泸州摩托车英文题库手机APP

1. Which is the correct way to use a fire extinguisher?

A. Stand on the leeward side

B. Direct the fire extinguisher at the source of fire

C. Try to approach the source of fire as close as possible

D. Direct the fire extinguisher at the flames

Answer: B

2. Drivers may temporarily cross these central broken and solid yellow lines when overtaking.

A. Right

B. Wrong

Answer: A

3. Drivers are allowed to cross the broken and solid white line on the road when changing lanes or pulling over.

A. Right

B. Wrong

Answer: A

4. When finding a tire suddenly burst on the road, the driver should firmly hold the steering wheel with both hands to ensure the vehicle goes straight.

A. Right

B. Wrong

Answer: A

5. When encountering this situation at the gate of a school, the driver should prepare to stop.

A. Right

B. Wrong

Answer: A

6. The sign on the right warns of a dangerous mountainside road ahead.

A. Right

B. Wrong

Answer: A

7. What should motor vehicle drivers do when approaching an oncoming vehicle on a frozen road?

A. Cut speed as approaching each other

B. Pass each other by speeding up properly

C. Pass each other slowly by cutting speed in advance

D. Pass each other along the central line to the best

Answer: C

8. The diamond-shaped sign on the road indicates a crosswalk on the road ahead.

A. Right

B. Wrong

Answer: A

9. The circle in the center of the intersection indicates that drivers should drive along the inner side when making a small left turn.

A. Right

B. Wrong

Answer: A

10. The sign on the right warns of a village or town ahead suggesting a 30km/hour speed.

A. Right

B. Wrong

Answer: A

11. When a motor vehicle accidentally hits the guardrail of the highway, what should be done by the driver in order to keep safe?

A. Firmly holding and properly adjusting the steering wheel

B. Turning swiftly to the opposite direction

C. Immediately applying emergency braking

D. Immediately steering to the collision side

Answer: A

12. A motor vehicle may stop and yield if it encounters any problem when changing to the driving lane from an acceleration lane.

A. Right

B. Wrong

Answer: B

13. A correct measure to avoid tire burst of motor vehicles is to lower the tire pressure.

A. Right

B. Wrong

Answer: B

14. The road marker indicates that vehicles are only allowed to turn right at the intersection ahead.

A. Right

B. Wrong

Answer: B

15. The sign on the right indicates an ETC lane at toll station ahead.

A. Right

B. Wrong

Answer: A

16. As shown in this picture, the intersection guide line is designed to help drivers make turns.

A. Right

B. Wrong

Answer: A

17. It is not safe for a female driver to wear high heels to drive a vehicle.

A. Right

B. Wrong

Answer: A

18. The sign on the right indicates notice by sounding the horn.

A. Right

B. Wrong

Answer: B

19. When driving in a residential area, the driver should not exceed the speed indicated by the speed limit sign.

A. Right

B. Wrong

Answer: A

20. Which one of the following is the safest way when driving a motor vehicle on this road?

A. Speed up and bypass the obstacle

B. Take the opposite lane and compel the other vehicle to yield

C. Stop and yield to the oncoming vehicle

D. Sound the horn or turn on the headlamp

Answer: C

21. The motor vehicle should stop on the right and wait in this situation.

A. Right

B. Wrong

Answer: A

22. The solid yellow line on the curb indicates that temporary stopping or parking is allowed at the roadside.

A. Right

B. Wrong

Answer: B

23. When encountering such pedestrians, what should motor vehicle drivers do?

A. Go ahead along the middle line of the road

B. Continuously sound the horn

C. Speed up and overtake

D. Pay attention to the actions of such pedestrians

Answer: D

24. When a gas tanker is leaking heavily, which of the following measures is wrong?

A. Cut off the power

B. Wear gas mask and protect gloves

C. Turn off the valve to stop leaking

D. Evacuate people to the leeward side

Answer: D

25. The broken and solid white line on the road indicates that crossing is allowed on the solid line side.

A. Right

B. Wrong

Answer: B