鹤壁最新摩托车科目四试题库英文题

1. What is the meaning of this sign?

A. Electric bicycles may go

B. Parking space for non-motorized vehicles

C. Parking area for non-motorized vehicles

D. Non-motorized vehicles may go

Answer: D

2. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

3. What is the meaning of this sign?

A. Watch for long time honking

B. An unmanned level crossing

C. A manned level crossing

D. Multi-crossing of railway and road

Answer: B

4. How to do in this intersection?

A. Wait in the cross-hatched marking area

B. stop and wait outside the intersection

C. Follow the vehicle in front and pass

D. Wait inside the intersection

Answer: B

5. Which lamp should be turned on when motor vehicles pass through a road section at night where the street light condition is good?

A. Front and rear fog lamps

B. Low-beam

C. High-beam

D. Hazard lamp

Answer: B

6. When seeing this sign, the driver should reduce speed and observe the road conditions.

A. Right

B. Wrong

Answer: A

7. Turning on the high-beam is an effective way to improve visibility in fog weather.

A. Right

B. Wrong

Answer: B

8. What is the meaning of this sign?

A. Sharp right curve

B. Bypass from right side

C. Continuous curves

D. Sharp left curve

Answer: A

9. When a motorcycle wades across the water, the braking efficiency of the brake does not change.

A. Right

B. Wrong

Answer: B

10. When driving in icy and snowy weather, ________.

A. The tires can easily spin

B. The braking distance becomes longer

C. The tires can easily drift

D. Vehicle handling becomes more difficult

Answer: ABCD

11. When a vehicle stops temporarily at the roadside at night, the wrong measure is to ______.

A. Turn on the warning flash light

B. Turn on the contour light

C. Turn on the high beam light

D. Turn off all lights

Answer: CD

12. For a temporary stop on a foggy day, the driver should only turn on the fog lamp and the low-beam

A. Right

B. Wrong

Answer: B

13. Sounding the horn on a foggy daY can arouse the attention of the opposite side. After hearing the horn from the opposite side, the driver should also sound their own horn to respond.

A. Right

B. Wrong

Answer: A

14. When an erosive material catches fire, it should not be put out with water cannon.

A. Right

B. Wrong

Answer: A

15. When a motor vehicle passes over an overflowing bridge, what should the driver do after stopping and observing closely?

A. Change to a high gear and pass rapidly

B. Constantly observe the changes of the flow

C. Prepare to stop at any time

D. Change to a low gear and pass through at a constant speed

Answer: D

16. When encountering a vehicle in front ascending on a mountainous road covered with ice and snow, what should the motor vehicle driver do?

A. Ascend after the vehicle in front passes the slope

B. Overtake the vehicle in front swiftly and drive on

C. Overtake the vehicle in front with a slow speed and drive on

D. Follow the vehicle in front closely

Answer: A

17. What is the meaning of this sign?

A. No entry for bicycles

B. Lane for non-motorized vehicles

C. Special lane for bicycles

D. Bicycle stopping area

Answer: B

18. May speed up to go through the crosswalk when no one is near it

A. Right

B. Wrong

Answer: B

19. When a tire blowout on the road, the driver should swiftly depress the brake pedal to reduce speed and stop the vehicle.

A. Right

B. Wrong

Answer: B

20. When rescuing a wounded person suffering spinal fracture, it is necessary to ___________.

A. Take warm-keeping measure

B. Use soft stretcher to carry

C. Use sling to keep in position

D. Help the wounded person to move

Answer: C

21. What is the meaning of this sign?

A. Road narrows on both sides

B. Road narrows on the right side

C. Road narrows on the left side

D. Bridge narrows

Answer: B

22. How to ensure motor vehicles have sufficient power when driving uphill?

A. Downshift before reducing speed

B. Downshift after reducing speed

C. Downshift when the speed is excessively low

D. Downshift to the fullest extent

Answer: A

23. When approaching another vehicle at night, why should the driver alternate between high-and-low-beam at a distance more than 150 meters?

A. Warn each other before passing

B. Driving habit

C. Easy to observe the situation ahead from either side

D. Courtesy

Answer: C

24. A driver should accelerate in advance to overtake then it is likely to meet with oncoming vehicles.

A. Right

B. Wrong

Answer: B

25. When driving a motor vehicle ready to enter a congested roundabout, the wrong measure is to ______.

A. Honk to indicate another vehicle to yield

B. Stop to yield

C. Driving into the congested intersection

D. Drive fast into the intersection

Answer: ACD