晋城考驾照用英语

1. After starting the engine, it lights to indicate that ______

A. engine main oil way blockage

B. engine oil pressure is too low

C. engine crankshaft box leaks

D. engine oil pressure is too high

Answer: B

2. Whats the meaning of this sign?

A. a manned level crossing

B. an unmanned level crossing

C. multi-crossing of railway and road

D. yielding the train with care

Answer: C

3. How to do in this situation?

A. stop and yield to the pedestrians

B. bypass from the front of the pedestrians

C. honk to remind the pedestrians

D. bypass from the rear of the pedestrians

Answer: A

4. When the motor vehicle installed ABS system brakes, the braking distance will be greatly shortened, so you do not have to keep a safe distance between vehicles.

A. Right

B. Wrong

Answer: B

5. This sign reminds the width of the bridge narrows ahead.

A. Right

B. Wrong

Answer: B

6. Whats the meaning of the double white broken lines in far front of the intersection?

A. waiting to run line

B. stopping and yield line

C. slowdown and yield line

D. left-turn waiting line

Answer: C

7. When driving a vehicle through an inundated road with pedestrians on both sides, the driver should ________.

A. Speed up and pass

B. Go forward normally

C. Continuously honk

D. Reduce speed and go slowly

Answer: D

8. Whats the meaning of this guide arrow?

A. going straight or U turn

B. going straight or left turn

C. going straight or changing to left lane

D. left turn or U turn

Answer: B

9. You should speed up to change lane in front of the red car.

A. Right

B. Wrong

Answer: B

10. How to make a U turn in this intersection?

A. broken lines of the central line

B. make a U turn from the right lane

C. enter the intersection and make a U turn

D. make a U turn in the crosswalk

Answer: A

11. It lights continuously to indicate that engine control system failed.

A. Right

B. Wrong

Answer: A

12. It lights to indicate that ______

A. the tail fog light is turned on

B. the low beam light is turned on

C. the high beam light is turned on

D. the head fog light is turned on

Answer: B

13. Whats the meaning of this sign?

A. provincial highway No.

B. county road No.

C. township road No.

D. national highway No.

Answer: C

14. When driving, the driver should be courteous and defensive, instead of being offensive.

A. Right

B. Wrong

Answer: A

15. What marking is the road mark in the circle?

A. crosswalk line

B. slowdown and yield line

C. stopping and yield line

D. intersection signal line

Answer: A

16. When the driver discovers a tire is leaking and steers the vehicle off the main carriageway, he should refrain from applying emergency so as to avoid a vehicle turnover or a rear-end collision arising from the late braking of the following vehicle.

A. Right

B. Wrong

Answer: A

17. Whats the meaning of this sign?

A. special lane for large buses

B. special lane for multi-passenger vehicles

C. special lane for public buses

D. special lane for BRT vehicles

Answer: D

18. When a vehicle passes a crosswalk, the driver should yield to the pedestrians.

A. Right

B. Wrong

Answer: A

19. When a vehicle enters a two-way tunnel, the driver should turn on ________.

A. The hazard lights

B. The high beam light

C. The fog light

D. The width light or the low beam light

Answer: D

20. Traffic Police only imposes a fine if a vehicle is suspected of using the falsified or altered label of inspection.

A. Right

B. Wrong

Answer: B

21. As the braking distance increases on a wet road in a rainy day, the driver should use the emergency brake as much as possible to reduce speed.

A. Right

B. Wrong

Answer: B

22. What pedal is it?

A. accelerator pedal

B. clutch pedal

C. handbrake

D. the brake pedal

Answer: A

23. Displays the current speed is 20 km / h

A. Right

B. Wrong

Answer: B

24. Driving motor vehicle with ABS system may occur side skidding when applying emergency braking.

A. Right

B. Wrong

Answer: A

25. It lights while driving to indicate that ______

A. engine temperature is too high

B. engine cooling system malfunction

C. engine lubrication system malfunction

D. engine temperature is too low

Answer: A