阿拉善盟摩托车科目四考试英文

1. When driving on a rough road, the driver should use low gear to keep low speed; try to choose roads with big pits to reduce bumpy feeling.

A. Right

B. Wrong

Answer: B

2. When a tire blowout on the road, the driver should control the direction of the vehicle and use emergency braking to bring the vehicle swiftly to a stop.

A. Right

B. Wrong

Answer: B

3. When two vehicles approach each other on a foggy day, what is the best method of safe driving?

A. Turn on the high-beam

B. Slowdown and maintain a large safety distance

C. Turn on the low-beam

D. Turn on the fog lamp

Answer: B

4. When driving into the traffic flow on a main road from a relief road, drivers should speed up.

A. Right

B. Wrong

Answer: B

5. Driving a motor vehicle in the downhill section of a mountain road avoids overtaking as much as possible because _______.

A. Vehicle resistance in downhill section is very high

B. Vehicles on downhill sections are more difficult to control than on flat roads due to gravity.

C. In downhill section, the front speed is faster and it is difficult to overtake.

D. Vehicles on downhill sections tend to be too fast due to gravity

Answer: BD

6. Turning on the high-beam is an effective way to improve visibility in fog weather.

A. Right

B. Wrong

Answer: B

7. Where should we choose to park?

A. Parking spaces on roads

B. Construction section

C. Crosswalk

D. Parking lot

Answer: AD

8. Which lamp should be turned on when motor vehicles pass through a road section at night where the street light condition is good?

A. Front and rear fog lamps

B. Low-beam

C. High-beam

D. Hazard lamp

Answer: B

9. When encountering dangerous and complicated circumstance, the driver should keep medium or low speed and keep the balance of the motorcycle to pass it cautiously.

A. Right

B. Wrong

Answer: A

10. When parking temporarily on a snowy day, drivers should turn on the headlamp and fog lamp.

A. Right

B. Wrong

Answer: B

11. When passing through a tunnel, the wrong measure is to ___________.

A. Keep safe distance when two vehicles cross each other

B. Driving with the low beam light

C. Use the hight beam light when two vehicles cross each other

D. Overtaking in the tunnel

Answer: CD

12. When a motor vehicle encounters an accident, the driver should pay attention to whether there is fuel leakage, pipeline rupture, so as avoid accidents.

A. Right

B. Wrong

Answer: A

13. When the vehicles cross each other at night, what should the driver do if the vehicle coming in the opposite direction don’t turn off the high beam light?

A. Reduce speed for yield or stop on the right side.

B. Continuous change lights to remind the vehicle coming in the opposite direction

C. Turn on the high lights and force the coming car to change the lights

D. Move his sight to the right side to evade the light

Answer: ABC

14. There is a risk of overtaking when driving a motor vehicle approaches the top of the slope on a mountainous road, because _____.

A. When approaching the top of the slope, the line of sight is blocked and it is impossible to observe the traffic situation.

B. When approaching the top of the slope, the line of sight is blocked. It is impossible to observe whether there are obstacles behind the top of the slope.

C. The speed is slower when approaching the top of the slope.

D. When approaching the top of the slope, the line of sight is blocked and the road direction behind the top of the slope can not be observed.

Answer: ABD

15. Matches, sulfur and red phosphorus are _________.

A. Explosives

B. Inflammable solid materials

C. Self-igniting articles

D. Oxidizing materials

Answer: B

16. When a motor vehicle temporarily stops in fog, which lamp should be turned on?

A. Hazard lamp, clearance lamp and rear position lamp

B. Left-turn indicator, clearance lamp and rear position amp

C. Headlamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: A

17. Which of the following measures is correct for rescuing a person sustaining full-body burns?

A. Cover the fire with sandy soil

B. Spray cool water to his body

C. Put out the fire by extinguisher

D. Help to remove the burning clothes

Answer: B

18. When a gas tanker is leaking heavily, which of the following measures is wrong?

A. Cut off the power

B. Wear gas mask and protect gloves

C. Turn off the valve to stop leaking

D. Evacuate people to the leeward side

Answer: D

19. Motor vehicle drivers don’t need to use any lamp at night when passing through a road section where the street light condition is good.

A. Right

B. Wrong

Answer: B

20. When a motor vehicle passes over an overflowing bridge, what should the driver do after stopping and observing closely?

A. Change to a high gear and pass rapidly

B. Constantly observe the changes of the flow

C. Prepare to stop at any time

D. Change to a low gear and pass through at a constant speed

Answer: D

21. Whats the meaning of the double white solid lines in far front of the intersection?

A. Stopping and yield line

B. Slowdown and yield line

C. Left-turn waiting line

D. Waiting to run line

Answer: A

22. What is the meaning of this sign?

A. Continuous down slopes

B. Steep downhill road

C. Steep uphill road

D. Continuous up slopes

Answer: A

23. Which of the following is a safe way for motor vehicles to pass the intersection marked with this sign?

A. Stop and observe the traffic situation around the intersection

B. Approach the intersection by speeding up

C. Observe the traffic situation on the left rear side

D. Approach the intersection at a reduced speed

Answer: D

24. Gun powder, explosives and detonating powder belong to which of the following dangerous chemicals?

A. Oxidizing materials

B. Inflammable solid materials

C. Explosives

D. Self-igniting articles

Answer: C

25. When a motor vehicle reaches a muddy or burst-and-muddy section of the road, the driver should stop, observe and select a level and solid section or a section with vehicle tracks.

A. Right

B. Wrong

Answer: A