吉林摩托车科目四考试英文

1. When there is bleeding at the bone fracture of a wounded person, the first thing to do is to fix the wounded part in position, then stop the bleeding and dress the wound.

A. Right

B. Wrong

Answer: B

2. How should lamps be used by the motor vehicle driver who follows a vehicle on a road section at night where he street light condition is good?

A. Turn off the headlamp

B. Use high-beam

C. Turn off all lamps

D. Use low-beam

Answer: D

3. When a motor vehicle encounters a burning phenomenon, it should leave the vehicle quickly so as not to cause injury or asphyxia to the respiratory tract.

A. Right

B. Wrong

Answer: A

4. What is the meaning of this sign?

A. Road narrows on both sides

B. Road narrows on the right side

C. Road narrows on the left side

D. Bridge narrows

Answer: A

5. Speeding up to go though the intersection before the light turns to red in this case.

A. Right

B. Wrong

Answer: B

6. Keep enough safe distance When a motor vehicle follows another vehicle, because ______.

A. Avoke a rear-end collision

B. The closer you get to the vehicle, the less easy it is to grasp the situation ahead of the vehicle.

C. Enough distance to avoid emergencies

D. Prevent being unable to detect the front vehicle brake in time due to the damage rear lamp of the front vehicle

Answer: ABCD

7. What is the meaning of this sign?

A. Sharp right curve

B. Bypass from right side

C. Continuous curves

D. Sharp left curve

Answer: A

8. Which one of the following measures is correct when a motor vehicle intends to overtake but the vehicle infront refuses to yield?

A. Use a long-sounding horn

B. Follow the vehicle in front while turning high-beam

C. Wait for it to yield while keeping a safe distance

D. Use high-beam and low-beam alternatively

Answer: C

9. When the driver discovers that steering is stiff, the wrong measure is to ___________.

A. Reduce speed and stop the vehicle as fast as possible

B. Stop at a safe place

C. Continue to drive

D. Identify the cause

Answer: C

10. When a motorcycle reaches a muddy or burst-and-muddy section, the driver should stop, observe and select the level and solid section or the section with vehicle tracks.

A. Right

B. Wrong

Answer: A

11. According to regulations, motorcycle driver should wear _______.

A. Glasses

B. A special safety helmet

C. Gloves

D. Safety kneepads

Answer: B

12. A motorcycle is not permitted to tow other vehicles or to be towed by other vehicles.

A. Right

B. Wrong

Answer: A

13. When driving in icy and snowy weather, because of the reduction of the stability, it is easy for the wheels to race or slip when rapidly speeding up.

A. Right

B. Wrong

Answer: A

14. What is the meaning of this sign?

A. Intersection

B. Ring intersection

C. T-shaped intersection

D. Y-shaped intersection

Answer: A

15. What is the meaning of this sign?

A. Turn right

B. One-way road

C. Going straight only

D. Straight-going lane

Answer: A

16. When a motorcycle turns at an excessively high speed, it can easily dash out of a curve or skid sideways.

A. Right

B. Wrong

Answer: A

17. When the motor vehicle encounters a crosswalk in this situation, the driver may speed up and pass rapidly.

A. Right

B. Wrong

Answer: B

18. May speed up to go through the crosswalk when no one is near it

A. Right

B. Wrong

Answer: B

19. After setting off from a roadside, motor vehicle drivers should watch both sides of the road, turn left and drive into the normal lane slowly.

A. Right

B. Wrong

Answer: A

20. When rescuing a wounded person suffering from bone fracture, which of the following should be kept in mind?

A. Immediately send him/her to the hospital on a stretcher

B. Properly change the original posture when the injured person wounded

C. Dress the fracture with a bandage

D. Do not move the fractured body-part

Answer: D

21. When a motor vehicle temporarily stops at night, which lamp should be turned on?

A. Front and rear fog lamp, clearance lamp and rear position lamp

B. Head lamp, clearance lamp and rear position lamp

C. Hazard lamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: C

22. What should driver do when students crossing the road in line?

A. Speed up and pass in the front of the students

B. Sound the horn to warn the students to yield

C. Slow down and pass

D. Stop and wait until the students pass

Answer: D

23. Which lamp should be used when motor vehicles pass hrough an intersection at night where there is no traffic light signal?

A. High-beam

B. Low-beam

C. Hazard lamps

D. High-beam and low-beam should be used alternatively

Answer: D

24. When driving on a road covered with ice and snow, drivers tend to encounter glare caused by reflection of light rays from the road surface.

A. Right

B. Wrong

Answer: A

25. What is the meaning of this sign?

A. Hump bridge

B. High outburst road

C. Low-lying road

D. Bump road

Answer: A