本溪摩托车科目四英语

1. When passing through a tunnel, the wrong measure is to ___________.

A. Keep safe distance when two vehicles cross each other

B. Driving with the low beam light

C. Use the hight beam light when two vehicles cross each other

D. Overtaking in the tunnel

Answer: CD

2. Keep enough safe distance When a motor vehicle follows another vehicle, because ______.

A. Avoke a rear-end collision

B. The closer you get to the vehicle, the less easy it is to grasp the situation ahead of the vehicle.

C. Enough distance to avoid emergencies

D. Prevent being unable to detect the front vehicle brake in time due to the damage rear lamp of the front vehicle

Answer: ABCD

3. When driving a motor vehicle near an intersection, the vehicle may speed up and honk to pass.

A. Right

B. Wrong

Answer: B

4. What are the driving behaviors that cause accidents when a motor vehicle turns to a turning road?

A. Vehicles occupy opposite lanes

B. Turn the steering wheel sharply in the bend

C. Do not slow down before turning

D. Motor vehicles drive on the right side of the road

Answer: ABC

5. What is the meaning of this sign?

A. Downhill section on right side

B. Driving by the right side of the road

C. Stopping by the right side of the road

D. Right turn only

Answer: B

6. If a driver finds there is no vehicle behind, he/she may change lanes without turning on the indicator.

A. Right

B. Wrong

Answer: B

7. When a tire blowout on the road, the driver should control the direction of the vehicle and use emergency braking to bring the vehicle swiftly to a stop.

A. Right

B. Wrong

Answer: B

8. When the driver discovers a tire is leaking and steers the vehicle off the main driving lane, he/she should refrain from applying emergency braking so as to avoid a vehicle turnover or a rear-end collision arising from the late braking of the vehicle behind.

A. Right

B. Wrong

Answer: A

9. When driving on a muddy road, what should the driver do?

A. Try to avoid using the foot brake

B. Stop and observe the road ahead

C. Avoid shifting halfway as much as possible

D. Put in low gear ahead of time

Answer: ABCD

10. What is the meaning of this sign?

A. Going straight and right turn

B. Going straight and left turn

C. No going straight and no left turn

D. Right turn and left turn only

Answer: B

11. Which of the following is an inflammable solid material?

A. Matches

B. Fireworks

C. Calcium carbide

D. Explosives

Answer: A

12. What is the meaning of this sign?

A. Crosswalk

B. Students’ passage

C. Watch for pedestrians

D. Children’s passage

Answer: A

13. When the tire pressure is too low, what can happen when driving at a high speed?

A. Tire pressure will be unstable

B. Tire pressure will increase

C. Driving resistance will decrease

D. The tire will burst

Answer: D

14. When driving a motor vehicle following anther vehicle, What should the driver pay attention to?

A. When following a taxi, it is necessary to prevent it from pulling over at any time to get on and off passengers.

B. For large trucks loaded with goods, we should increase the distance between cars and avoid long time follow ups to prevent the risk of cargo spilling and blind areas.

C. When the current side of the vehicle has an internship sign, it should increase the distance with the vehicle to prevent the front vehicle emergency braking.

D. Follow a vehicle in foggy weather, pay attention to the emergency braking of the front vehicle

Answer: ABCD

15. What is the meaning of this sign?

A. No left turn

B. Leftt and right turn

C. No leftt and right turn

D. No right turn

Answer: B

16. When a motor vehicle temporarily stops at night, which lamp should be turned on?

A. Front and rear fog lamp, clearance lamp and rear position lamp

B. Head lamp, clearance lamp and rear position lamp

C. Hazard lamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: C

17. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

18. After a traffic accident, what is the most effective measure to prevent secondary accidents?

A. Evacuate all passengers

B. Turn on the hazard lamps

C. Mark the original place of the injured persons

D. Properly place the danger warning sign

Answer: ABD

19. The first-aid measure to rescue a poisoned person is to _______.

A. Take warming-up measures

B. Bring him to a place where air is fresh

C. Give him artificial respiration

D. Depress the heart over the chest

Answer: B

20. Driving a motor vehicle in the downhill section of a mountain road avoids overtaking as much as possible because _______.

A. Vehicle resistance in downhill section is very high

B. Vehicles on downhill sections are more difficult to control than on flat roads due to gravity.

C. In downhill section, the front speed is faster and it is difficult to overtake.

D. Vehicles on downhill sections tend to be too fast due to gravity

Answer: BD

21. When rescuing a wounded person suffering spinal fracture, it is necessary to ___________.

A. Take warm-keeping measure

B. Use soft stretcher to carry

C. Use sling to keep in position

D. Help the wounded person to move

Answer: C

22. When rescuing the injured, it is necessary to ________.

A. Save life first and treat the wounds later

B. Treat the wounds first and safe life later

C. Help the slightly wounded persons first

D. Help the seriously wounded persons later

Answer: A

23. How should lamps be used by the motor vehicle driver who follows a vehicle on a road section at night where he street light condition is good?

A. Turn off the headlamp

B. Use high-beam

C. Turn off all lamps

D. Use low-beam

Answer: D

24. What marking is the road mark?

A. Crosswalk ahead

B. Intersection ahead

C. Reduce speed and yield ahead

D. Stop to yield ahead

Answer: A

25. The drivers, loaders and supercargoes responsible for dangerous chemicals transportation should all full understand the chemical characteristics, potential risks, features of the packaging containers and emergency measures for any unexpected accidents.

A. Right

B. Wrong

Answer: A