漳州摩托车科目四题库英文

1. When a bicycle borrows the motor vehicle lane, the motor vehicle may sound the horn hurriedly to warn the bicycle to yield.

A. Right

B. Wrong

Answer: B

2. It is unsafe to ride a motorcycle by high-heel shoes.

A. Right

B. Wrong

Answer: A

3. When a rear tire of a motorcycle blows out, the driver should ________.

A. Swiftly turn the steering handlebar to adjust

B. Firmly hold the steering handlebar with both hands

C. Swiftly turn the steering handlebar to the opposite direction

D. Swiftly take braking measures

Answer: B

4. What is the meaning of this sign?

A. Road narrows on the left side

B. Narrow bridge

C. Narrow road

D. Road narrows on the right side

Answer: B

5. A correct measure to avoid tire burst of motor vehicles is to lower the tire pressure.

A. Right

B. Wrong

Answer: B

6. Which measures is correct when a motor vehicle intends to overtake

A. Use the high and low beam lights alternately to indicate the intention

B. Honk to indicate the vehicle

C. Speed up and overtake on the right side

D. Turn on the left-turn signal in advance

Answer: ABD

7. What should be done by the driver who intends to overtake but the motor vehicle in front neither reduces its speed nor allows the right of way?

A. Continuously sounding the horn and accelerating to overtake

B. Accelerating and continuing to overtake

C. Refraining from overtaking

D. Following the vehicle in front closely and finding a chance to overtake

Answer: C

8. How to do in this intersection?

A. Wait in the cross-hatched marking area

B. stop and wait outside the intersection

C. Follow the vehicle in front and pass

D. Wait inside the intersection

Answer: B

9. What is the meaning of this sign?

A. More vehicles section

B. Passing slowly

C. Jammed section

D. Construction section

Answer: B

10. What kind of harmful effect will be brought about by continuously using the foot brake on a long downhill road?

A. Shorten the engine’s service life

B. Make the driver feel tired

C. Easily cause the vehicle to overturn

D. Reduce the braking efficiency

Answer: D

11. Which lamp should be used when motor vehicles pass hrough an intersection at night where there is no traffic light signal?

A. High-beam

B. Low-beam

C. Hazard lamps

D. High-beam and low-beam should be used alternatively

Answer: D

12. Which of the following measures is incorrect when a motor vehicle stops?

A. Stop at a stipulated place

B. Avoid stopping on pedestrian streets

C. Avoid obstructing the passing of other motor vehicles and pedestrians when temporarily stops on the road

D. Stop on the non-motor vehicle lane

Answer: D

13. When encountering pedestrians slowly cross the road in a residential area, the driver should sound the horn continuously.

A. Right

B. Wrong

Answer: B

14. How should the driver pass this place safely?

A. Speed up and pass in the front of the pedestrians

B. Bypass behind the pedestrians

C. Slow down and sound the horn

D. Stop and wait until the pedestrians pass

Answer: D

15. What is the meaning of this sign?

A. Steep downhill road

B. Continuous up slopes

C. Steep uphill road

D. Embankment road

Answer: C

16. Whats the meaning of the double white solid lines in far front of the intersection?

A. Stopping and yield line

B. Slowdown and yield line

C. Left-turn waiting line

D. Waiting to run line

Answer: A

17. When the motor vehicle encounters a crosswalk in this situation, the driver may speed up and pass rapidly.

A. Right

B. Wrong

Answer: B

18. How to ensure safe driving at night?

A. Drive at speed limit

B. Cut speed and drive carefully

C. Maintain the current speed

D. Drive above the speed limit

Answer: B

19. When a motor vehicle temporarily stops at night, which lamp should be turned on?

A. Front and rear fog lamp, clearance lamp and rear position lamp

B. Head lamp, clearance lamp and rear position lamp

C. Hazard lamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: C

20. What is the most frequent problem for driving on a muddy road?

A. High resistance force

B. Sideways slide

C. The motor vehicle bumps

D. Steering failure

Answer: B

21. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

22. Sounding the horn on a foggy daY can arouse the attention of the opposite side. After hearing the horn from the opposite side, the driver should also sound their own horn to respond.

A. Right

B. Wrong

Answer: A

23. Under such circumstances, what should be done by motor vehicle drivers in order to yield to the pedestrians politely?

A. Set off after pedestrians pass

B. Set off and bypass in front of the pedestrians

C. Sound the horn to warn the pedestrians to yield

D. Set off and approach the pedestrians slowly

Answer: A

24. When using splints, sticks or tree branches to keep the unexposed bones in position, it is necessary that these things should exceed the upper and lower joints of the wound.

A. Right

B. Wrong

Answer: A

25. When driving on a road covered with ice and snow, drivers tend to encounter glare caused by reflection of light rays from the road surface.

A. Right

B. Wrong

Answer: A