株洲摩托车类考试英文题库

1. When driving a vehicle equipped with power steering what should the driver do upon finding that steering is difficult?

A. Stop and identify the cause

B. Control the steering and drive slowly

C. Drive at a lower speed

D. Keep the vehicle going straight

Answer: A

2. The circle in the center of the intersection indicates that drivers should drive along the inner side when making a small left turn.

A. Right

B. Wrong

Answer: A

3. When there is a sudden braking failure on a downhill road, what should be done by the driver?

A. Driving to an emergency lane and reducing speed to stop

B. Dropping the gear by two positions

C. Changing to the reverse gear to force the vehicle to stop

D. Reducing speed by pulling up the handbrake

Answer: A

4. If the road condition behind is good, motor vehicle drivers should reverse rapidly.

A. Right

B. Wrong

Answer: B

5. What is the main impact of foggy weather on safe driving?

A. Easy to slide sideways

B. Low visibility

C. Increase the resistance

D. Widen the field of vision

Answer: B

6. The yellow broken line on the curb indicates that vehicles are not allowed to stop and let passengers embark or disembark or load and unload freight at the roadside.

A. Right

B. Wrong

Answer: B

7. The sign on the right warns of a winding road to the left ahead.

A. Right

B. Wrong

Answer: B

8. When encountering such a situation, the vehicles should cut speed or stop to yield as approaching each other.

A. Right

B. Wrong

Answer: A

9. The road marker indicates that vehicles are only allowed to turn right at the intersection ahead.

A. Right

B. Wrong

Answer: B

10. How many kinds of law-breaking acts are displayed in flash 4?

A. One

B. Two

C. Three

D. Four

Answer: C

11. Which one of the following is the safest way when driving a motor vehicle on this road?

A. Speed up and bypass the obstacle

B. Take the opposite lane and compel the other vehicle to yield

C. Stop and yield to the oncoming vehicle

D. Sound the horn or turn on the headlamp

Answer: C

12. The cross-hatched marking indicates an area where vehicle drivers are not allowed to stop.

A. Right

B. Wrong

Answer: A

13. The sign on the right indicates a T-shaped intersection head.

A. Right

B. Wrong

Answer: B

14. When passing this mountainous road, motor vehicle drivers should drive along the center of the road.

A. Right

B. Wrong

Answer: B

15. The marking on the road surface indicates that the speed limit of this road section is 80 km/hour.

A. Right

B. Wrong

Answer: B

16. When driving on a long downhill road, which is the best way to control driving speed?

A. Coast in neutral gear

B. Depress the clutch and coast

C. Use the engine to brake

D. Depress the brake pedal continuously

Answer: C

17. The sign in front indicates a one-kilometer distance from the highway entry.

A. Right

B. Wrong

Answer: A

18. The sign on the right indicates a 2-kilometer distance from the Donglushan Service Area on the highway.

A. Right

B. Wrong

Answer: A

19. When parking for a long time on an upward slope due to breakdown on the road, drivers should use this method to stop up wheels.

A. Right

B. Wrong

Answer: B

20. When driving on a road covered with ice and snow, drivers tend to encounter glare caused by reflection of light rays from the road surface.

A. Right

B. Wrong

Answer: A

21. When removing a wounded person suffering spinal fracture, the rescuer should never help the wounded person to walk. He may be carried away with a soft stretcher.

A. Right

B. Wrong

Answer: B

22. The sign on the right is an advance announcement of the highway destination.

A. Right

B. Wrong

Answer: B

23. Motor vehicles are prohibited from turning left in this situation.

A. Right

B. Wrong

Answer: A

24. When encountering an emergency on a highway, the driver should not drastically turn to evade.

A. Right

B. Wrong

Answer: A

25. Which lamp should be used when motor vehicles pass through an intersection at night where there is no traffic light signal?

A. High-beam

B. Low-beam

C. Hazard lamps

D. High-beam and low-beam should be used alternatively

Answer: D