than 60 meters

C. more than 100 meters

D. more than 80 meters

Answer: C

17. What is the role of ABS system when applying emergency braking?

A. cut off the power output

B. control the direction automatically

C. reduce braking inertia

D. prevent wheel blocking

Answer: D

18. It lights to remind that the driver‘s seat is not adjusted properly.

A. Right

B. Wrong

Answer: B

19. It lights when turning on the right-turn signal.

A. Right

B. Wrong

Answer: B

20. This sign warns the driver there is school area ahead.

A. Right

B. Wrong

Answer: B

21. Traffic Police can detain the vehicle according to law if it runs on the road failing to place a label of inspection.

A. Right

B. Wrong

Answer: A

22. How to run on this road?

A. run in the middle of the road

B. run on both side of the road

C. run according to lanes

D. go forward at will

Answer: A

23. A motorized vehicle is not allowed to stop in the section within

A. 5m

B. 10m

C. 50m

D. 30m

Answer: C

24. This sign reminds embankment road ahead.

A. Right

B. Wrong

Answer: B

25. What mark is the inclined yellow and black lines?

A. entity mark

B. protrusions mark

C. three-dimensional mark

D. deceleration mark

Answer: C