葫芦岛摩托车科目四英文题库

1. What is the meaning of this sign?

A. Sharp right curve

B. Bypass from right side

C. Continuous curves

D. Sharp left curve

Answer: A

2. When driving on a damp and slippery road, drivers should avoid using the emergency brake to his/her best ability.

A. Right

B. Wrong

Answer: A

3. What is the meaning of this sign?

A. Hump bridge

B. High outburst road

C. Low-lying road

D. Bump road

Answer: A

4. What is the meaning of this sign?

A. Reducing speed 40m ahead

B. Minimum speed is 40km/hr

C. Axle weight limit is 40 tons

D. Maximum speed limit is 40km/hr

Answer: D

5. What should motor vehicle drivers do when approaching an oncoming vehicle on a frozen road?

A. Cut speed as approaching each other

B. Pass each other by speeding up properly

C. Pass each other slowly by cutting speed in advance

D. Pass each other along the central line to the best

Answer: C

6. When a motorcycle is making a turn in a high speed, the driver should avoid using the brake or use the brake less to prevent sideslip.

A. Right

B. Wrong

Answer: A

7. When there is bleeding at the bone fracture of a wounded person, the first thing to do is to keep it in position before stopping the bleeding and dress the wound.

A. Right

B. Wrong

Answer: B

8. What is the meaning of this sign?

A. No right turn

B. No U turn

C. No going straight

D. No left turn

Answer: C

9. How should lamps be used by the motor vehicle driver who follows a vehicle on a road section at night where he street light condition is good?

A. Turn off the headlamp

B. Use high-beam

C. Turn off all lamps

D. Use low-beam

Answer: D

10. Whats the meaning of the double white broken lines in far front of the intersection?

A. Waiting to run line

B. Stopping and yield line

C. Slowdown and yield line

D. Left-turn waiting line

Answer: C

11. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

12. The motorized vehicle driver may go through an intersection rapidly when there is no traffic signal

A. Right

B. Wrong

Answer: B

13. What is the meaning of this sign?

A. Accident-prone section

B. Construction section

C. Reducing speed and going slowly section

D. Jammed section

Answer: A

14. If a driver finds there is no vehicle behind, he/she may change lanes without turning on the indicator.

A. Right

B. Wrong

Answer: B

15. When driving on a muddy road, what should the driver do?

A. Try to avoid using the foot brake

B. Stop and observe the road ahead

C. Avoid shifting halfway as much as possible

D. Put in low gear ahead of time

Answer: ABCD

16. Dangerous chemicals possess the characteristics of explosion, inflammation, poison, erosion and radiation.

A. Right

B. Wrong

Answer: A

17. When driving in a heavy rain, drivers should contro their speed to prevent their vehicles from sliding.

A. Right

B. Wrong

Answer: A

18. What is the meaning of this sign?

A. Going straight and right turn

B. Going straight and left turn

C. No going straight and no left turn

D. Right turn and left turn only

Answer: B

19. What is the meaning of this sign?

A. No U turn at intersection

B. No changing lane from both sides

C. No left or right turn

D. No going straight

Answer: C

20. When driving in icy and snowy weather, ________.

A. The tires can easily spin

B. The braking distance becomes longer

C. The tires can easily drift

D. Vehicle handling becomes more difficult

Answer: ABCD

21. When driving on a road covered with ice and snow, drivers tend to encounter glare caused by reflection of light rays from the road surface.

A. Right

B. Wrong

Answer: A

22. When a tire blowout on the road, the driver should control the direction of the vehicle and use emergency braking to bring the motorcycle swiftly to a stop.

A. Right

B. Wrong

Answer: B

23. When a motor vehicle stops temporarily in a rainy day,which lamp should be turned on?

A. Front and rear fog lamps

B. Hazard lamps

C. Headlamps

D. Reverse lamps

Answer: B

24. Matches, sulfur and red phosphorus are _________.

A. Explosives

B. Inflammable solid materials

C. Self-igniting articles

D. Oxidizing materials

Answer: B

25. What is the meaning of this sign?

A. U turn

B. Reversing

C. Left turn

D. Bypassing

Answer: A