外国人驾照考试文件要求

1. When a motorized vehicle encounters the cut in by another vehicle in a roundabout, the driver may not evade as long as he has the right of way.

A. Right

B. Wrong

Answer: B

2. A rear tire blowout can sway the tail of the vehicle. The driver should firmly hold the steering wheel with both hands to ensure the vehicle go straight, reduce speed and then stop.

A. Right

B. Wrong

Answer: A

3. Whats the meaning of the white solid lines at the edge of the carriageway on both sides of the road?

A. Vehicles may cross temporarily

B. Vehicles are not allowed to cross.

C. Motorized vehicles may cross temporarily.

D. Non-motorized vehicles may cross temporarily

Answer: B

4. In a vehicle that has safety belts, the driver should request the passengers to buckle up.

A. Right

B. Wrong

Answer: A

5. Using the low beam light in such circumstances.

A. Right

B. Wrong

Answer: A

6. What marking are the white serrated solid lines in the circle?

A. guide lane lines

B. direction guide line

C. variable guide lane line

D. one-way driving line

Answer: C

7. A driver who drives an illegally assembled motorized vehicle is subject to ______ .

A. being held for criminal liabilities according to law

B. a fine of 200 yuan ~ 2,000 yuan

C. being revoked the vehicle license

D. being detained for less than 15 days

Answer: B

8. When seeing a watch for children sign while driving, the driver should _______.

A. Speed up and pass

B. Bypass

C. Maintain the normal speed

D. Carefully select a speed

Answer: D

9. Whats the meaning of this sign?

A. stop to yield

B. no stopping temporarily

C. no entry

D. no long stopping

Answer: A

10. The driving license of a motorized vehicle driver will be detained after his penalty scores reach 12 points in a scoring circle.

A. Right

B. Wrong

Answer: A

11. In which section cannot overtake?

A. mountain road

B. urban elevated road

C. urban expressway

D. narrow bridge and curve

Answer: D

12. What is the max speed when in or out of the lane for non-motorized vehicles?

A. 40km/hr

B. 50km/hr

C. 60km/hr

D. 30km/hr

Answer: D

13. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road exit

D. road exit marking

Answer: D

14. After the green light at an intersection is on, the vehicles may not yield if non-motorized vehicles cut in.

A. Right

B. Wrong

Answer: B

15. This sign reminds an unmanned level crossing ahead.

A. Right

B. Wrong

Answer: A

16. When the road maintenance vehicle and the engineering vehicle are on duty, the passing vehicles should avoid with care.

A. Right

B. Wrong

Answer: A

17. What marking is the yellow road surface in the center of the intersection?

A. central circle

B. guide line

C. cross-hatched marking

D. parking area

Answer: C

18. Traffic Police can detain the vehicle which is suspected of using other vehicles license plate and vehicle license.

A. Right

B. Wrong

Answer: A

19. Driving a motorized vehicle shall not overtake in tunnels, steep slopes and other special sections.

A. Right

B. Wrong

Answer: A

20. A motorized vehicle is not allowed to stop in the section 50 meters to the bridge, steep slope or tunnel.

A. Right

B. Wrong

Answer: A

21. This set of the hand signals of the traffic police indicates that the vehicles should ___ .

A. turn right

B. reduce speed and pass slowly

C. pull over

D. change lane

Answer: D

22. Whats the meaning of the white horizontal solid line in the circle?

A. turning waiting line

B. deceleration line

C. yielding line

D. stop line

Answer: D

23. The vehicles should run by the right shoulder of an expressway.

A. Right

B. Wrong

Answer: B

24. A motorized vehicle driver who drives more than 50% faster than the prescribed speed limit is subject to a 12-point penalty.

A. Right

B. Wrong

Answer: A

25. Whats the meaning of this sign?

A. township road No.

B. county road No.

C. provincial highway No.

D. national highway No.

Answer: D