锡林郭勒盟摩托车科目一英语

1. When encountering an overflowing bridge, the driver should look at the situation, and passes through slowly before he makes sure that it is safe to do so.

A. Right

B. Wrong

Answer: A

2. Turn on the left-turn signal in advance when making a U turn on the road.

A. Right

B. Wrong

Answer: A

3. What is the meaning of this sign?

A. no honking the tweeter

B. no honking the woofer

C. should honk

D. no honking

Answer: C

4. How to ensure motor vehicles have sufficient power when driving uphill?

A. Downshift before reducing speed

B. Downshift after reducing speed

C. Downshift when the speed is excessively low

D. Downshift to the fullest extent

Answer: A

5. What should be checked before driving?

A. No parts need to be checked

B. Whether the tires have been cleaned

C. Where the spare tire is placed

D. The fastening and air pressure of tires

Answer: D

6. The motorcycles should be inspected once every year when it exceeds ____ as from the date of registration.

A. 1 year

B. 2 years

C. 3 years

D. 4 years

Answer: D

7. Which is subject to a 6-point penalty?

A. violate the traffic lights

B. drive school bus without qualification

C. drive the vehicle which permission is different

D. drive after drink

Answer: A

8. What is the meaning of this sign?

A. muddy road

B. low-lying road

C. overflowing road

D. ferry

Answer: C

9. In which situation that a driver cannot drive?

A. after drinking coffee

B. after drinking milk

C. after drinking

D. after drinking tea

Answer: C

10. What is the meaning of this sign?

A. no right turn

B. no U turn

C. no going straight

D. no left turn

Answer: C

11. If a person has caused a traffic accident and run away, and constitutes a crime, his driving license should be revoked and he is banned for lifetime from re-obtaining a driving license.

A. Right

B. Wrong

Answer: A

12. What dangerous acts can’t the driver conduct when driving downhill?

A. slide the vehicle in the neutral gear

B. driving in lower gear

C. braking to reduce speed

D. changing to the lower gear in advance

Answer: A

13. What is the meaning of this sign?

A. steep downhill road

B. continuous up slopes

C. steep uphill road

D. embankment road

Answer: C

14. What is the meaning of this sign?

A. no changing lane

B. no left turn

C. no going straight

D. no U turn

Answer: D

15. What is the meaning of this sign?

A. accident-prone section

B. construction section

C. reducing speed and going slowly section

D. jammed section

Answer: A

16. Which should be carried onboard?

A. insurance policy

B. vehicle license

C. certificate of ex-factory inspection

D. vehicle registration papers

Answer: B

17. What is the meaning of this sign?

A. road narrows on the left side

B. narrow bridge

C. narrow road

D. road narrows on the right side

Answer: B

18. How will the adhesive force of road change when speed increases on a damp and slippery road?

A. Increase sharply

B. increase gradually

C. decrease sharply

D. No change

Answer: C

19. The cycle for recording the accumulated penalty points for violating road traffic regulations is ____________.

A. 14 months

B. 12 months

C. 6 months

D. 10 months

Answer: B

20. What is the meaning of this sign?

A. bump road

B. high outburst road

C. low-lying road

D. hump bridge

Answer: B

21. What is the meaning of this sign?

A. no borrowing lane

B. no changing lane

C. no overtaking

D. no U turn

Answer: C

22. Causing a traffic accident due to violating the law and regulations on road traffic safety is the rule-breaking act.

A. Right

B. Wrong

Answer: B

23. A motorized vehicle is not allowed to stop in the section 50 meters to the intersection.

A. Right

B. Wrong

Answer: A

24. When driving, besides paying attention to keeping a safe distance from the vehicle in front, drivers should also be prudent when braking so as to avoid a rear-end collision caused by a vehicle behind.

A. Right

B. Wrong

Answer: A

25. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D