河源英文驾照科目一考试

1. What is the max speed when passing a level crossing?

A. 15km/hr

B. 20km/hr

C. 30km/hr

D. 40km/hr

Answer: C

2. Whats the meaning of the double white solid lines in far front of the intersection?

A. stopping and yield line

B. slowdown and yield line

C. left-turn waiting line

D. waiting to run line

Answer: A

3. A vehicle running on an expressway may frequently change lanes.

A. Right

B. Wrong

Answer: B

4. After entering the acceleration lane of an expressway, the driver should increase the speed to more than _________ per hour.

A. 50

B. 60

C. 30

D. 40

Answer: B

5. This sign reminds bump road ahead which may causes bump phenomenon.

A. Right

B. Wrong

Answer: A

6. The passenger in the front seat does not need to buckle up when a motorized vehicle runs.

A. Right

B. Wrong

Answer: B

7. Whats the meaning of this sign?

A. bypass at construction section

B. two-way traffic

C. bypass from left or right side

D. watch for danger

Answer: C

8. Whats the meaning of this sign?

A. no stopping temporarily

B. no long stopping

C. no stopping

D. long stopping is allowed

Answer: B

9. Whats the meaning of this sign?

A. embankment road

B. steep uphill road

C. continuous up slopes

D. steep downhill road

Answer: D

10. Traffic Police can detain the vehicle which is suspected of using the falsified or altered license plate and vehicle license.

A. Right

B. Wrong

Answer: A

11. No turning right when encountering this traffic light at the intersection.

A. Right

B. Wrong

Answer: B

12. Whats the meaning of this sign?

A. yield if going to turn left

B. straight one-way road

C. right one-way road

D. left one-way road

Answer: D

13. A motorized vehicle driver who uses falsified or altered driving license is subject to a 12-point penalty.

A. Right

B. Wrong

Answer: A

14. How to go straight when encountering this traffic light at the intersection?

A. enter the intersection to wait

B. turn left

C. speed up and pass straight

D. can not exceed the stop line

Answer: D

15. Ignition switch in the ON position, the vehicle can not use electrical appliances.

A. Right

B. Wrong

Answer: B

16. A rear tire blowout can sway the tail of the vehicle. The driver should firmly hold the steering wheel with both hands to ensure the vehicle go straight, reduce speed and then stop.

A. Right

B. Wrong

Answer: A

17. Whats the meaning of this sign?

A. driving at reduced speed in the section of 40 meters

B. minimum speed is 40km/hr

C. maximum speed is 40km/hr

D. 40km/hr speed limit ban is lifted

Answer: D

18. When a vehicle passes a level crossing, it is prohibited from overtaking.

A. Right

B. Wrong

Answer: A

19. A driver should observe the dynamic situation of the rear side vehicles before driving into the traffic flow from other road.

A. Right

B. Wrong

Answer: A

20. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer: B

21. The vehicle is allowed to _______ at this intersection.

A. go straight

B. turn right

C. turn left

D. go straight or turn left

Answer: B

22. May not turn on the turn signal when overtaking.

A. Right

B. Wrong

Answer: B

23. When following a vehicle on the road, the distance from the vehicle in front is not important. As long as the driver goes forward at the same speed as the vehicle in front does, he can avoid rear-end collision.

A. Right

B. Wrong

Answer: B

24. Whats the meaning of these white rectangle markings?

A. long time parking

B. time limited parking

C. free parking

D. special parking

Answer: B

25. What is this manipulation device?

A. the air throttle lever

B. the gear lever

C. the clutch lever

D. the handbrake

Answer: D