嘉峪关最新摩托车科目四试题库英文题

1. When the vehicles cross each other at night, what should the driver do if the vehicle coming in the opposite direction always use the high beam light.

A. Continuous change lights and honk to remind the vehicle coming in the opposite direction

B. Turn on the high beam light

C. Reduce speed or driving on the right side.

D. Move his sight to the right side to evade the light

Answer: CD

2. Driving a motor vehicle in the downhill section of a mountain road avoids overtaking as much as possible because _______.

A. Vehicle resistance in downhill section is very high

B. Vehicles on downhill sections are more difficult to control than on flat roads due to gravity.

C. In downhill section, the front speed is faster and it is difficult to overtake.

D. Vehicles on downhill sections tend to be too fast due to gravity

Answer: BD

3. There is a risk of overtaking when driving a motor vehicle approaches the top of the slope on a mountainous road, because _____.

A. When approaching the top of the slope, the line of sight is blocked and it is impossible to observe the traffic situation.

B. When approaching the top of the slope, the line of sight is blocked. It is impossible to observe whether there are obstacles behind the top of the slope.

C. The speed is slower when approaching the top of the slope.

D. When approaching the top of the slope, the line of sight is blocked and the road direction behind the top of the slope can not be observed.

Answer: ABD

4. When a tire blowout on the road, the driver should control the direction of the vehicle and use emergency braking to bring the motorcycle swiftly to a stop.

A. Right

B. Wrong

Answer: B

5. When a motorcycle goes downhill, it may fully use the neutral gear and slide.

A. Right

B. Wrong

Answer: B

6. When approaching another vehicle at night, why should the driver alternate between high-and-low-beam at a distance more than 150 meters?

A. Warn each other before passing

B. Driving habit

C. Easy to observe the situation ahead from either side

D. Courtesy

Answer: C

7. Which of the following is a basic requirement for rescuing the injured at the scene of a traffic accident?

A. Treat wounds first and safe life later

B. Save life first and treat wounds later

C. Help lightly wounded persons first

D. Help seriously wounded persons later

Answer: B

8. A correct measure to avoid tire burst of motor vehicles is to lower the tire pressure.

A. Right

B. Wrong

Answer: B

9. When driving on a muddy road, what should the driver do?

A. Try to avoid using the foot brake

B. Stop and observe the road ahead

C. Avoid shifting halfway as much as possible

D. Put in low gear ahead of time

Answer: ABCD

10. When driving in thick or extremely thick fog, what should the driver do due to the low visibility in such weather?

A. Turn on the headlamp and drive slowly

B. Turn on the fog lamp and drive slowl

C. Park in a safe place

D. Drive slowly close to the roadside

Answer: C

11. Which will affect the stopping distance?

A. Pavement conditions

B. Driver’s reaction time

C. The quantity of cargo and the structure of brake, etc.

D. The vehicle speed

Answer: ABCD

12. What is the meaning of this sign?

A. Customs inspection

B. Stop-for-inspection

C. Frontier inspection

D. No passing

Answer: B

13. Gun powder, explosives and detonating powder belong to which of the following dangerous chemicals?

A. Oxidizing materials

B. Inflammable solid materials

C. Explosives

D. Self-igniting articles

Answer: C

14. When a motorcycle braking on a road covered by ice and snow, the driver should adopt point braking and prepare their feet for landing when braking.

A. Right

B. Wrong

Answer: A

15. What is the meaning of this sign?

A. Watch for pedestrians

B. Watch for children

C. School area

D. Crosswalk

Answer: A

16. When a fast-running vehicle makes a sharp turn, it can very easily cause side collision or an overturn due to the centrifugal force.

A. Right

B. Wrong

Answer: A

17. When passing another vehicle on a foggy day, what should drivers do?

A. Slow down and pass slowly

B. Maintain a safety distance

C. Properly use lamps

D. Drive at a high speed

Answer: ABC

18. A motorcycle driver should wear long-sleeve and long-trouser-leg clothes with brilliant color so that he can be easy found by other transports participants when he is riding.

A. Right

B. Wrong

Answer: A

19. When driving in icy and snowy weather, because of the reduction of the stability, it is easy for the wheels to race or slip when rapidly speeding up.

A. Right

B. Wrong

Answer: A

20. Speeding up to go though the intersection before the light turns to red in this case.

A. Right

B. Wrong

Answer: B

21. When a vehicle stops temporarily at the roadside at night, the wrong measure is to ______.

A. Turn on the warning flash light

B. Turn on the contour light

C. Turn on the high beam light

D. Turn off all lights

Answer: CD

22. When a motorcycle turns at an excessively high speed, it can easily dash out of a curve or skid sideways.

A. Right

B. Wrong

Answer: A

23. How will the adhesive force of road change when speed increases on a damp and slippery road?

A. Increase sharply

B. Increase gradually

C. Decrease sharply

D. No change

Answer: C

24. When a motor vehicle moves through water, the driver should try to maintain a constant speed and sufficient power and pass through without stopping.

A. Right

B. Wrong

Answer: A

25. Which lamp should be used when motor vehicles pass hrough an intersection at night where there is no traffic light signal?

A. High-beam

B. Low-beam

C. Hazard lamps

D. High-beam and low-beam should be used alternatively

Answer: D