九江摩托车英文题库书

1. What is the meaning of this sign?

A. the lane for non-motorized vehicles

B. yield non-motorized vehicles

C. no passing for non-motorized vehicles

D. watch for non-motorized vehicles

Answer: D

2. A motorized vehicle driver who drives more than 50% faster than the prescribed speed limit is subject to a 12-point penalty.

A. Right

B. Wrong

Answer: A

3. When driving in thick or extremely thick fog, what should the driver do due to the low visibility in such weather?

A. Turn on the headlamp and drive slowly

B. Turn on the fog lamp and drive slowl

C. Park in a safe place

D. Drive slowly close to the roadside

Answer: C

4. After causing a road accident, the vehicle driver needs to change the scene for rescuing the wounded, the driver should mark the location.

A. Right

B. Wrong

Answer: A

5. What is the meaning of this sign?

A. no right turn

B. no U turn

C. no going straight

D. no left turn

Answer: C

6. What is the meaning of this sign?

A. straight-going lane

B. going straight only

C. one-way road

D. no going straight

Answer: B

7. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

8. If a driver has not received full penalty points, and the fine has not been paid, the penalty points will be transferred into the next scoring cycle.

A. Right

B. Wrong

Answer: A

9. When the driver discovers a tire is leaking and steers the vehicle off the main carriageway, he should refrain from applying emergency so as to avoid a vehicle turnover or a rear-end collision arising from the late braking of the following vehicle.

A. Right

B. Wrong

Answer: A

10. What is the meaning of this sign?

A. bump road

B. high outburst road

C. low-lying road

D. hump bridge

Answer: B

11. When crossing each other at night, how far should change the high beam lights to low beam lights?

A. not need to change lights

B. beyond 150m

C. within 100m

D. within 50m

Answer: B

12. A motorcycle is not permitted to tow other vehicles or to be towed by other vehicles.

A. Right

B. Wrong

Answer: A

13. A driver should drive the vehicles in accordance with the qualification listed on the driving license.

A. Right

B. Wrong

Answer: A

14. What is the max speed when in or out of the lane for non-motorized vehicles?

A. 40km/hr

B. 50km/hr

C. 60km/hr

D. 30km/hr

Answer: D

15. A motorcycle driver should wear long-sleeve and long-trouser-leg clothes with brilliant color so that he can be easy found by other transports participants when he is riding.

A. Right

B. Wrong

Answer: A

16. Overtaking is allowed when passing a level crossing in city where no train passes.

A. Right

B. Wrong

Answer: B

17. If a driver has driven a motorized vehicle for more than four hours running, he should stop the vehicle and rest for at least ____________.

A. 10 minutes

B. 15 minutes

C. 20 minutes

D. 5 minutes

Answer: C

18. A motorized vehicle is not allowed to stop in the section 50 meters to the intersection.

A. Right

B. Wrong

Answer: A

19. What is the meaning of this sign?

A. no U turn at intersection

B. no changing lane from both sides

C. no left or right turn

D. no going straight

Answer: C

20. It is not a bad habit for a driver to frequently change lanes.

A. Right

B. Wrong

Answer: B

21. When driving on a long downhill road, which is the best way to control driving speed?

A. Coast in neutral gear

B. Depress the clutch and coast

C. Use the engine to brake

D. Depress the brake pedal continuously

Answer: C

22. Driving a motorized vehicle on the road in violation of road traffic regulations shall be subject to relevant punishment.

A. Right

B. Wrong

Answer: A

23. If a motorized vehicle driver reaches 12 penalty points during the period of probation, the probation qualification should be revoked.

A. Right

B. Wrong

Answer: A

24. What is the meaning of this sign?

A. Y-shaped intersection

B. T-shaped intersection

C. intersection

D. ring intersection

Answer: B

25. How to ensure motor vehicles have sufficient power when driving uphill?

A. Downshift before reducing speed

B. Downshift after reducing speed

C. Downshift when the speed is excessively low

D. Downshift to the fullest extent

Answer: A