阿拉善盟考驾驶证英文题库

1. A driver may drive on the road a motorized vehicle overhauled which has reached the scraped standard.

A. Right

B. Wrong

Answer: B

2. A motorized vehicle is not allowed to make a U turn at the level crossing, bridge, steep slope, tunnel or dangerous road section.

A. Right

B. Wrong

Answer: A

3. Which part does it control when pulling this switch?

A. turn signals

B. reverse light

C. contour light

D. hazard light

Answer: A

4. Steering wheel will be locked if removing the key while the ignition switch is in the LOCK position.

A. Right

B. Wrong

Answer: A

5. What device does the switch of this symbol control?

A. window glasses of both sides

B. electric door

C. door unlock

D. child safety lock

Answer: C

6. What pedal is it?

A. clutch pedal

B. brake pedal

C. handbrake

D. accelerator pedal

Answer: A

7. What markings are the two double yellow broken lines on the road?

A. two-way lanes dividing line

B. variable lane line

C. lane-dividing line that can be crossed

D. one-way lanes dividing line

Answer: B

8. When a vehicle goes uphill, the driver should observe the road conditions and the length of the slope in advance and shift to the lower gear in a timely manner to ensure the vehicle has sufficient power.

A. Right

B. Wrong

Answer: A

9. This sign warns obstacles ahead and reducing speed to bypass.

A. Right

B. Wrong

Answer: B

10. When changing lanes on an expressway, the driver should turn on the turn signal in advance, observe the traffic conditions, and slowly turn the steering wheel and enter the new lane after making sure it is safe to do so.

A. Right

B. Wrong

Answer: A

11. Displays the current speed is 20 km / h

A. Right

B. Wrong

Answer: B

12. When the road maintenance vehicle and the engineering vehicle are on duty, the passing vehicles should avoid with care.

A. Right

B. Wrong

Answer: A

13. This sign indicates construction section ahead and bypassing from left or right side.

A. Right

B. Wrong

Answer: B

14. Before a vehicle enters an intersection, the driver should reduce speed, observe and make sure it is safe to do so.

A. Right

B. Wrong

Answer: A

15. When a vehicles turns, it should do so on the right side and refrain from occupying the lane of the other party. The left turn should be gentle and the right turn should be sharp.

A. Right

B. Wrong

Answer: A

16. Whats the meaning of the white horizontal solid line in the circle?

A. turning waiting line

B. deceleration line

C. yielding line

D. stop line

Answer: D

17. Whats the meaning of this sign?

A. line guide signs

B. lane merging guide signs

C. lane branching guide signs

D. turning guide signs

Answer: A

18. Whats the meaning of this sign?

A. expressway mileage No.

B. expressway border plate No.

C. expressway name No.

D. expressway section No.

Answer: C

19. When encountering stopping and waiting in turn or slow-moving vehicles in front, the motorized vehicle may _________.

A. borrow road to overtake

B. occupy the opposite lane

C. follow the vehicles in front

D. cut in the waiting vehicles

Answer: C

20. Whats the meaning of this sign?

A. Passing on both sides

B. Passing is prohibited

C. Passing by the left side

D. Passing by the right side

Answer: A

21. Whats the meaning of this sign?

A. emergency shelter

B. service area

C. pedestrian passage

D. crossing road facility

Answer: A

22. This sign reminds strong side wind ahead.

A. Right

B. Wrong

Answer: A

23. Whats the meaning of the yellow broken line on curbstone?

A. no temporary stopping

B. no taking and dropping people

C. no loading and unloading cargos

D. no long stopping

Answer: D

24. Whats the meaning of this sign?

A. change to right lane

B. branching point

C. road surface becomes wider

D. the number of lanes increases

Answer: D

25. When a vehicle goes downhill on a mountain road, it is not allowed to overtake.

A. Right

B. Wrong

Answer: A