安顺摩托车科目四英语试题

1. How will the adhesive force of road change when speed increases on a damp and slippery road?

A. Increase sharply

B. Increase gradually

C. Decrease sharply

D. No change

Answer: C

2. Driving and smoking has no negative effect on safe driving

A. Right

B. Wrong

Answer: B

3. Gun powder, explosives and detonating powder belong to which of the following dangerous chemicals?

A. Oxidizing materials

B. Inflammable solid materials

C. Explosives

D. Self-igniting articles

Answer: C

4. What is the meaning of this sign?

A. Driving at reduced speed in the section of 40 meters

B. Minimum speed is 40km/hr

C. Maximum speed is 40km/hr

D. 40km/hr speed limit ban is lifted

Answer: D

5. In such road sections, you can enter the cross-hatched marking area to wait.

A. Right

B. Wrong

Answer: B

6. What is the meaning of this sign?

A. A manned level crossing

B. Multi-crossing of railway and road

C. Grade separation level crossing

D. An unmanned level crossing

Answer: A

7. Which lamp should be used when motor vehicles pass hrough an intersection at night where there is no traffic light signal?

A. High-beam

B. Low-beam

C. Hazard lamps

D. High-beam and low-beam should be used alternatively

Answer: D

8. When a motorcycle is making a turn in a high speed, the driver should avoid using the brake or use the brake less to prevent sideslip.

A. Right

B. Wrong

Answer: A

9. When the vehicles cross each other at night, what should the driver do if the vehicle coming in the opposite direction always use the high beam light.

A. Continuous change lights and honk to remind the vehicle coming in the opposite direction

B. Turn on the high beam light

C. Reduce speed or driving on the right side.

D. Move his sight to the right side to evade the light

Answer: CD

10. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

11. What should the driver do if he/she encounters pedestrians in this situation at an intersection?

A. Slow down promptly and stop to yield

B. Sound the horn to warn the pedestrians to yield

C. Speed up and pass in front of the pedestrians

D. Turn on the headlamps to warn the pedestrians to yield

Answer: A

12. Driving a motor vehicle in the downhill section of a mountain road avoids overtaking as much as possible because _______.

A. Vehicle resistance in downhill section is very high

B. Vehicles on downhill sections are more difficult to control than on flat roads due to gravity.

C. In downhill section, the front speed is faster and it is difficult to overtake.

D. Vehicles on downhill sections tend to be too fast due to gravity

Answer: BD

13. When a vehicle stops temporarily at the roadside at night, the wrong measure is to ______.

A. Turn on the warning flash light

B. Turn on the contour light

C. Turn on the high beam light

D. Turn off all lights

Answer: CD

14. When passing a turn or a curve section, the driver should slow down and disengage the clutch.

A. Right

B. Wrong

Answer: B

15. What is the purpose of checking before driving?

A. Confirm whether the tyres of motor vehicles are damaged or not

B. Confirm whether there is a safety hazard near the vehicle.

C. Confirm whether there are obstacles around the vehicle

D. Confirm whether the road in front of the vehicle is safe

Answer: ABCD

16. How to reduce speed or stop when driving on a road covered with snow and ice?

A. Take full advantage of driving brake

B. Take full advantage of the control power from engine

C. Take full advantage of parking brake

D. Take full advantage of speed retarder

Answer: B

17. What is the meaning of this sign?

A. Intersection

B. Ring intersection

C. T-shaped intersection

D. Y-shaped intersection

Answer: A

18. There is a risk of overtaking when driving a motor vehicle approaches the top of the slope on a mountainous road, because _____.

A. When approaching the top of the slope, the line of sight is blocked and it is impossible to observe the traffic situation.

B. When approaching the top of the slope, the line of sight is blocked. It is impossible to observe whether there are obstacles behind the top of the slope.

C. The speed is slower when approaching the top of the slope.

D. When approaching the top of the slope, the line of sight is blocked and the road direction behind the top of the slope can not be observed.

Answer: ABD

19. What is the meaning of this sign?

A. The lane for non-motorized vehicles

B. Yield non-motorized vehicles

C. No passing for non-motorized vehicles

D. Watch for non-motorized vehicles

Answer: D

20. The wrong measure to ride a motorcycle in summer is to __________.

A. Drive at a high speed for a long time

B. Control the speed by the accelerator

C. Avoid using the brake

D. Avoid loading people or cargoes

Answer: A

21. When driving, the driver should yield to _______.

A. Ambulance

B. Fire engine

C. School bus

D. Police car

Answer: ABCD

22. Which lamp should be turned on when motor vehicles pass through a road section at night where the street light condition is good?

A. Front and rear fog lamps

B. Low-beam

C. High-beam

D. Hazard lamp

Answer: B

23. Drivers neednt yield to pedestrians who display such behavior.

A. Right

B. Wrong

Answer: B

24. What is the meaning of this sign?

A. Bump road

B. Low-lying road

C. High outburst road

D. Hump bridge

Answer: B

25. What should be done by motor vehicle drivers in order to yield politely to such pedestrians?

A. Speed up and bypass in front of the pedestrians

B. Speed up and bypass from behind the pedestrians

C. Reduce speed or stop to yield

D. Continuously sound the horn to alert the pedestrians

Answer: C