濮阳摩托车驾照考试英文题库app下载

1. A motorized vehicle is not allowed to stop in the section 50 meters to the bridge, steep slope or tunnel.

A. Right

B. Wrong

Answer: A

2. Turning on the high-beam is an effective way to improve visibility in fog weather.

A. Right

B. Wrong

Answer: B

3. When a motorcycle turns at an excessively high speed, it can easily dash out of a curve or skid sideways.

A. Right

B. Wrong

Answer: A

4. Stopping temporarily on the road should not obstruct the passing of other vehicles and Pedestrians.

A. Right

B. Wrong

Answer: A

5. How to do if there is a traffic jam in intersection?

A. borrow the opposite lane to pass

B. stop and wait outside the intersection

C. cut in the front vehicles to pass

D. enter the intersection and wait

Answer: B

6. When encountering stopping and waiting in turn or slow-moving vehicles in front, the motorized vehicle may _________.

A. borrow road to overtake

B. occupy the opposite lane

C. follow the vehicles in front

D. cut in the waiting vehicles

Answer: C

7. A motorcycle is not permitted to tow other vehicles or to be towed by other vehicles.

A. Right

B. Wrong

Answer: A

8. Drivers should wear shoes or boots, which have heels and not skid soles, to ensure the acute, accurate, and reliable gear-shifting by feet.

A. Right

B. Wrong

Answer: A

9. What should be checked before driving?

A. No parts need to be checked

B. Whether the tires have been cleaned

C. Where the spare tire is placed

D. The fastening and air pressure of tires

Answer: D

10. When driving a motorcycle, the driver may wear slippers for the sake of safety.

A. Right

B. Wrong

Answer: B

11. What should motor vehicle drivers do when approaching an oncoming vehicle on a frozen road?

A. Cut speed as approaching each other

B. Pass each other by speeding up properly

C. Pass each other slowly by cutting speed in advance

D. Pass each other along the central line to the best

Answer: C

12. How to ensure safe driving at night?

A. Drive at speed limit

B. Cut speed and drive carefully

C. Maintain the current speed

D. Drive above the speed limit

Answer: B

13. The width of loaded goods should ______________ from a three-wheel motorcycle.

A. not exceed 0.15 meter

B. not exceed

C. not exceed 0.20 meter

D. not exceed 0.25 meter

Answer: B

14. What should a motorized vehicle has while running on the road?

A. a label of keeping distance

B. a label of reminding danger

C. a label of inspection

D. a label of product qualification

Answer: C

15. What is the meaning of this sign?

A. no left turn

B. leftt and right turn

C. no leftt and right turn

D. no right turn

Answer: B

16. Motor vehicle drivers don’t need to use any lamp at night when passing through a road section where the street light condition is good.

A. Right

B. Wrong

Answer: B

17. A person whose driving license has been destroyed cannot drive a motorized vehicle.

A. Right

B. Wrong

Answer: A

18. When a motorcycle passing through an interchange discovers it has chosen a wrong route, it should immediately make a U turn from where it is or reverse to change route.

A. Right

B. Wrong

Answer: B

19. What is the meaning of this sign?

A. steep downhill road

B. continuous up slopes

C. steep uphill road

D. embankment road

Answer: C

20. Before driving, it is necessary to check whether the cooling liquid, engine oil and fuel oil, are leaking.

A. Right

B. Wrong

Answer: A

21. According to regulations, motorcycle driver and passenger should wear helmets.

A. Right

B. Wrong

Answer: A

22. When following a vehicle on the road, the distance from the vehicle in front is not important. As long as the driver goes forward at the same speed as the vehicle in front does, he/she can avoid a rear-end collision.

A. Right

B. Wrong

Answer: B

23. Max speed when pass the narrow road or brisge is _______

A. 50km/hr

B. 40km/hr

C. 30km/hr

D. 60km/hr

Answer: C

24. How will the adhesive force of road change when speed increases on a damp and slippery road?

A. Increase sharply

B. increase gradually

C. decrease sharply

D. No change

Answer: C

25. When approaching a sharp curve, motor vehicle drivers should reduce speed only after entering the curve.

A. Right

B. Wrong

Answer: B