福建驾考科目一英文版题库

1. After starting the engine, it lights to indicate that ______

A. engine main oil way blockage

B. engine oil pressure is too low

C. engine crankshaft box leaks

D. engine oil pressure is too high

Answer: B

2. How to use lights in this weather condition?

A. use high beam lights

B. use fog lights

C. not use any light

D. turn on the right-turn signal

Answer: B

3. In which situation that a driver will not allowed to drive?

A. penalty points reach 10 points

B. penalty points reach 6 points

C. driving license lost or destroyed

D. driving license is nearly expired

Answer: C

4. The main impact of mountain roads on safe driving is _______.

A. The traffic conditions are boring

B. The slopes are long, the curves are sharp and visibility range is shorter.

C. The traffic flow is heavy

D. The road signs are fewer

Answer: B

5. It lights to indicate that luggage compartment is open.

A. Right

B. Wrong

Answer: B

6. Does not affect normal driving when it lights

A. Right

B. Wrong

Answer: B

7. Whats the meaning of this sign?

A. running by right side

B. no going straight

C. straight one-way road

D. yield if going to go straight

Answer: C

8. In the course of making a U turn, the driver should strictly control the speed, carefully observe the road conditions before and behind the vehicle, and may advance or reverse only if it is safe to do so.

A. Right

B. Wrong

Answer: A

9. What does the traffic light mean?

A. no right turn

B. intersection warning

C. going straight is allowed

D. speed up and pass

Answer: B

10. Whats the meaning of this sign?

A. emergency shelter

B. service area

C. pedestrian passage

D. crossing road facility

Answer: A

11. What marking are the white serrated solid lines in the circle?

A. guide lane lines

B. direction guide line

C. variable guide lane line

D. one-way driving line

Answer: C

12. If an improper place is chosen for crossing another vehicle, the driver should immediately _______.

A. Reduce speed and cross each other slowly, or stop to yield

B. Occupy the left lane to force the opposite party to reduce speed and yield

C. Turn the head light to indicate the opposite party to stop and yield

D. Speed up and select a better place

Answer: A

13. How to drive through the intersection without traffic lights?

A. reduce speed and go slowly

B. speed up and pass

C. let large vehicle go first

D. let the left vehicle go first

Answer: A

14. Whats the meaning of this sign?

A. dangerous hillside road

B. cliff section

C. watch for dropping stone

D. dangerous section

Answer: C

15. When bicycles ahead obstruct the traffic flow, the driver may honk to remind them,speed up and bypass.

A. Right

B. Wrong

Answer: B

16. Which kind of sign is it?

A. tourist zone sign

B. work area sign

C. notification signs

D. expressway sign

Answer: A

17. Whats the meaning of this sign?

A. watch for two-way road

B. driving by either side of the road

C. watch for variable lane

D. variable lane

Answer: C

18. It lights to indicate that ______

A. handbrake released

B. foot brake failure

C. braking system is abnormal

D. the brake pedal does not return back

Answer: C

19. You can overtake from both sides in this case.

A. Right

B. Wrong

Answer: B

20. Whats the meaning of this sign?

A. 3m width limit ahead

B. 3m width limit

C. the 3m width limit ban is lifted

D. 3m height limit

Answer: B

21. How to cross each other on a narrow mountain road without the central dividing line?

A. The vehicle not close to the mountain goes first

B. The vehicle close to the mountain goes first

C. The empty vehicle goes first

D. The slow-moving vehicle goes first

Answer: A

22. What is the Minimum speed on this expressway?

A. 100km/hr

B. 80km/hr

C. 60km/hr

D. 50km/hr

Answer: C

23. Before a vehicle enters an intersection, the driver should reduce speed, observe and make sure it is safe to do so.

A. Right

B. Wrong

Answer: A

24. Opening the doors of a motorized vehicle should not obstruct the flow of other vehicles and pedestrians.

A. Right

B. Wrong

Answer: A

25. What is the main role of the seat belt when there is a collision?

A. to protect the driver and passengers necks

B. to protect the driver and passengers chests

C. to reduce the injuries of the driver and passengers

D. to protect the driver and passengers waists

Answer: C