乐山摩托车英文驾考题库下载

1. When a motor vehicle passes over an inundated road, what should the driver do for safe driving?

A. Slow down and drive with special care

B. Speed up and pass rapidly

C. Maintain a normal speed and pass through

D. Change to a low gear and speed up to pass

Answer: A

2. When braking failure happens to a fast-moving motor vehicle, what should be done by the driver to brake?

A. Continuously depressing the brake pedal

B. Immediately changing to a low gear to reduce speed and using the handbrake

C. Swiftly depressing the clutch pedal

D. Swiftly pulling up the handbrake

Answer: B

3. When encountering an obstacle on one side of the road, what should vehicles do as they approach each other?

A. The vehicle not encountering an obstacle should Yield to the other vehicle

B. The slower vehicle should yield to the faster

C. The vehicle encountering an obstacle should yield to the other vehicle

D. The faster vehicle should yield to the slower

Answer: C

4. When driving on a long downhill road, which is the best way to control driving speed?

A. Coast in neutral gear

B. Depress the clutch and coast

C. Use the engine to brake

D. Depress the brake pedal continuously

Answer: C

5. Which of the following is an inflammable solid material?

A. Matches

B. Gun powder

C. Calcium carbide

D. Explosives

Answer: A

6. When a motor vehicle passes over an inundated road the driver should change to a low gear and pass at a constant speed.

A. Right

B. Wrong

Answer: A

7. The drivers, loaders and supercargoes responsible for dangerous chemicals transportation should all full understand the chemical characteristics, potential risks, features of the packaging containers and emergency measures for any unexpected accidents.

A. Right

B. Wrong

Answer: A

8. Motor vehicle drivers are allowed to overtake as long as there are no oncoming vehicles.

A. Right

B. Wrong

Answer: B

9. The road marker on the right side indicates that drivers may overtake by borrowing this road.

A. Right

B. Wrong

Answer: B

10. How will the adhesive force of road change when speed increases on a damp and slippery road?

A. Increase sharply

B. Increase gradually

C. decrease sharply

D. No change

Answer: C

11. When driving on a damp and slippery road, drivers should avoid using the emergency brake to his best ability.

A. Right

B. Wrong

Answer: A

12. When a motor vehicle temporarily stops in fog, which lamp should be turned on?

A. Hazard lamp, clearance lamp and rear position lamp

B. Left-turn indicator, clearance lamp and rear position amp

C. Headlamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: A

13. Under such circumstances, what should be done by a motor vehicle driver in order to yield out of courtesy?

A. Driving at a higher speed

B. Closely following the vehicle in front

C. Driving at a higher speed by the right side

D. Driving at a lower speed by the right side

Answer: D

14. What should motor vehicle drivers do when going straight and passing through the intersection ahead?

A. Reduce speed when approaching the intersection

B. Reduce speed after entering the intersection

C. May pass through the intersection without speed reduction

D. Accelerate in advance to pass through the intersection

Answer: A

15. The sign in front indicates a one-way lane after turning right.

A. Right

B. Wrong

Answer: A

16. The sign on the right warns of a one-way tunnel ahead.

A. Right

B. Wrong

Answer: B

17. When encountering a vehicle in front ascending on a mountainous road covered with ice and snow, what should the motor vehicle driver do?

A. Ascend after the vehicle in front passes the slope

B. Overtake the vehicle in front swiftly and drive on

C. Overtake the vehicle in front with a slow speed and drive on

D. Follow the vehicle in front closely

Answer: A

18. When temporarily parking on a raining day, what kind of lamp should the driver turn on?

A. Front and back fog lamps

B. Hazard warning lamp

C. Headlamp

D. Reversing lamp

Answer: B

19. When driving on this dangerous mountainside road, motor vehicles should drive along the right side of the road.

A. Right

B. Wrong

Answer: A

20. When entering an expressway ramp, which of the following statements is correct?

A. Drivers are allowed to overtake other vehicles

B. Drivers are prohibited from making U-turns

C. Drivers are allowed to stop

D. Drivers are allowed to reverse

Answer: B

21. When there is a sudden braking failure on a downhill road, in which ones of the following ways can drivers reduce speed?

A. Driving onto the emergency lane and reduce speed and stop there

B. Rubbing the vehicle body against the rocks or trees on roadside

C. Pulling up the handbrake first

D. Immediately changing to a low gear

Answer: ABD

22. When encountering a school bus which stops at the right roadside and students are embarking or disembarking, what should motor vehicle drivers do?

A. If there is only one motor vehicle lane in each direction, motor vehicle drivers behind the bus should stop and wait.

B. If there are two motor vehicle lanes in each direction, motor vehicle drivers in the left lane behind the bus may overtake the bus at a lower speed

C. If there are three motor vehicle lanes in each direction, motor vehicle drivers in the middle lane behind the bus should stop and wait

D. If there are three motor vehicle lanes in each direction, motor vehicle drivers in the left lane behind the bus may pass at a lower speed

Answer: ACD

23. As shown in the flash, what should the motor vehicle driver do when encountering this situation?

A. Reserve a safe crosswise distance and cut speed

B. Keep a normal speed

C. Use the emergency brake when approaching

D. Speed up and pass rapidly

Answer: A

24. When fixing the unexposed bones in position, it is necessary to exceed the upper and lower joints of the wounded body part.

A. Right

B. Wrong

Answer: A

25. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D