酒泉摩托车科目一考试英文400题

1. This sign warns of an intersection of railways and highways ahead.

A. Right

B. Wrong

Answer: A

2. How will the adhesive force of road change when speed increases on a damp and slippery road?

A. Increase sharply

B. Increase gradually

C. decrease sharply

D. No change

Answer: C

3. After entering the acceleration lane of an expressway, the driver should increase the speed to how many kilometers per hour?

A. More than 30 km/hour

B. More than 40 km/hour

C. More than 50 km/hour

D. More than 60 km/hour

Answer: D

4. What should the driver do when seeing these hand signals?

A. Go straight and pass through the intersection

B. Stop in front of the stop-line and wait

C. Turn left at the intersection

D. Drive at a lower speed at the intersection

Answer: C

5. When there is a braking failure on a downhill road, if there is no favorable terrain or opportunity to stop the vehicle, the driver should drop gear by one position or two positions, and control the speed by taking advantage of the braking role of the engine.

A. Right

B. Wrong

Answer: A

6. When driving on a long downhill road, which is the best way to control the speed?

A. Coast in neutral gear

B. Take a low gear

C. Depress the clutch

D. Pull up the handbrake

Answer: B

7. The sign indicates no overtaking on the section ahead.

A. Right

B. Wrong

Answer: B

8. What should be done by drivers in order to safely pass through the curve in this condition?

A. Reduce speed and drive on the right side

B. Drive on the central line of the road

C. Drive on the outer side of the curve

D. Drive by borrowing the opposite lane

Answer: A

9. When there is a sudden braking failure on the road, what should be done by the driver?

A. Firmly holding the steering wheel and controlling the direction

B. Immediately changing to a low gear to reduce speed

C. Using the stopping brake to reduce speed

D. Turning on the hazard lamps

Answer: ABCD

10. Sideslip happens most easily on which one of the following road surfaces?

A. Dry concrete road

B. Road surface at the beginning of rain

C. Damp concrete road surface

D. Road in heavy rain

Answer: B

11. The sign on the right warns of a wildlife protection area ahead.

A. Right

B. Wrong

Answer: B

12. When a motor vehicle deviates from the normal direction due to steering failure and an accident is unavoidable, what should the driver do?

A. Apply emergency brake

B. Immediately steer and adjust

C. Immediately steer to the side where there is no obstacle and evade

D. Immediately steer to the side where there is an obstacle and evade

Answer: A

13. The sign in front indicates that the highway entry is on the right side of the road.

A. Right

B. Wrong

Answer: B

14. What should be done to keep safe when a motor vehicle driver is overtaking in this condition?

A. Reducing speed and keeping a safe distance

B. Continuously sounding the horn to indicate the vehicle in front

C. Accelerating to pass while keeping a certain distance

D. Overtaking by occupying the opposite lane

Answer: A

15. In the condition of low visibility, drivers should turn on the low-beam when setting off

A. Right

B. Wrong

Answer: A

16. On which of the following roads may the wheels be most easily locked when braking?

A. Concrete road

B. Dirt road

C. Road covered by ice and snow

D. Sand road

Answer: C

17. The sign in front indicates the distance to highway destination.

A. Right

B. Wrong

Answer: B

18. The broken white reflective line on the road warns that drivers should drive at a lower speed on the road section ahead.

A. Right

B. Wrong

Answer: A

19. The marking on the road surface indicates that the speed limit of this road section is 50 km/hour.

A. Right

B. Wrong

Answer: A

20. The sign on the right warns of a ferry crossing 100 meters after turning right at the intersection ahead.

A. Right

B. Wrong

Answer: A

21. The guide arrow on the road surface of this lane indicates that only U-turns are permitted at the intersection ahead.

A. Right

B. Wrong

Answer: B

22. The cross-hatched marking indicates an area where vehicle drivers are not allowed to stop.

A. Right

B. Wrong

Answer: A

23. When approaching another vehicle at night, why should the driver alternate between high-and-low-beam at a distance more than 150 meters?

A. Warn each other before passing

B. Driving habit

C. Easy to observe the situation ahead from either side

D. Courtesy

Answer: C

24. What should the driver do to ensure the motor vehicle passes the level crossing safely?

A. Change to neutral gear and slide over

B. Switch to low gear after entering the level crossing

C. Decelerate and lower the gear before entering the level crossing

D. Stop and observe inside the level crossing

Answer: C

25. What should a motor vehicle driver do to ensure safety when experiencing a breakdown at night?

A. Park in a safe place

B. Turn on hazard lamp

C. Turn on clearance lamp and tail lamp

D. Set up a warning sign in accordance with regulation

Answer: ABCD