株洲摩托车科目四英语试题

1. When encountering non-motorized vehicles cutting in on the road, the driver should________.

A. Honk to warn

B. Speed up and bypass from the front

C. Voluntarily reduce speed and yield

D. Suddenly speed up when approaching

Answer: C

2. What is the meaning of this sign?

A. More vehicles section

B. Passing slowly

C. Jammed section

D. Construction section

Answer: B

3. Which is correct when riding a motorcycle

A. Both hands can temporarily leave the steering handle bar

B. Voluntarily operate the steering handle bar

C. It is prohibited to simultaneously move two hands from the steering handle bar

D. It is able to statically turn the steering handle bar

Answer: C

4. When encountering an obstacle on one side of the road, what should vehicles do as they approach each other?

A. The vehicle not encountering an obstacle should Yield to the other vehicle

B. The slower vehicle should yield to the faster

C. The vehicle encountering an obstacle should yield to the other vehicle

D. The faster vehicle should yield to the slower

Answer: C

5. When a wounded person suffering bone fracture in the thigh, shank and spine, it is necessary to keep the fracture in position and refrain to move the wounded person.

A. Right

B. Wrong

Answer: A

6. When a vehicle approaches an intersection without crosswalk, the driver should _______ if he finds people are crossing the street.

A. Reduce speed or stop to yield

B. Honk to indicate them to yield

C. Pass before the pedestrians

D. Immediately change lane and bypass the pedestrians

Answer: A

7. Which lamp should be used when motor vehicles pass hrough an intersection at night where there is no traffic light signal?

A. High-beam

B. Low-beam

C. Hazard lamps

D. High-beam and low-beam should be used alternatively

Answer: D

8. What is the meaning of this sign?

A. No honking the tweeter

B. No honking the woofer

C. Should honk

D. No honking

Answer: C

9. When a motor vehicle temporarily stops at night, which lamp should be turned on?

A. Front and rear fog lamp, clearance lamp and rear position lamp

B. Head lamp, clearance lamp and rear position lamp

C. Hazard lamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: C

10. What is the meaning of this sign?

A. Intersection

B. Ring intersection

C. T-shaped intersection

D. Y-shaped intersection

Answer: A

11. After setting off from a roadside, motor vehicle drivers should watch both sides of the road, turn left and drive into the normal lane slowly.

A. Right

B. Wrong

Answer: A

12. When a motor vehicle stops in snow, which lamp should be turned on?

A. Front and rear fog lamps, clearance lamp and rear position lamp

B. Reverse lamp, clearance lamp and rear position lamp

C. Headlamp, clearance lamp and rear position lamp

D. Hazard lamps, clearance lamp and rear position lamp

Answer: D

13. The drivers, loaders and supercargoes responsible for dangerous chemicals transportation should all full understand the chemical characteristics, potential risks, features of the packaging containers and emergency measures for any unexpected accidents.

A. Right

B. Wrong

Answer: A

14. What is the meaning of this sign?

A. Slippery section

B. Sharp curve

C. Inverse curve

D. Continuous curves

Answer: C

15. Before riding a motorcycle, the driver should wear a safety helmet and adjust the angle of the rearview mirror till he can clearly watch the left side and the right side of the back.

A. Right

B. Wrong

Answer: A

16. When driving on a damp and slippery road, drivers should avoid using the emergency brake to his/her best ability.

A. Right

B. Wrong

Answer: A

17. Under such circumstances, motor vehicle drivers may sound the horn at the proper time and speed up to pass through.

A. Right

B. Wrong

Answer: B

18. What is the purpose of checking before driving?

A. Confirm whether the tyres of motor vehicles are damaged or not

B. Confirm whether there is a safety hazard near the vehicle.

C. Confirm whether there are obstacles around the vehicle

D. Confirm whether the road in front of the vehicle is safe

Answer: ABCD

19. When a tire blowout on the road, the driver should swiftly depress the brake pedal to reduce speed and stop the vehicle.

A. Right

B. Wrong

Answer: B

20. When driving into the traffic flow on a main road from a relief road, drivers should speed up.

A. Right

B. Wrong

Answer: B

21. When passing a turn or a curve section, the driver should slow down and disengage the clutch.

A. Right

B. Wrong

Answer: B

22. For a temporary stop on a foggy day, the driver should only turn on the fog lamp and the low-beam

A. Right

B. Wrong

Answer: B

23. What should the driver pay attention to when the motor vehicle passes a school?

A. Observe the traffic signs and markings

B. Slow down and pass slowly

C. Prohibited from sounding the horn

D. Pass rapidly

Answer: ABC

24. What is the meaning of this sign?

A. No going straight and no changing to left lane

B. No going straight and no left turn

C. Allowed to go straight and turn left

D. No going straight and no right turn

Answer: B

25. When driving on road sections where safe sight distance is affected, such as the top of a ramp, what should drivers do to ensure safety?

A. Rush through

B. Use hazard lamp

C. Cut speed and sound the horn

D. Drive at will

Answer: C