七台河摩托车英文题库手机APP

1. What is the max speed on muddy road?

A. 15km/hr

B. 20km/hr

C. 40km/hr

D. 30km/hr

Answer: D

2. When a bicycle occupies the motor vehicle lane and obstructs the traffic, the driver should sound the horncontinuously and speed up to bypass on the left of the bicycle.

A. Right

B. Wrong

Answer: B

3. What should the driver do when he/she encounters an oncoming ambulance in the same lane?

A. Keep to the side and reduce speed or stop to yield

B. Drive ahead by occupying another lane

C. Yield by speeding up and changing lanes

D. Drive ahead in the original lane

Answer: A

4. When a motorized vehicle breaks down on the road and is difficult to move, the driver should place a warning sign within 50 meters behind the vehicle.

A. Right

B. Wrong

Answer: B

5. What is the meaning of this sign?

A. no going straight and no changing to left lane

B. no going straight and no left turn

C. allowed to go straight and turn left

D. no going straight and no right turn

Answer: B

6. Before driving, it is necessary to check whether the cooling liquid, engine oil and fuel oil, are leaking.

A. Right

B. Wrong

Answer: A

7. What is the meaning of this sign?

A. no going straight and no changing to left lane

B. no going straight and no left turn

C. allowed to go straight and change to left lane

D. no going straight and no right turn

Answer: D

8. If a motorized vehicle driver has caused a major accident in violation of the traffic regulations which has caused heavy loss to public or private property, the driver is subject to________.

A. a prison term of more than 3 years

B. a prison term of less than 3 years or a criminal detention

C. a prison term of 3 ~ 7 years

D. a prison term of more than 5 years

Answer: B

9. Traffic Signs and traffic markings are not traffic signals.

A. Right

B. Wrong

Answer: B

10. When a motor vehicle reaches a muddy or burst-and-muddy section of the road, the driver should stop, observe and select a level and solid section or a section with vehicle tracks.

A. Right

B. Wrong

Answer: A

11. Before a motorized vehicle overtakes, the driver should turn on the left-turn signal, use the high and low beam lights alternately or honk in advance.

A. Right

B. Wrong

Answer: A

12. When driving on a rough road, the driver should use low gear to keep low speed; try to choose roads with big pits to reduce bumpy feeling.

A. Right

B. Wrong

Answer: B

13. A motorized vehicle runs on the road without a label of inspection, the traffic police can detain the vehicle.

A. Right

B. Wrong

Answer: A

14. When a motorized vehicle returns to the original lane after overtaking, the driver should Turn on the right-turn signal.

A. Right

B. Wrong

Answer: A

15. What should be done by the driver who intends to overtake but the motor vehicle in front neither reduces its speed nor allows the right of way?

A. Continuously sounding the horn and accelerating to overtake

B. Accelerating and continuing to overtake

C. Refraining from overtaking

D. Following the vehicle in front closely and finding a chance to overtake

Answer: C

16. Traffic markings are divided into indication, warning and prohibition.

A. Right

B. Wrong

Answer: A

17. How to use lights when changing to the left lane on road?

A. turn on the right-turn signal in advance

B. not need to turn on any turn signal

C. turn on the left-turn signal in advance

D. turn on the low beam lights in advance

Answer: C

18. When driving on a road covered with ice and snow drivers should not use the emergency brake but can apply a sharp turn.

A. Right

B. Wrong

Answer: B

19. Which of the following measures is incorrect when a motor vehicle stops?

A. Stop at a stipulated place

B. Avoid stopping on pedestrian streets

C. Avoid obstructing the passing of other motor vehicles and pedestrians when temporarily stops on the road

D. Stop on the non-motor vehicle lane

Answer: D

20. When approaching a sharp curve, motor vehicle drivers should reduce speed only after entering the curve.

A. Right

B. Wrong

Answer: B

21. Motor vehicle drivers don’t need to use any lamp at night when passing through a road section where the street light condition is good.

A. Right

B. Wrong

Answer: B

22. How to use lights when pulling over on road?

A. turn on the hazard lights

B. turn on the right-turn signal in advance

C. use the high and low beam lights alternately

D. not need to use any light to indicate

Answer: B

23. When the tire pressure is too low, what can happen when driving at a high speed?

A. Tire pressure will be unstable

B. Tire pressure will increase

C. Driving resistance will decrease

D. The tire will burst

Answer: D

24. What should the driver do when encountering a vehicle from the opposite direction on a road without a central line?

A. driving closly by the roadside

B. driving by the central of the road

C. reducing speed and driving by right side

D. run by using the lane for non-motorized vehicles

Answer: C

25. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D