湖南2025年摩托车科目一英文题库400题

1. When a motorcycle reaches a muddy or burst-and-muddy section, the driver should stop, observe and select the level and solid section or the section with vehicle tracks.

A. Right

B. Wrong

Answer: A

2. When driving in a heavy rain, drivers should contro their speed to prevent their vehicles from sliding.

A. Right

B. Wrong

Answer: A

3. Which is correct when changing lane?

A. turn on the directional signal and turn left quickly

B. reduce speed properly when entering the left lane

C. cannot interfere other vehicles

D. speed up to enter the left lane

Answer: C

4. Traffic Signs and traffic markings are not traffic signals.

A. Right

B. Wrong

Answer: B

5. What is the meaning of this sign?

A. bump road

B. high outburst road

C. low-lying road

D. hump bridge

Answer: B

6. Which is the wrong measure to avoid tire burst?

A. Reduce tire pressure

B. Check tires regularly

C. Remove foreign matters from the tire tread grooves timely

D. Replace tires that have cracks or deep cuts

Answer: A

7. The motorized vehicle driver who lives outside the jurisdiction of the issuing vehicle management station may apply to the vehicle management station at the place where he is living, for license change.

A. Right

B. Wrong

Answer: A

8. What is the meaning of this sign?

A. watch for pedestrians

B. crosswalk

C. village or town

D. primary school

Answer: C

9. When running on the road having maximum speed limit signs, the motorized vehicle is not allowed to exceed the marked maximum speed.

A. Right

B. Wrong

Answer: A

10. Before a motorized vehicle overtakes, the driver should turn on the left-turn signal, use the high and low beam lights alternately or honk in advance.

A. Right

B. Wrong

Answer: A

11. The wrong measure to use the brake of a motorcycle is to __________.

A. Simultaneously use the front and back brakes

B. Use the front brake first

C. Use the back brake first

D. Avoid using the front brake too early

Answer: B

12. When the driver discovers that steering is stiff, the wrong measure is to ___________.

A. Reduce speed and stop the vehicle as fast as possible

B. Stop at a safe place

C. Continue to drive

D. Identify the cause

Answer: C

13. How to use lights when changing to the left lane on road?

A. turn on the right-turn signal in advance

B. not need to turn on any turn signal

C. turn on the left-turn signal in advance

D. turn on the low beam lights in advance

Answer: C

14. Causing a traffic accident due to violating the law and regulations on road traffic safety is the rule-breaking act.

A. Right

B. Wrong

Answer: B

15. When a motorized vehicle crosses a non-motorized vehicle on a narrow road or a narrow bridge at night, the motorized vehicle should use the high beam light.

A. Right

B. Wrong

Answer: B

16. Sounding the horn on a foggy daY can arouse the attention of the opposite side. After hearing the horn from the opposite side, the driver should also sound their own horn to respond.

A. Right

B. Wrong

Answer: A

17. When the tire pressure is too low, what can happen when driving at a high speed?

A. Tire pressure will be unstable

B. Tire pressure will increase

C. Driving resistance will decrease

D. The tire will burst

Answer: D

18. What is the max speed when in or out of the lane for non-motorized vehicles?

A. 40km/hr

B. 50km/hr

C. 60km/hr

D. 30km/hr

Answer: D

19. A motorized vehicle is not allowed to stop in the section 50 meters to the intersection.

A. Right

B. Wrong

Answer: A

20. The driving license of a motorized vehicle driver will be detained after his penalty scores reach 12 points in a scoring circle.

A. Right

B. Wrong

Answer: A

21. If a motorized vehicle runs 50% faster than the specified speed limit, the driver is subject to a 3-point penalty.

A. Right

B. Wrong

Answer: B

22. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

23. When driving on road sections where safe sight distance is affected, such as the top of a ramp, what should drivers do to ensure safety?

A. Rush through

B. Use hazard lamp

C. Cut speed and sound the horn

D. Drive at will

Answer: C

24. What is the meaning of this sign?

A. slippery section

B. sharp curve

C. inverse curve

D. continuous curves

Answer: C

25. How should lamps be used when motor vehicle drivers pass through a two-way tunnel?

A. Turn on the hazard lamps

B. Turn on the high-beam

C. Turn on the fog lamp

D. Turn on the low-beam

Answer: D