泸州摩托车的英语考试

1. A motorized vehicle driver who deliberately covered or stained the license plate and placed the license plate unproperly, is subject to a ________.

A. 2-point penalty

B. 3-point penalty

C. 6-point penalty

D. 12-point penalty

Answer: D

2. What is the meaning of this sign?

A. embankment road

B. steep uphill road

C. continuous up slopes

D. steep downhill road

Answer: D

3. When passing a turn or a curve section, the driver should slow down and disengage the clutch.

A. Right

B. Wrong

Answer: B

4. When running on the road having maximum speed limit signs, the motorized vehicle is not allowed to exceed the marked maximum speed.

A. Right

B. Wrong

Answer: A

5. What is the meaning of this sign?

A. continuous down slopes

B. steep downhill road

C. steep uphill road

D. continuous up slopes

Answer: A

6. If the vehicle has no license plate, label of inspection or label of insurance, preserve the scene and immediately report to the police.

A. Right

B. Wrong

Answer: A

7. Illegally assembled motorized vehicle can be drived on road as long as it is thought to be safe.

A. Right

B. Wrong

Answer: B

8. You can not drive a motorized vehicle into the lane where the red X-shaped light or the red arrow light is on.

A. Right

B. Wrong

Answer: A

9. Max speed when pass the narrow road or brisge is _______

A. 50km/hr

B. 40km/hr

C. 30km/hr

D. 60km/hr

Answer: C

10. A motorized vehicle driver who uses other motorized vehicle’s license plate and vehicle license is subject to a 3-point penalty.

A. Right

B. Wrong

Answer: B

11. Before the motorized vehicle runs on the road, the driver should check the safety and technical performance of the vehicle.

A. Right

B. Wrong

Answer: A

12. What is the meaning of this sign?

A. bypass from left side

B. continuous curves

C. sharp left curve

D. sharp right curve

Answer: C

13. How to use lights when overtaking at night?

A. turn off the high beam light

B. turn on high beam lights

C. use fog lights

D. using the high and low beam lights alternately

Answer: D

14. When driving on a road covered with ice and snow, drivers tend to encounter glare caused by reflection of light rays from the road surface.

A. Right

B. Wrong

Answer: A

15. When two vehicles approach each other on a foggy day, what is the best method of safe driving?

A. Turn on the high-beam

B. Slowdown and maintain a large safety distance

C. Turn on the low-beam

D. Turn on the fog lamp

Answer: B

16. When passing an intersection, vehicle motor drivers are not allowed to overtake.

A. Right

B. Wrong

Answer: A

17. What is the meaning of this sign?

A. stopping temporarily is allowed

B. long stopping is allowed

C. no long stopping

D. no stopping

Answer: D

18. When driving on a long downhill road, which is the best way to control the speed?

A. Coast in neutral gear

B. Take a low gear

C. Depress the clutch

D. Pull up the handbrake

Answer: B

19. How to drive through the intersection without traffic lights?

A. reduce speed and go slowly

B. speed up and pass

C. let large vehicle go first

D. let the left vehicle go first

Answer: A

20. A motorized vehicle runs on the road without a label of inspection, the traffic police can detain the vehicle.

A. Right

B. Wrong

Answer: A

21. Driving license will be detained if you allow to drive your car.

A. driver during the period of probation

B. driver who has obtained a driving license

C. one whose driving license been revoked

D. one whose penalty points reach 6 points

Answer: C

22. Drivers who ride motorcycles are able to not wear safety helmets.

A. Right

B. Wrong

Answer: B

23. When a motor vehicle temporarily stops at night, which lamp should be turned on?

A. Front and rear fog lamp, clearance lamp and rear position lamp

B. Head lamp, clearance lamp and rear position lamp

C. Hazard lamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: C

24. The police can detain the vehicle if one drives a vehicle without ______

A. driving license

B. ID card

C. pass paper

D. qualification certificate

Answer: A

25. How to ensure motor vehicles have sufficient power when driving uphill?

A. Downshift before reducing speed

B. Downshift after reducing speed

C. Downshift when the speed is excessively low

D. Downshift to the fullest extent

Answer: A