西安摩托车英文驾考题库app手机版

1. Motor vehicle drivers may borrow a special lane for other vehicle types, if one exists, to overtake.

A. Right

B. Wrong

Answer: B

2. After setting off from a roadside, motor vehicle drivers should watch both sides of the road, turn left and drive into the normal lane slowly.

A. Right

B. Wrong

Answer: A

3. When a motorcycle is making a turn in a high speed, the driver should avoid using the brake or use the brake less to prevent sideslip.

A. Right

B. Wrong

Answer: A

4. What is the max speed when down slope, turning around and U turn?

A. 50km/hr

B. 60km/hr

C. 30km/hr

D. 40km/hr

Answer: C

5. How to ensure motor vehicles have sufficient power when driving uphill?

A. Downshift before reducing speed

B. Downshift after reducing speed

C. Downshift when the speed is excessively low

D. Downshift to the fullest extent

Answer: A

6. What is the meaning of this sign?

A. school area

B. watch for children

C. crosswalk

D. watch for pedestrians

Answer: B

7. Traffic Police can detain the accident vehicle according to law if it needs to be collected evidence of the road accident.

A. Right

B. Wrong

Answer: A

8. Which illegal conduct is subject to a 12-point penalty?

A. violate traffic lights

B. use falsified license plate

C. call or answer the mobile phone

D. violate prohibitive signs

Answer: B

9. When a motorcycle turns at an excessively high speed, it can easily dash out of a curve or skid sideways.

A. Right

B. Wrong

Answer: A

10. When driving on a snowy day, drivers should follow the tracks on the road before them.

A. Right

B. Wrong

Answer: A

11. What is the meaning of this sign?

A. sharp right curve

B. bypass from right side

C. continuous curves

D. sharp left curve

Answer: A

12. In which situation that a driver will not allowed to drive?

A. penalty points reach 10 points

B. penalty points reach 6 points

C. driving license lost or destroyed

D. driving license is nearly expired

Answer: C

13. What is the meaning of this sign?

A. continuous down slopes

B. steep downhill road

C. steep uphill road

D. continuous up slopes

Answer: A

14. Serious wave will appear when the front tire blows out; the driver should release the accelerator, firmly hold the steering wheel with both hands, quickly gradually break down, and stop to yield.

A. Right

B. Wrong

Answer: A

15. While driving a motorcycle, nothing is permitted to hang on the handlebars.

A. Right

B. Wrong

Answer: A

16. When a driver drives a motorized vehicle during the period of probation, the driver should paste or hang a uniform probation mark on the rear part of the vehicle.

A. Right

B. Wrong

Answer: A

17. Motorized vehicles should pass the intersections according to the traffic signals.

A. Right

B. Wrong

Answer: A

18. What is the max speed when passing a level crossing?

A. 15km/hr

B. 20km/hr

C. 30km/hr

D. 40km/hr

Answer: C

19. When driving a motorized vehicle uphill, you should speed up and honk when you going to reach the top of the slope.

A. Right

B. Wrong

Answer: B

20. Which of the following vehicle in front in the same lane is not allowed to be overtaken?

A. the vehicle is making a stop

B. the vehicle is reducing speed to yield

C. the vehicle is taking a U turn

D. the vehicle is running normally

Answer: C

21. When a motor vehicle passes over an inundated road drivers should change to a high gear and pass rapidly.

A. Right

B. Wrong

Answer: B

22. Before the motorized vehicle runs on the road, the driver should check the safety and technical performance of the vehicle.

A. Right

B. Wrong

Answer: A

23. Traffic Police can detain the vehicle according to law if it is suspected of using the label of inspection from other vehicle.

A. Right

B. Wrong

Answer: A

24. A motorized vehicle driver who uses falsified and altered vehicle license is subject to a ________.

A. 6-point penalty

B. 3-point penalty

C. 2-point penalty

D. 12-point penalty

Answer: D

25. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D