松原摩托车的英语考试

1. When crossing each other at night, how far should change the high beam lights to low beam lights?

A. not need to change lights

B. beyond 150m

C. within 100m

D. within 50m

Answer: B

2. When passing a turn or a curve section, the driver should slow down and disengage the clutch.

A. Right

B. Wrong

Answer: B

3. The width of loaded goods should ______________ from a three-wheel motorcycle.

A. not exceed 0.15 meter

B. not exceed

C. not exceed 0.20 meter

D. not exceed 0.25 meter

Answer: B

4. When encountering a vehicle in front ascending on a mountainous road covered with ice and snow, what should the motor vehicle driver do?

A. Ascend after the vehicle in front passes the slope

B. Overtake the vehicle in front swiftly and drive on

C. Overtake the vehicle in front with a slow speed and drive on

D. Follow the vehicle in front closely

Answer: A

5. Which lamp should be turned on when motor vehicles pass through a road section at night where the street light condition is good?

A. Front and rear fog lamps

B. Low-beam

C. High-beam

D. Hazard lamp

Answer: B

6. Before the motorized vehicle runs on the road, the driver should check the safety and technical performance of the vehicle.

A. Right

B. Wrong

Answer: A

7. When finding a tire burst on the road, the driver should gently depress the brake pedal, reduce speed and stop the vehicle slowly.

A. Right

B. Wrong

Answer: A

8. When a vehicle encounters a strong side wind in a mountain valley, the driver should drastically turn the steering handlebar to adjust the direction of the vehicle if he feels the vehicle deviates from the normal direction.

A. Right

B. Wrong

Answer: B

9. The driver who drives after drunk is subject to ______

A. a criminal restriction and a fine

B. a prison term of more than 2 years

C. a criminal detention and a fine

D. a prison term of less than 2 years

Answer: C

10. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

11. What is the meaning of this sign?

A. stop by the left side of the road

B. downhill section left

C. left turn only

D. run by the left side of the road

Answer: D

12. When following a vehicle on the road, the distance from the vehicle in front is not important. As long as the driver goes forward at the same speed as the vehicle in front does, he/she can avoid a rear-end collision.

A. Right

B. Wrong

Answer: B

13. When a motorcycle wades across the water, the braking efficiency of the brake does not change.

A. Right

B. Wrong

Answer: B

14. What is the meaning of this sign?

A. turn left

B. no going straight

C. straight-going lane

D. one-way road

Answer: A

15. While driving a motorcycle, it is permitted to keep one hand on the handlebar but not allowed two hands leave handle bars at the same time.

A. Right

B. Wrong

Answer: B

16. Turn on the right-turn signal and return immediately to the original lane after overtaking.

A. Right

B. Wrong

Answer: B

17. What is the meaning of this sign?

A. bypass from left side

B. continuous curves

C. sharp left curve

D. sharp right curve

Answer: C

18. Which of the following vehicle in front in the same lane is not allowed to be overtaken?

A. the vehicle is making a stop

B. the vehicle is reducing speed to yield

C. the vehicle is taking a U turn

D. the vehicle is running normally

Answer: C

19. When a motorized vehicle causes a minor traffic accident and obstructs traffic flow, it does not need to move.

A. Right

B. Wrong

Answer: B

20. When driving on road sections where safe sight distance is affected, such as the top of a ramp, what should drivers do to ensure safety?

A. Rush through

B. Use hazard lamp

C. Cut speed and sound the horn

D. Drive at will

Answer: C

21. When running on the road having maximum speed limit signs, the motorized vehicle is not allowed to exceed the marked maximum speed.

A. Right

B. Wrong

Answer: A

22. Which one of the following measures is correct when a motor vehicle intends to overtake but the vehicle infront refuses to yield?

A. Use a long-sounding horn

B. Follow the vehicle in front while turning high-beam

C. Wait for it to yield while keeping a safe distance

D. Use high-beam and low-beam alternatively

Answer: C

23. When encountering stopping and waiting in turn or slow-moving vehicles in front, the motorized vehicle may _________.

A. borrow road to overtake

B. occupy the opposite lane

C. follow the vehicles in front

D. cut in the waiting vehicles

Answer: C

24. A motorized vehicle driver who drives after drinking is subject to a 12-point penalty.

A. Right

B. Wrong

Answer: A

25. What is the meaning of this sign?

A. slippery section

B. sharp curve

C. inverse curve

D. continuous curves

Answer: C