宜春摩托车类考试英文题库

1. Traffic markings are divided into indication, warning and prohibition.

A. Right

B. Wrong

Answer: A

2. What is the meaning of this sign?

A. crosswalk lights

B. watch for pedestrians

C. attention to traffic lights

D. intersection

Answer: C

3. What should motor vehicle drivers do when approaching an oncoming vehicle on a frozen road?

A. Cut speed as approaching each other

B. Pass each other by speeding up properly

C. Pass each other slowly by cutting speed in advance

D. Pass each other along the central line to the best

Answer: C

4. How to use lights when overtaking at night?

A. turn off the high beam light

B. turn on high beam lights

C. use fog lights

D. using the high and low beam lights alternately

Answer: D

5. When driving into the traffic flow on a main road from a relief road, drivers should speed up.

A. Right

B. Wrong

Answer: B

6. Serious wave will appear when the front tire blows out; the driver should release the accelerator, firmly hold the steering wheel with both hands, quickly gradually break down, and stop to yield.

A. Right

B. Wrong

Answer: A

7. When driving on a damp and slippery road, drivers should avoid using the emergency brake to his/her best ability.

A. Right

B. Wrong

Answer: A

8. For a temporary stop on a foggy day, the driver should only turn on the fog lamp and the low-beam

A. Right

B. Wrong

Answer: B

9. Which illegal conduct is subject to a 12-point penalty?

A. violate traffic lights

B. use falsified license plate

C. call or answer the mobile phone

D. violate prohibitive signs

Answer: B

10. If a person who has caused a major traffic accident and if his act constitutes a crime, he should be held for _________.

A. criminal liability

B. civil liability

C. direct liability

D. economic liability

Answer: A

11. What is the meaning of this sign?

A. the lane for non-motorized vehicles

B. yield non-motorized vehicles

C. no passing for non-motorized vehicles

D. watch for non-motorized vehicles

Answer: D

12. How to use lights when pulling over on road?

A. turn on the hazard lights

B. turn on the right-turn signal in advance

C. use the high and low beam lights alternately

D. not need to use any light to indicate

Answer: B

13. When causing a road accident involving property damage, the party should leave the scene on his own but he does not leave, the traffic police can not order him to leave.

A. Right

B. Wrong

Answer: B

14. When causing a road accident involving property damage, the parties to the accident have no dispute over the fact and cause, they should take photos of the scene or mark the vehicles’ location when they move the vehicles.

A. Right

B. Wrong

Answer: A

15. Motor vehicle drivers don’t need to use any lamp at night when passing through a road section where the street light condition is good.

A. Right

B. Wrong

Answer: B

16. What is the meaning of this sign?

A. Road narrows on both sides

B. Road narrows on the right side

C. Road narrows on the left side

D. Bridge narrows

Answer: A

17. Which is subject to a 6-point penalty?

A. violate the traffic lights

B. drive school bus without qualification

C. drive the vehicle which permission is different

D. drive after drink

Answer: A

18. What is the meaning of this sign?

A. no going straight and no changing to left lane

B. no going straight and no left turn

C. allowed to go straight and change to left lane

D. no going straight and no right turn

Answer: D

19. When use the brake of a motorcycle, use the front-wheel brake first, then use the back-wheel brake.

A. Right

B. Wrong

Answer: B

20. Traffic signals include Traffic lights, Traffic signs and Command of the traffic police.

A. Right

B. Wrong

Answer: A

21. Traffic Police can detain the vehicle according to law if it is suspected of using the label of inspection from other vehicle.

A. Right

B. Wrong

Answer: A

22. Which one of the following measures is correct when a motor vehicle intends to overtake but the vehicle infront refuses to yield?

A. Use a long-sounding horn

B. Follow the vehicle in front while turning high-beam

C. Wait for it to yield while keeping a safe distance

D. Use high-beam and low-beam alternatively

Answer: C

23. When a motorcycle is making a turn in a high speed, the driver should avoid using the brake or use the brake less to prevent sideslip.

A. Right

B. Wrong

Answer: A

24. When passing a turn or a curve section, the driver should slow down and disengage the clutch.

A. Right

B. Wrong

Answer: B

25. When a motorcycle reaches a muddy or burst-and-muddy section, the driver should stop, observe and select the level and solid section or the section with vehicle tracks.

A. Right

B. Wrong

Answer: A