巴音郭楞2026年摩托车科目四英文题库345题

1. The broken yellow line in the center of the road indicates that bypassing by crossing the line is prohibited in any condition.

A. Right

B. Wrong

Answer: B

2. Which is the wrong measure to avoid tire burst?

A. Reduce tire pressure

B. Check tires regularly

C. Remove foreign matters from the tire tread grooves timely

D. Replace tires that have cracks or deep cuts

Answer: A

3. The driver should turn on the left-turn indicator after entering the acceleration lane on an expressway.

A. Right

B. Wrong

Answer: B

4. How should lamps be used when motor vehicle drivers pass through a two-way tunnel?

A. Turn on the hazard lamps

B. Turn on the high-beam

C. Turn on the fog lamp

D. Turn on the low-beam

Answer: D

5. Crossing the broken white line on the right edge of the road is allowed.

A. Right

B. Wrong

Answer: A

6. The sign on the right indicates to stop and yield for oncoming vehicles approaching on the road ahead.

A. Right

B. Wrong

Answer: B

7. The sign indicates no overtaking on the section ahead.

A. Right

B. Wrong

Answer: B

8. When a motor vehicle temporarily stops at night, which lamp should be turned on?

A. Front and rear fog lamp, clearance lamp and rear position lamp

B. Head lamp, clearance lamp and rear position lamp

C. Hazard lamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: C

9. If a driver finds there is no vehicle behind, he may change lanes without turning on the indicator.

A. Right

B. Wrong

Answer: B

10. When carrying a wounded person in a coma, rescue personnel should try to let the unconscious person remain in the supine position.

A. Right

B. Wrong

Answer: B

11. How many kinds of law-breaking acts are displayed in flash 6?

A. One

B. Two

C. Three

D. Four

Answer: C

12. Which lamp should be used when motor vehicles pass through an intersection at night where there is no traffic light signal?

A. High-beam

B. Low-beam

C. Hazard lamps

D. High-beam and low-beam should be used alternatively

Answer: D

13. The sign on the right warns of right-hand S-shaped bend ahead.

A. Right

B. Wrong

Answer: B

14. When a motor vehicle reaches a muddy or burst-and-muddy section of the road, the driver should stop, observe and select a level and solid section or a section with vehicle tracks.

A. Right

B. Wrong

Answer: A

15. The sign on the left warns that there are vehicles converging into the intersection on the left.

A. Right

B. Wrong

Answer: A

16. The driver may not change lanes when the motor vehicle turns right at this intersection.

A. Right

B. Wrong

Answer: B

17. When there is a sudden braking failure on a downhill road, in which ones of the following ways can drivers reduce speed?

A. Driving onto the emergency lane and reduce speed and stop there

B. Rubbing the vehicle body against the rocks or trees on roadside

C. Pulling up the handbrake first

D. Immediately changing to a low gear

Answer: ABD

18. When encountering a road like this, motor vehicle drivers should downshift in advance to maintain the dynamic of the motor vehicle.

A. Right

B. Wrong

Answer: A

19. The sign on the right warns of a village 200 meters ahead.

A. Right

B. Wrong

Answer: A

20. When a motor vehicle passes over an inundated road drivers should change to a high gear and pass rapidly.

A. Right

B. Wrong

Answer: B

21. When driving in thick fog causing poor visibility on the expressway, the driver should apply emergency braking to stop at once.

A. Right

B. Wrong

Answer: B

22. When the motor vehicle stops on an uphill section, how should the driver use the foot brake?

A. Earlier than on a level road

B. Later than on a level road

C. As timely as on a level road

D. Strongly depress the foot brake pedal

Answer: B

23. When driving into the traffic flow on a main road from a relief road, drivers should speed up.

A. Right

B. Wrong

Answer: B

24. It is not a bad habit for a driver to frequently change lanes.

A. Right

B. Wrong

Answer: B

25. In which ones of the following ways can motor vehicle drivers effectively prevent braking failure?

A. Maintaining the braking system periodically

B. Checking the free brake pedal travel before driving

C. Using the braking system correctly to avoid brake-fade

D. For vehicles with hydraulic braking system, checking if the brake fluid leaks before driving

Answer: ABCD