伊犁最新摩托车科目四试题库英文题

1. What is the meaning of this sign?

A. U turn

B. Reversing

C. Left turn

D. Bypassing

Answer: A

2. When a tire blowout on the road, the driver should swiftly depress the brake pedal to reduce speed and stop the vehicle.

A. Right

B. Wrong

Answer: B

3. When driving a motor vehicle crosses each other on a hump bridge, what should the driver do?

A. Rush to pass

B. Reduce speed

C. Honk to indicate the vehicle

D. Go on the right side

Answer: BCD

4. When running in a high speed, if only use the front brake, the driver can be easily thrown out due to the inertia.

A. Right

B. Wrong

Answer: A

5. When a motor vehicle passes over an overflowing bridge, what should the driver do after stopping and observing closely?

A. Change to a high gear and pass rapidly

B. Constantly observe the changes of the flow

C. Prepare to stop at any time

D. Change to a low gear and pass through at a constant speed

Answer: D

6. How should a motor vehicle follow the other vehicle In front when driving on a road covered with ice and snow?

A. Keep a long safe distance

B. Turn on hazard lamp

C. Change between high-and-low beam alternatively

D. Sound the horn in due time to give a notice to the vehicle in front

Answer: A

7. When overtaking a motor vehicles on uphill sections of a mountain road, the driver should _____.

A. Honk in advance

B. Forward cars are allowed to overtake before overtaking.

C. Turn on the left-turn signal in advance

D. Speed up direct and overtake

Answer: ABC

8. The wrong measure to use the brake of a motorcycle is to __________.

A. Simultaneously use the front and back brakes

B. Use the front brake first

C. Use the back brake first

D. Avoid using the front brake too early

Answer: B

9. Which lamp should be turned on when motor vehicles pass through a road section at night where the street light condition is good?

A. Front and rear fog lamps

B. Low-beam

C. High-beam

D. Hazard lamp

Answer: B

10. How to reduce speed or stop when driving on a road covered with snow and ice?

A. Take full advantage of driving brake

B. Take full advantage of the control power from engine

C. Take full advantage of parking brake

D. Take full advantage of speed retarder

Answer: B

11. What is the meaning of this sign?

A. Stop to yield

B. No stopping temporarily

C. No entry

D. No long stopping

Answer: A

12. When the engine suddenly stalls on the road, what should the driver do?

A. Stop the vehicle and overhaul it immediately

B. Immediately turn on the hazard lamps

C. Move the vehicle to a place where it will not obstruct the traffic flow

D. Set up a breakdown warning sign

Answer: BCD

13. When a rear tire of a motorcycle blows out, the driver should ________.

A. Swiftly turn the steering handlebar to adjust

B. Firmly hold the steering handlebar with both hands

C. Swiftly turn the steering handlebar to the opposite direction

D. Swiftly take braking measures

Answer: B

14. What should be done by motor vehicle drivers in order to yield politely to such pedestrians?

A. Speed up and bypass in front of the pedestrians

B. Speed up and bypass from behind the pedestrians

C. Reduce speed or stop to yield

D. Continuously sound the horn to alert the pedestrians

Answer: C

15. When finding a tire burst on the road, the driver should gently depress the brake pedal, reduce speed and stop the vehicle slowly.

A. Right

B. Wrong

Answer: A

16. When a motor vehicle temporarily stops in fog, which lamp should be turned on?

A. Hazard lamp, clearance lamp and rear position lamp

B. Left-turn indicator, clearance lamp and rear position amp

C. Headlamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: A

17. What should the driver do when the motor vehicle counters this situation?

A. Sound the horn continuously to warn

B. Speed up and bypass from the front

C. Slow down when encountering any risks

D. Slow down voluntarily and yield

Answer: D

18. Which lamp should be used when motor vehicles pass hrough an intersection at night where there is no traffic light signal?

A. High-beam

B. Low-beam

C. Hazard lamps

D. High-beam and low-beam should be used alternatively

Answer: D

19. What is the meaning of this sign?

A. School area

B. Watch for children

C. Crosswalk

D. Watch for pedestrians

Answer: B

20. When encountering a school bus which stops at the right roadside and students are embarking or disembarking, what should motor vehicle drivers do?

A. If there is only one motor vehicle lane in each direction, motor vehicle drivers behind the bus should stop and wait.

B. If there are two motor vehicle lanes in each direction, motor vehicle drivers in the left lane behind the bus may overtake the bus at a lower speed

C. If there are three motor vehicle lanes in each direction, motor vehicle drivers in the middle lane behind the bus should stop and wait

D. If there are three motor vehicle lanes in each direction, motor vehicle drivers in the left lane behind the bus may pass at a lower speed

Answer: ACD

21. When driving on a muddy roads, it is easy for wheels to sideslip or skid, which leads to traffic accidents.

A. Right

B. Wrong

Answer: A

22. What is the meaning of this sign?

A. Crosswalk lights

B. Watch for pedestrians

C. Attention to traffic lights

D. Intersection

Answer: C

23. When seeing this sign, the driver should reduce speed and observe the road conditions.

A. Right

B. Wrong

Answer: A

24. How to ensure safe driving at night?

A. Drive at speed limit

B. Cut speed and drive carefully

C. Maintain the current speed

D. Drive above the speed limit

Answer: B

25. How will the adhesive force of road change when speed increases on a damp and slippery road?

A. Increase sharply

B. Increase gradually

C. Decrease sharply

D. No change

Answer: C