南平摩托车驾照考试英语

1. What should the driver do when seeing these hand signals?

A. Go straight and pass through the intersection

B. Pull over

C. Drive to the waiting area for turning left

D. Turn right at the intersection

Answer: D

2. Before setting off, it is necessary to check the driving cabin, engine cabin, external and tires of the motor vehicle.

A. Right

B. Wrong

Answer: A

3. Under this circumstance, motor vehicle drivers should not reduce speed.

A. Right

B. Wrong

Answer: B

4. As shown in this picture, the vehicles intending to turn left are allowed to drive into the left-turn waiting area directly to wait for the green light.

A. Right

B. Wrong

Answer: B

5. What should the driver do upon finding that one of the left tires is leaking while driving?

A. Brake slowly to slow down

B. Brake swiftly to slow down

C. Turn to the right side swiftly

D. Apply emergency braking

Answer: A

6. When a wounded person suffering bone fracture in the thigh, shank or spine, moving the wounded person is usually prohibited.

A. Right

B. Wrong

Answer: A

7. The sign on the right warns of entering a tunnel, and requires reduced speed.

A. Right

B. Wrong

Answer: B

8. When braking, side skid or tail swing may occur if the rear wheels are blocked.

A. Right

B. Wrong

Answer: A

9. The sign on the left indicates no U-turn at the intersection ahead.

A. Right

B. Wrong

Answer: A

10. What should be given attention when setting off in this weather?

A. Turning on the high-beam

B. Turning on the front and rear fog lamps

C. Turning on the left indicator only

D. Continuously sounding the horn

Answer: B

11. The broken and solid white line on the road indicates that crossing is allowed on the solid line side.

A. Right

B. Wrong

Answer: B

12. When a motor vehicle catches fire on the expressway the driver should drive the motor vehicle to the service area or the parking lot to extinguish the fire.

A. Right

B. Wrong

Answer: B

13. The diamond-shaped broken line warns that drivers should drive at a lower speed on the road sections ahead.

A. Right

B. Wrong

Answer: A

14. What is the intersection ahead indicated by the right sign?

A. T-shaped intersection

B. Y-shaped intersection

C. Cross-shaped intersection

D. Roundabout

Answer: D

15. Under such circumstances, motor vehicle drivers should reduce speed by the right side swiftly and yield.

A. Right

B. Wrong

Answer: A

16. How should lamps be used when setting off in this situation?

A. Turn on the high-beam

B. Turn on the left indicator only

C. Turn on the left indicator and low-beam

D. Turn on hazard lamp

Answer: C

17. The cross-hatched marking indicates an area where vehicle drivers are allowed to stop and wait.

A. Right

B. Wrong

Answer: B

18. Drivers may turn left when seeing these hand signals.

A. Right

B. Wrong

Answer: A

19. What should the driver do to ensure safe driving when the motor vehicle encounters this situation in a residential area?

A. Sound the horn to warn the pedestrians

B. Speed up and pass as quickly as possible

C. Retain a normal speed

D. Slow down and prepare to stop

Answer: D

20. What should the driver do to follow other motor vehicles on a mountain road?

A. Closely follow the vehicle in front

B. Increase the safety distance

C. Reduce the vertical distance between vehicles

D. Try to overtake the vehicle in front as soon as possible

Answer: B

21. Sideslip happens most easily on which one of the following road surfaces?

A. Dry concrete road

B. Road surface at the beginning of rain

C. Damp concrete road surface

D. Road in heavy rain

Answer: B

22. The sign in front indicates that vehicles except large passenger vehicles are not allowed to drive on the right lane.

A. Right

B. Wrong

Answer: B

23. When driving on road sections where safe sight distance is affected, such as the top of a ramp, what should drivers do to ensure safety?

A. Rush through

B. Use hazard lamp

C. Cut speed and sound the horn

D. Drive at will

Answer: C

24. How to ensure motor vehicles have sufficient power when driving uphill?

A. Downshift before reducing speed

B. Downshift after reducing speed

C. Downshift when the speed is excessively low

D. Downshift to the fullest extent

Answer: A

25. When approaching another vehicle at night, why should the driver alternate between high-and-low-beam at a distance more than 150 meters?

A. Warn each other before passing

B. Driving habit

C. Easy to observe the situation ahead from either side

D. Courtesy

Answer: C