钦州老外考摩托车驾照

1. How should lamps be used when motor vehicle drivers pass through a two-way tunnel?

A. Turn on the hazard lamps

B. Turn on the high-beam

C. Turn on the fog lamp

D. Turn on the low-beam

Answer: D

2. Max speed when pass the narrow road or brisge is _______

A. 50km/hr

B. 40km/hr

C. 30km/hr

D. 60km/hr

Answer: C

3. What is the meaning of this sign?

A. customs inspection

B. stop-for-inspection

C. frontier inspection

D. no passing

Answer: B

4. When passing a turn or a curve section, the driver should slow down and disengage the clutch.

A. Right

B. Wrong

Answer: B

5. When a motor vehicle passes over an inundated road drivers should change to a high gear and pass rapidly.

A. Right

B. Wrong

Answer: B

6. When a motor vehicle passes over an inundated road the driver should change to a low gear and pass at a constant speed.

A. Right

B. Wrong

Answer: A

7. When a traffic accident causing human injuries, preserve the scene and immediately report to the police.

A. Right

B. Wrong

Answer: A

8. When driving into the traffic flow on a main road from a relief road, drivers should speed up.

A. Right

B. Wrong

Answer: B

9. The traffic police may detain the motorcycle if its driver has falsified the license plate and vehicle license.

A. Right

B. Wrong

Answer: A

10. What is the meaning of this sign?

A. reducing speed 40m ahead

B. minimum speed is 40km/hr

C. axle weight limit is 40 tons

D. maximum speed limit is 40km/hr

Answer: D

11. What will be subject to if submitting false materials to apply for driving license?

A. a 20~200 yuan fine

B. disqualification for applying for

C. cannot re-apply for within 1 year

D. cannot re-apply for within 2 years

Answer: C

12. A motorized vehicle driver who uses falsified and altered vehicle license is subject to a ________.

A. 6-point penalty

B. 3-point penalty

C. 2-point penalty

D. 12-point penalty

Answer: D

13. When a motor vehicle temporarily stops at night, which lamp should be turned on?

A. Front and rear fog lamp, clearance lamp and rear position lamp

B. Head lamp, clearance lamp and rear position lamp

C. Hazard lamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: C

14. When a motorized vehicle passes through narrow road or bridge, the maximum speed should not exceed 30 kilometers per hour.

A. Right

B. Wrong

Answer: A

15. What is the meaning of this sign?

A. slippery section

B. sharp curve

C. inverse curve

D. continuous curves

Answer: C

16. What is the meaning of this sign?

A. exit and entry for disabled people

B. watch for disabled people

C. rest area for disabled people

D. special passage for disabled people

Answer: B

17. Motor vehicle drivers don’t need to use any lamp at night when passing through a road section where the street light condition is good.

A. Right

B. Wrong

Answer: B

18. What is the meaning of this sign?

A. no changing lane

B. no left turn

C. no going straight

D. no U turn

Answer: D

19. Violating the law and regulations on road traffic safety is the act of violation of the law.

A. Right

B. Wrong

Answer: A

20. You can not drive a motorized vehicle into the lane where the red X-shaped light or the red arrow light is on.

A. Right

B. Wrong

Answer: A

21. What kind of harmful effect will be brought about by continuously using the foot brake on a long downhill road?

A. Shorten the engine’s service life

B. Make the driver feel tired

C. Easily cause the vehicle to overturn

D. Reduce the braking efficiency

Answer: D

22. When a tire blowout on the road, the driver should swiftly depress the brake pedal to reduce speed, do all his can to control the steering wheel and stop the vehicle as soon as possible.

A. Right

B. Wrong

Answer: B

23. What is the meaning of this sign?

A. overtaking ban is lifted

B. changing lane is allowed

C. changing lane ban is lifted

D. borrowing lane ban is lifted

Answer: A

24. When driving a motorcycle, the driver may wear slippers for the sake of safety.

A. Right

B. Wrong

Answer: B

25. When driving on road sections where safe sight distance is affected, such as the top of a ramp, what should drivers do to ensure safety?

A. Rush through

B. Use hazard lamp

C. Cut speed and sound the horn

D. Drive at will

Answer: C