山东2026年摩托车科目四英文题库345题

1. When a tire blowout on the road, the driver should control the direction of the vehicle and use emergency braking to bring the motorcycle swiftly to a stop.

A. Right

B. Wrong

Answer: B

2. When encountering this situation in a residential area, the driver may honk to urge them to yield.

A. Right

B. Wrong

Answer: B

3. When driving on road sections where safe sight distance is affected, such as the top of a ramp, what should drivers do to ensure safety?

A. Rush through

B. Use hazard lamp

C. Cut speed and sound the horn

D. Drive at will

Answer: C

4. When such circumstances happen suddenly, drivers should reduce speed in a timely fashion or stop to yield.

A. Right

B. Wrong

Answer: A

5. When a motorcycle turns at an excessively high speed, it can easily dash out of a curve or skid sideways.

A. Right

B. Wrong

Answer: A

6. When the vehicles cross each other at night, what should the driver do if the vehicle coming in the opposite direction always use the high beam light.

A. Continuous change lights and honk to remind the vehicle coming in the opposite direction

B. Turn on the high beam light

C. Reduce speed or driving on the right side.

D. Move his sight to the right side to evade the light

Answer: CD

7. When rescuers enter the scene to rescue the wounded after harmful gas leakage caused by traffic accidents, they must wear air respirators or cover their mouth and nose with wet towels.

A. Right

B. Wrong

Answer: A

8. When a wounded person is under the wheel or cargo, the wrong method is to pull the limbs of the wounded.

A. Right

B. Wrong

Answer: B

9. How to make a U turn in this intersection?

A. broken lines of the central line

B. Make a U turn from the right lane

C. Enter the intersection and make a U turn

D. Make a U turn in the crosswalk

Answer: A

10. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

11. What is the meaning of this sign?

A. Road narrows on the left side

B. Narrow bridge

C. Narrow road

D. Road narrows on the right side

Answer: B

12. When seeing this sign, the driver should reduce speed and observe the road conditions.

A. Right

B. Wrong

Answer: A

13. What is the meaning of this sign?

A. The lane for non-motorized vehicles

B. Yield non-motorized vehicles

C. No passing for non-motorized vehicles

D. Watch for non-motorized vehicles

Answer: D

14. When driving on a road covered with ice and snow drivers should not use the emergency brake but can apply a sharp turn.

A. Right

B. Wrong

Answer: B

15. What is the meaning of this sign?

A. Road narrows on both sides

B. Road narrows on the right side

C. Road narrows on the left side

D. Bridge narrows

Answer: C

16. Before driving, it is necessary to check whether the cooling liquid, engine oil and fuel oil, are leaking.

A. Right

B. Wrong

Answer: A

17. The wrong measure to use the brake of a motorcycle is to __________.

A. Simultaneously use the front and back brakes

B. Use the front brake first

C. Use the back brake first

D. Avoid using the front brake too early

Answer: B

18. Once inflammable gas causes a fire disaster, it should be put out with water in good time.

A. Right

B. Wrong

Answer: B

19. Turning on the high-beam is an effective way to improve visibility in fog weather.

A. Right

B. Wrong

Answer: B

20. It is an illegal act for the driver to make calls while driving.

A. Right

B. Wrong

Answer: A

21. Whats the meaning of this mark on the road?

A. The lane for non-motorized vehicles

B. The special lane for motorcycles

C. The special lane for battery bicycles

D. the special lane for bicycles

Answer: A

22. When a motor vehicle temporarily stops in fog, which lamp should be turned on?

A. Hazard lamp, clearance lamp and rear position lamp

B. Left-turn indicator, clearance lamp and rear position amp

C. Headlamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: A

23. What is the most frequent problem for driving on a muddy road?

A. High resistance force

B. Sideways slide

C. The motor vehicle bumps

D. Steering failure

Answer: B

24. Which is the wrong measure to avoid tire burst?

A. Reduce tire pressure

B. Check tires regularly

C. Remove foreign matters from the tire tread grooves timely

D. Replace tires that have cracks or deep cuts

Answer: A

25. The main impact of muddy roads on safe driving is that the wheels may easily spin and skid

A. Right

B. Wrong

Answer: A