郑州外国人考摩托车驾照

1. How should lamps be used when motor vehicle drivers pass through a two-way tunnel?

A. Turn on the hazard lamps

B. Turn on the high-beam

C. Turn on the fog lamp

D. Turn on the low-beam

Answer: D

2. Max speed when pass the narrow road or brisge is _______

A. 50km/hr

B. 40km/hr

C. 30km/hr

D. 60km/hr

Answer: C

3. For a temporary stop on a foggy day, the driver should only turn on the fog lamp and the low-beam

A. Right

B. Wrong

Answer: B

4. Which one of the following measures is correct when a motor vehicle intends to overtake but the vehicle infront refuses to yield?

A. Use a long-sounding horn

B. Follow the vehicle in front while turning high-beam

C. Wait for it to yield while keeping a safe distance

D. Use high-beam and low-beam alternatively

Answer: C

5. How to use lights when pulling over on road?

A. turn on the hazard lights

B. turn on the right-turn signal in advance

C. use the high and low beam lights alternately

D. not need to use any light to indicate

Answer: B

6. You may not use the turn signal when you change to the right lane.

A. Right

B. Wrong

Answer: B

7. When a tire blowout on the road, the driver should swiftly depress the brake pedal to reduce speed, do all his can to control the steering wheel and stop the vehicle as soon as possible.

A. Right

B. Wrong

Answer: B

8. When passing an intersection without traffic lights, the driver should go through as fast as possible.

A. Right

B. Wrong

Answer: B

9. What is the meaning of this sign?

A. reduce speed and go slowly

B. watch for danger

C. jammed section

D. accident-prone section

Answer: B

10. What is the meaning of this sign?

A. watch for pedestrians

B. watch for children

C. school area

D. crosswalk

Answer: A

11. Turn on the left-turn signal in advance when making a U turn on the road.

A. Right

B. Wrong

Answer: A

12. If a motorized vehicle driver chases and races while driving on road, commits serious acts, the driver is subject to a prison term of less than 3 years.

A. Right

B. Wrong

Answer: B

13. Nobody is allowed to drive a motorized vehicle that has safety hazards.

A. Right

B. Wrong

Answer: A

14. The motorcycles should be inspected once every year when it exceeds ____ as from the date of registration.

A. 1 year

B. 2 years

C. 3 years

D. 4 years

Answer: D

15. When a motorcycle goes downhill on a mountain road, it is not allowed to overtake.

A. Right

B. Wrong

Answer: A

16. When a vehicle encounters a strong side wind in a mountain valley, the driver should drastically turn the steering handlebar to adjust the direction of the vehicle if he feels the vehicle deviates from the normal direction.

A. Right

B. Wrong

Answer: B

17. What is the meaning of this sign?

A. slippery section

B. sharp curve

C. inverse curve

D. continuous curves

Answer: D

18. A motorized vehicle driver who uses falsified and altered vehicle license is subject to a ________.

A. 6-point penalty

B. 3-point penalty

C. 2-point penalty

D. 12-point penalty

Answer: D

19. Traffic Police can detain the vehicle according to law if it runs on the road failing to place a label of inspection.

A. Right

B. Wrong

Answer: A

20. What is the meaning of this sign?

A. reducing speed 40m ahead

B. minimum speed is 40km/hr

C. axle weight limit is 40 tons

D. maximum speed limit is 40km/hr

Answer: D

21. What is the meaning of this sign?

A. passing by the right side

B. passing by the left side

C. running to right side

D. running the roundabout

Answer: D

22. What is the meaning of this sign?

A. no honking the tweeter

B. no honking the woofer

C. should honk

D. no honking

Answer: C

23. What is the meaning of this sign?

A. more vehicles section

B. passing slowly

C. jammed section

D. construction section

Answer: B

24. Before the motorized vehicle runs on the road, the driver should check the safety and technical performance of the vehicle.

A. Right

B. Wrong

Answer: A

25. Which lamp should be used when motor vehicles pass hrough an intersection at night where there is no traffic light signal?

A. High-beam

B. Low-beam

C. Hazard lamps

D. High-beam and low-beam should be used alternatively

Answer: D