莱芜摩托车科目四英文题库

1. Which will affect the stopping distance?

A. Pavement conditions

B. Driver’s reaction time

C. The quantity of cargo and the structure of brake, etc.

D. The vehicle speed

Answer: ABCD

2. When a rear tire of a motorcycle blows out, the driver should ________.

A. Swiftly turn the steering handlebar to adjust

B. Firmly hold the steering handlebar with both hands

C. Swiftly turn the steering handlebar to the opposite direction

D. Swiftly take braking measures

Answer: B

3. When there is bleeding at the bone fracture of a wounded person, the first thing to do is to fix the wounded part in position, then stop the bleeding and dress the wound.

A. Right

B. Wrong

Answer: B

4. When an erosive material catches fire, it should not be put out with water cannon.

A. Right

B. Wrong

Answer: A

5. Matches, sulfur and red phosphorus are _________.

A. Explosives

B. Inflammable solid materials

C. Self-igniting articles

D. Oxidizing materials

Answer: B

6. When a motorcycle passing through an interchange discovers it has chosen a wrong route, it should immediately make a U turn from where it is or reverse to change route.

A. Right

B. Wrong

Answer: B

7. What are the main reason for slow driving of motorized vehicles on rainy days?

A. Braking distance will increase

B. The driver’s view islimited

C. Emergency braking can easily cause side skidding

D. Fast driving increases fuel consumption

Answer: ABC

8. When two vehicles approach each other on a foggy day, what is the best method of safe driving?

A. Turn on the high-beam

B. Slowdown and maintain a large safety distance

C. Turn on the low-beam

D. Turn on the fog lamp

Answer: B

9. What is the meaning of this sign?

A. Stopping temporarily is allowed

B. Long stopping is allowed

C. No long stopping

D. No stopping

Answer: D

10. When a motor vehicle stops in snow, which lamp should be turned on?

A. Front and rear fog lamps, clearance lamp and rear position lamp

B. Reverse lamp, clearance lamp and rear position lamp

C. Headlamp, clearance lamp and rear position lamp

D. Hazard lamps, clearance lamp and rear position lamp

Answer: D

11. Which of the following is a basic requirement for rescuing the injured at the scene of a traffic accident?

A. Treat wounds first and safe life later

B. Save life first and treat wounds later

C. Help lightly wounded persons first

D. Help seriously wounded persons later

Answer: B

12. When approaching a vehicle on a narrow slope, which one of the following ways is correct?

A. The descending vehicle yields to the ascending

B. The vehicle which is further from the slope crest should yield

C. The ascending vehicle yields to the descending

D. If the descending vehicle has reached the midpoint while the ascending vehicle has not yet set out, the descending vehicle must yield.

Answer: A

13. When a motor vehicle temporarily stops in fog, which lamp should be turned on?

A. Hazard lamp, clearance lamp and rear position lamp

B. Left-turn indicator, clearance lamp and rear position amp

C. Headlamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: A

14. Keep enough safe distance When a motor vehicle follows another vehicle, because ______.

A. Avoke a rear-end collision

B. The closer you get to the vehicle, the less easy it is to grasp the situation ahead of the vehicle.

C. Enough distance to avoid emergencies

D. Prevent being unable to detect the front vehicle brake in time due to the damage rear lamp of the front vehicle

Answer: ABCD

15. What needs attention when a motor vehicle drives on a road covered with ice and snow?

A. Braking length is extended

B. Anti-skating resistance will be greater

C. The adhesive force of the road will be greater

D. The braking length will be shorter

Answer: A

16. When driving in thick or extremely thick fog, what should the driver do due to the low visibility in such weather?

A. Turn on the headlamp and drive slowly

B. Turn on the fog lamp and drive slowl

C. Park in a safe place

D. Drive slowly close to the roadside

Answer: C

17. When the engine suddenly stalls on the road, what should the driver do?

A. Stop the vehicle and overhaul it immediately

B. Immediately turn on the hazard lamps

C. Move the vehicle to a place where it will not obstruct the traffic flow

D. Set up a breakdown warning sign

Answer: BCD

18. After setting off from the roadside, motor vehicle drivers should speed up as soon as possible and make a sharp left-turn in order to drive into the normal lane.

A. Right

B. Wrong

Answer: B

19. When a motorcycle turns at an excessively high speed, it can easily dash out of a curve or skid sideways.

A. Right

B. Wrong

Answer: A

20. When encountering pedestrians slowly cross the road in a residential area, the driver should sound the horn continuously.

A. Right

B. Wrong

Answer: B

21. What is the meaning of this sign?

A. Road narrows on both sides

B. Road narrows on the right side

C. Road narrows on the left side

D. Bridge narrows

Answer: A

22. What is the meaning of this sign?

A. Passing by the right side

B. Passing by the left side

C. Running to right side

D. Running the roundabout

Answer: D

23. When using emergency brake, be aware of keeping the body of the motorcycle being perpendicular to the ground to avoid sideslip.

A. Right

B. Wrong

Answer: A

24. What should the motor vehicle driver do when the motor vehicle encounters the crosswalk in thissituation?

A. Slow down and pass

B. Speed up and pass

C. Sound the horn and pass

D. Stop immediately

Answer: A

25. Which of the following measures is incorrect when a motor vehicle stops?

A. Stop at a stipulated place

B. Avoid stopping on pedestrian streets

C. Avoid obstructing the passing of other motor vehicles and pedestrians when temporarily stops on the road

D. Stop on the non-motor vehicle lane

Answer: D