陇南驾考英文版手机版

1. The main impact of mountain roads on safe driving is _______.

A. The traffic conditions are boring

B. The slopes are long, the curves are sharp and visibility range is shorter.

C. The traffic flow is heavy

D. The road signs are fewer

Answer: B

2. Whats the meaning of this guide arrow?

A. indicate going straight or turning right

B. indicate turning right or making a U turn

C. indicate going straight or changing to right lane

D. indicate going straight or making a U turn

Answer: A

3. It lights to indicate that ______

A. the head fog light is turned on

B. the low beam light is turned on

C. the high beam light is turned on

D. the tail fog light is turned on

Answer: C

4. It lights to indicate that ______

A. left-turn signal flashes

B. front and rear width lights light on

C. front and rear width lights light on

D. right-turn signal flashes

Answer: A

5. When following a vehicle on the road, the distance from the vehicle in front is not important. As long as the driver goes forward at the same speed as the vehicle in front does, he can avoid rear-end collision.

A. Right

B. Wrong

Answer: B

6. When driving a vehicle on the road, the driver should drive safely at the prescribed speed.

A. Right

B. Wrong

Answer: A

7. Whats the meaning of this yellow sign on the road?

A. no U turn

B. no left turn

C. no right turn

D. no going straight

Answer: C

8. In the course of reversing, the driver should move slowly, observe the conditions on both sides and in the rear and be ready to stop anytime.

A. Right

B. Wrong

Answer: A

9. When a vehicle encounters a bike rider coming in the opposite direction on the road, the driver should _________.

A. Continuously change the high and low bean lights

B. Continuously honk

C. Use the low beam light, reduce speed or stop to evade

D. Use the high beam light

Answer: C

10. When a vehicle is being overtaken by another vehicle, and there is a vehicle following behind, the driver should _____.

A. continue to speed up and run

B. turn slightly to the right side, keep a safe horizontal distance

C. run by road center

D. speed up to the right side to yield

Answer: B

11. Traffic markings are divided into indication, warning and prohibition.

A. Right

B. Wrong

Answer: A

12. When driving slowly in a congested road, the driver should ________ if another vehicle forcefully cuts in.

A. Honk to warn it against cutting in

B. Speed up to closely follow the vehicle in front and refuse to allow it to cut in

C. Squeeze the cutting-in vehicle to force it to leave

D. Voluntarily yield to ensure safe driving

Answer: D

13. What kind of violation does this stopping car have?

A. stop occupying the lane for non-motorized vehicles

B. stop in the section with no stopping marking

C. stop at bus station

D. stop occupying sidewalk

Answer: C

14. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road entry

D. road exit marking

Answer: A

15. Whats the meaning of this sign?

A. right-turn lane

B. U turn lane

C. left-turn lane

D. lanes for going in different directions

Answer: C

16. It lights to indicate that ______

A. the hazard lights flash

B. right-turn signal flashes

C. left-turn signal flashes

D. front and rear width lights flash

Answer: A

17. Whats the meaning of this sign?

A. landslide section

B. construction section

C. factory ahead

D. jammed road

Answer: B

18. What kind of violation does this vehicle on road have?

A. not hang the license plate as required

B. deliberately cover the license plate

C. occupy the lane for non-motorized vehicles

D. run in the opposite direction

Answer: B

19. Traffic Police can detain the vehicle according to law if it runs on the road failing to place a label of inspection.

A. Right

B. Wrong

Answer: A

20. It lights when turning on the left-turn signal.

A. Right

B. Wrong

Answer: B

21. When a vehicle is being overtaken by another vehicle, the driver should _____.

A. Run by the central line of the road

B. Speed up and yield

C. Continue to speed up and run

D. Reduce speed and run on the right side

Answer: D

22. When a vehicle approaches an intersection without crosswalk, the driver should _______ if he finds people are crossing the street.

A. Reduce speed or stop to yield

B. Honk to indicate them to yield

C. Immediately change lane and bypass the pedestrians

D. Pass before the pedestrians

Answer: A

23. Whats the meaning of the yellow marking on the road?

A. gradual road width

B. more carriageways

C. closing to obstacle

D. construction section indication

Answer: A

24. How to make a U turn in this intersection?

A. broken lines of the central line

B. make a U turn from the right lane

C. enter the intersection and make a U turn

D. make a U turn in the crosswalk

Answer: A

25. How far should be the distance from the vehicle in front at the speed of more than 100 km/hr when driving a small passenger vehicle on the expressway?

A. more than 50 meters

B. more than 60 meters

C. more than 100 meters

D. more than 80 meters

Answer: C