濮阳摩托车科目四英语

1. The cross-hatched marking indicates an area where vehicle drivers are not allowed to stop.

A. Right

B. Wrong

Answer: A

2. After entering the acceleration lane of an expressway, the driver should increase the speed to how many kilometers per hour?

A. More than 30 km/hour

B. More than 40 km/hour

C. More than 50 km/hour

D. More than 60 km/hour

Answer: D

3. The driver should speed up to 40 kilometers per hour when he sees this traffic sign.

A. Right

B. Wrong

Answer: B

4. What should the driver do when the motor vehicle passes the level crossing?

A. Change to neutral gear and slide over

B. Stop, look and pass

C. Speed up, look and pass rapidly

D. Slow down, look and pass slowly

Answer: B

5. When approaching a sharp curve, motor vehicle drivers should reduce speed only after entering the curve.

A. Right

B. Wrong

Answer: B

6. Which one of the following vehicle types is not allowed to pass, as indicated by the right-hand sign?

A. Large trucks

B. Large buses

C. Motor vehicles of all kinds

D. Small vans

Answer: C

7. The sign on the right indicates a left-turn bypass route at the intersection ahead.

A. Right

B. Wrong

Answer: A

8. When there is bleeding at the bone fracture of a wounded person, the first thing to do is to fix the wounded part in position, then stop the bleeding and dress the wound.

A. Right

B. Wrong

Answer: B

9. The sign on the right warns of traffic signals ahead.

A. Right

B. Wrong

Answer: A

10. Motor vehicles on this kind of road are only allowed to overtake the vehicle in front from left.

A. Right

B. Wrong

Answer: A

11. Motor vehicles should accelerate when driving into an intersection with this traffic signal.

A. Right

B. Wrong

Answer: B

12. The motor vehicle should stop on the right and wait in this situation.

A. Right

B. Wrong

Answer: A

13. How to ensure motor vehicles have sufficient power when driving uphill?

A. Downshift before reducing speed

B. Downshift after reducing speed

C. Downshift when the speed is excessively low

D. Downshift to the fullest extent

Answer: A

14. The white zig-zag line on the highway serves as a reference for the speed of a driver.

A. Right

B. Wrong

Answer: B

15. What should a driver do when the engine stalls suddenly on the road?

A. Apply emergency braking to stop the vehicle

B. Slow down and stop the vehicle

C. Change to neutral gear and coast

D. Shut down the ignition switch

Answer: B

16. How should lamps be used when motor vehicle drivers pass through a two-way tunnel?

A. Turn on the hazard lamps

B. Turn on the high-beam

C. Turn on the fog lamp

D. Turn on the low-beam

Answer: D

17. The sign in front indicates a one-kilometer distance from the highway entry.

A. Right

B. Wrong

Answer: A

18. Under the circumstances shown in the flash, what should the driver do?

A. Find a chance to overtake the vehicle in front

B. Weave through motor vehicles ahead and pass

C. Reduce speed, stop, and wait in line

D. Sound the horn to urge vehicles in front

Answer: C

19. The guide arrow on the road surface of this lane indicates that only U-turns are permitted at the intersection ahead.

A. Right

B. Wrong

Answer: B

20. When encountering a vehicle in front ascending on a mountainous road covered with ice and snow, what should the motor vehicle driver do?

A. Ascend after the vehicle in front passes the slope

B. Overtake the vehicle in front swiftly and drive on

C. Overtake the vehicle in front with a slow speed and drive on

D. Follow the vehicle in front closely

Answer: A

21. When fixing the unexposed bones in position, it is necessary to exceed the upper and lower joints of the wounded body part.

A. Right

B. Wrong

Answer: A

22. When a gas tanker is leaking heavily, which of the following measures is wrong?

A. Cut off the power

B. Wear gas mask and protect gloves

C. Turn off the valve to stop leaking

D. Evacuate people to the leeward side

Answer: D

23. As shown in the flash, when overtaking a vehicle in front, the driver should make the horizontal distance as large as possible and may cross the solid line if necessary.