连云港摩托车科目四题库英文

1. People who take a two-wheeled motorcycle should ride it by side way.

A. Right

B. Wrong

Answer: B

2. What is the meaning of this sign?

A. No long time honking

B. Honk discontinuously

C. Reduce speed and honk

D. No honking

Answer: D

3. What should the driver do when he/she sees this sign on the road?

A. Use emergency braking

B. Slow down and take a look

C. Sound the horn intermittently

D. Prepare to bypass

Answer: B

4. What should be done by the driver who intends to overtake but the motor vehicle in front neither reduces its speed nor allows the right of way?

A. Continuously sounding the horn and accelerating to overtake

B. Accelerating and continuing to overtake

C. Refraining from overtaking

D. Following the vehicle in front closely and finding a chance to overtake

Answer: C

5. When seeing this sign, the driver should reduce speed and observe the road conditions.

A. Right

B. Wrong

Answer: A

6. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

7. When a motor vehicle moves through water, the driver should try to maintain a constant speed and sufficient power and pass through without stopping.

A. Right

B. Wrong

Answer: A

8. When a tire blowout on the road, the driver should control the direction of the vehicle and use emergency braking to bring the motorcycle swiftly to a stop.

A. Right

B. Wrong

Answer: B

9. What should the driver do when he/she encounters an oncoming ambulance in the same lane?

A. Keep to the side and reduce speed or stop to yield

B. Drive ahead by occupying another lane

C. Yield by speeding up and changing lanes

D. Drive ahead in the original lane

Answer: A

10. When a motor vehicle temporarily stops in fog, which lamp should be turned on?

A. Hazard lamp, clearance lamp and rear position lamp

B. Left-turn indicator, clearance lamp and rear position amp

C. Headlamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: A

11. Which measures is correct when a motor vehicle intends to overtake

A. Use the high and low beam lights alternately to indicate the intention

B. Honk to indicate the vehicle

C. Speed up and overtake on the right side

D. Turn on the left-turn signal in advance

Answer: ABD

12. What is the meaning of this sign?

A. Passing by the right side

B. Passing by the left side

C. Running to right side

D. Running the roundabout

Answer: D

13. Turning on the high-beam is an effective way to improve visibility in fog weather.

A. Right

B. Wrong

Answer: B

14. What is the meaning of this sign?

A. Bump road

B. High outburst road

C. Low-lying road

D. Hump bridge

Answer: B

15. When using emergency brake, be aware of keeping the body of the motorcycle being perpendicular to the ground to avoid sideslip.

A. Right

B. Wrong

Answer: A

16. When the wounded person is suffering main artery bleeding, where should the rescue personnel press by thumb to stop the bleeding?

A. The artery near the heart

B. The artery lower to the wound

C. The artery further from the heart

D. The artery in the center of the wound

Answer: A

17. Which is the wrong measure to avoid tire burst?

A. Reduce tire pressure

B. Check tires regularly

C. Remove foreign matters from the tire tread grooves timely

D. Replace tires that have cracks or deep cuts

Answer: A

18. What is the meaning of this sign?

A. No going straight and no changing to left lane

B. No going straight and no left turn

C. Allowed to go straight and change to left lane

D. No going straight and no right turn

Answer: D

19. When a motor vehicle passes over an inundated road the driver should change to a low gear and pass at a constant speed.

A. Right

B. Wrong

Answer: A

20. When a motor vehicle encounters a burning phenomenon, it should leave the vehicle quickly so as not to cause injury or asphyxia to the respiratory tract.

A. Right

B. Wrong

Answer: A

21. How should lamps be used when motor vehicle drivers pass through a two-way tunnel?

A. Turn on the hazard lamps

B. Turn on the high-beam

C. Turn on the fog lamp

D. Turn on the low-beam

Answer: D

22. When the driver discovers that steering is stiff, the wrong measure is to ___________.

A. Reduce speed and stop the vehicle as fast as possible

B. Stop at a safe place

C. Continue to drive

D. Identify the cause

Answer: C

23. When a tire bursts suddenly on the road, the driver should refrain from violently depressing the brake pedal in panic. Instead, he/she should try his/her best to change to a low gear and use engine braking to reduce the speed of the vehicle.

A. Right

B. Wrong

Answer: A

24. Driving a motor vehicle in the downhill section of a mountain road avoids overtaking as much as possible because _______.

A. Vehicle resistance in downhill section is very high

B. Vehicles on downhill sections are more difficult to control than on flat roads due to gravity.

C. In downhill section, the front speed is faster and it is difficult to overtake.

D. Vehicles on downhill sections tend to be too fast due to gravity

Answer: BD

25. When the vehicles cross each other at night, what should the driver do if the vehicle coming in the opposite direction always use the high beam light.

A. Continuous change lights and honk to remind the vehicle coming in the opposite direction

B. Turn on the high beam light

C. Reduce speed or driving on the right side.

D. Move his sight to the right side to evade the light

Answer: CD