十堰摩托车科目四题库英文

1. Motor vehicles can turn right when driving into an intersection with this traffic signal.

A. Right

B. Wrong

Answer: A

2. When driving a vehicle equipped with power steering what should the driver do upon finding that steering is difficult?

A. Stop and identify the cause

B. Control the steering and drive slowly

C. Drive at a lower speed

D. Keep the vehicle going straight

Answer: A

3. Motor vehicle drivers may make a U-turn in the broken line area as long as it will not affect the normal traffic flow.

A. Right

B. Wrong

Answer: A

4. The motor vehicle should stop on the right and wait in this situation.

A. Right

B. Wrong

Answer: A

5. How will the adhesive force of road change when speed increases on a damp and slippery road?

A. Increase sharply

B. Increase gradually

C. decrease sharply

D. No change

Answer: C

6. It is safest for a motor vehicle driver to overtake the vehicle in front from its righthand on this kind of road.

A. Right

B. Wrong

Answer: B

7. When a motor vehicle passes over an inundated road drivers should change to a high gear and pass rapidly.

A. Right

B. Wrong

Answer: B

8. What should the driver do to follow other motor vehicles on a mountain road?

A. Closely follow the vehicle in front

B. Increase the safety distance

C. Reduce the vertical distance between vehicles

D. Try to overtake the vehicle in front as soon as possible

Answer: B

9. When a motor vehicle stops in snow, which lamp should be turned on?

A. Front and rear fog lamps, clearance lamp and rear position lamp

B. Reverse lamp, clearance lamp and rear position lamp

C. Headlamp, clearance lamp and rear position lamp

D. Hazard lamps, clearance lamp and rear position lamp

Answer: D

10. Drivers are allowed to cross the broken and solid white line on the road when changing lanes or pulling over.

A. Right

B. Wrong

Answer: A

11. When following other vehicles on the uphill section of a mountain road, what should the driver do if the vehicle in front stops?

A. Overtake from either side of the front vehicle

B. Stop close to the vehicle in front

C. Stop with a larger space from the vehicle in front

D. Sound the horn continuously to warn the other driver

Answer: C

12. When finding a tire burst on the road, the driver should use emergency braking while controlling the direction of the vehicle at the same time to stop the vehicle quickly.

A. Right

B. Wrong

Answer: B

13. If a motor vehicle enters a driving lane under this situation, what should the driver do?

A. Control the driving speed and follow the last vehicle

B. Speed up and cut in front of the second vehicle

C. Speed up and cut in front of the first vehicle

D. Cut in between two vehicles at will

Answer: A

14. When braking, side skid or tail swing may occur if the rear wheels are blocked.

A. Right

B. Wrong

Answer: A

15. When this signal is constantly flashing, how should a driver react?

A. Speed up as soon as possible

B. Pull over and wait

C. Observe the traffic situation around to make sure of safe driving

D. Refrain from passing

Answer: C

16. Which one of the following statements is correct in this situation?

A. Vehicles are prohibited from passing in the lanes on either side

B. Move into the lane on either side at a reduced speed

C. Move into the lane on the right side

D. Move into the lane on either side at an increased speed

Answer: A

17. Motor vehicle drivers don’t need to fasten their seatbelt

A. Right

B. Wrong

Answer: B

18. When approaching a sharp curve, motor vehicle drivers should reduce speed only after entering the curve.

A. Right

B. Wrong

Answer: B

19. The sign in front indicates the name and number of the highway.

A. Right

B. Wrong

Answer: A

20. A motor vehicle should not obstruct other vehicles when it enters the driving lane from an acceleration lane.

A. Right

B. Wrong

Answer: A

21. Under such circumstances, motor vehicles are not allowed to overtake.

A. Right

B. Wrong

Answer: A

22. How to ensure safe driving at night?

A. Drive at speed limit

B. Cut speed and drive carefully

C. Maintain the current speed

D. Drive above the speed limit

Answer: B

23. When braking failure happens to a fast-moving motor vehicle, what should be done by the driver to brake?

A. Continuously depressing the brake pedal

B. Immediately changing to a low gear to reduce speed and using the handbrake

C. Swiftly depressing the clutch pedal

D. Swiftly pulling up the handbrake

Answer: B

24. In the flash, it is correct for the driver to behave this way when there is a traffic jam caused by an accident on the expressway.

A. Right

B. Wrong

Answer: B

25. What should the driver do to ensure the motor vehicle passes the level crossing safely?

A. Change to neutral gear and slide over

B. Switch to low gear after entering the level crossing

C. Decelerate and lower the gear before entering the level crossing

D. Stop and observe inside the level crossing

Answer: C