赤峰驾校一点通英文版

1. A small bus driver should reduce speed rapidly when he suddenly feel bumpy on a flat expressway, to prevent tire blowout.

A. Right

B. Wrong

Answer: A

2. Ignition switch in the ON position, the vehicle can not use electrical appliances.

A. Right

B. Wrong

Answer: B

3. Whats the meaning of this sign?

A. crosswalk lights

B. watch for pedestrians

C. attention to traffic lights

D. intersection

Answer: C

4. When driving slowly in a congested road, the driver should ________ if another vehicle forcefully cuts in.

A. Honk to warn it against cutting in

B. Speed up to closely follow the vehicle in front and refuse to allow it to cut in

C. Squeeze the cutting-in vehicle to force it to leave

D. Voluntarily yield to ensure safe driving

Answer: D

5. Whats the meaning of this mark on the road?

A. average speed is 100km/hr

B. minimum speed limit is 100km/hr

C. 100km/hr speed limit ban is lifted

D. maximum speed limit is 100km/hr

Answer: D

6. It lights to indicate that ______

A. the tail fog light is turned on

B. the low beam light is turned on

C. the high beam light is turned on

D. the head fog light is turned on

Answer: A

7. This sign reminds an unmanned level crossing ahead.

A. Right

B. Wrong

Answer: A

8. Whats the meaning of this sign?

A. right-turn lane

B. U turn lane

C. left-turn lane

D. lanes for going in different directions

Answer: C

9. Registration alternation is not needed when _____

A. change engine

B. add anti-collision device

C. change vehicles colour

D. change the chassis

Answer: B

10. If a motorized vehicle causes a traffic accident on the road, the driver should immediately move the vehicle to the roadside.

A. Right

B. Wrong

Answer: B

11. Whats the meaning of this sign?

A. watch for two-way road

B. driving by either side of the road

C. watch for variable lane

D. variable lane

Answer: C

12. Whats the meaning of this sign?

A. stop to yield

B. no stopping temporarily

C. no entry

D. no long stopping

Answer: A

13. Whats the meaning of this sign?

A. rescue call number on expressway

B. service call number on expressway

C. police call number on expressway

D. traffic radio frequency on expressway

Answer: D

14. How to do when the vehicle breaks down on road and needs to stop to solve the problem?

A. stop in the middle of the road

B. stop the vehicle where will not interfere the traffic

C. turn on the low beam lights or fog lights

D. stop on the spot to solve the problem

Answer: B

15. Max speed when pass the narrow road or bridge is _______

A. 50km/hr

B. 40km/hr

C. 30km/hr

D. 60km/hr

Answer: C

16. What kind of sign is it?

A. directional sign

B. indicative sign

C. prohibitive sign

D. warning sign

Answer: A

17. How to go straight when encountering this traffic light at the intersection?

A. enter the intersection to wait

B. turn left

C. speed up and pass straight

D. can not exceed the stop line

Answer: D

18. How to use lights when overtaking at night?

A. turn off the high beam light

B. turn on high beam lights

C. use fog lights

D. using the high and low beam lights alternately

Answer: D

19. Whats the meaning of this sign?

A. expressway public phone

B. expressway police phone

C. expressway emergency phone

D. expressway rescue phone

Answer: C

20. What is this instrument?

A. pressure meter

B. ammeter

C. water temperature meter

D. fuel meter

Answer: D

21. Driving a motorized vehicle on the road should be required to be with a license plate.

A. Right

B. Wrong

Answer: A

22. When overtaking, the driver should ________ if the vehicle in front refuses to reduce speed or yield.

A. Follow closely and find chance to overtake again

B. Stop overtaking

C. Speed up and continue to overtake

D. Continuously honk and speed up to overtake

Answer: B

23. What is this manipulation device?

A. switch of the turn signal

B. switch of the head lights

C. switch of wiper

D. switch of defogger

Answer: D

24. When driving at night, the driver should reduce speed and go forward if the vehicle coming in the opposite direction fails to turn off the high beam light. This is designed to prevent an accident from happening when there are pedestrians crossing the place where the lights of the two vehicles meet.

A. Right

B. Wrong

Answer: A

25. What does this sign mean?

A. Reminding the side of a reservoir, lake or river ahead

B. Reminding the steep uphill road ahead

C. Reminding continuous two or more up slopes ahead

D. Reminding the steep downhill road ahead

Answer: B