锡林郭勒盟摩托车科目四考试英文

1. Motor vehicle drivers may borrow a special lane for other vehicle types, if one exists, to overtake.

A. Right

B. Wrong

Answer: B

2. When driving on this dangerous mountainside road motor vehicle drivers should drive along the left side of the road.

A. Right

B. Wrong

Answer: B

3. When extinguishing a fire, the driver should refrain from breathing through mouth or crying loudly Otherwise, the fire and smoke will scorch the upper respiratory tract.

A. Right

B. Wrong

Answer: A

4. A driver should accelerate in advance to overtake then it is likely to meet with oncoming vehicles.

A. Right

B. Wrong

Answer: B

5. The sign on the right warns of a village or town ahead suggesting a 30km/hour speed.

A. Right

B. Wrong

Answer: A

6. When a motor vehicle encounters this situation at a crosswalk, the driver must slow down and pass slowly.

A. Right

B. Wrong

Answer: B

7. The guide arrow on the road surface of this lane indicates that the lanes ahead will merge to the left side.

A. Right

B. Wrong

Answer: A

8. The main impact of muddy roads on safe driving is that the wheels may easily spin and skid

A. Right

B. Wrong

Answer: A

9. After a traffic accident, what is the most effective measure to prevent secondary accidents?

A. Evacuate all passengers

B. Turn on the hazard lamps

C. Mark the original place of the injured persons

D. Properly place the danger warning sign

Answer: ABD

10. What should be done when drivers evade an emergency on the highway?

A. Take braking measures to reduce speed

B. Yield by turning to the left side

C. Evade by swiftly turning the steering wheel

D. Yield by turning to the right side

Answer: A

11. Turning on the high-beam is an effective way to improve visibility in fog weather.

A. Right

B. Wrong

Answer: B

12. The motor vehicle should slow down and pass slowly in this situation.

A. Right

B. Wrong

Answer: A

13. The driver should yield to other non-motor vehicles when the motor vehicle turns right at this Intersection.

A. Right

B. Wrong

Answer: A

14. A driver should speed up when passing through road sections with this traffic marking.

A. Right

B. Wrong

Answer: B

15. In which of the following ways can motor vehicles avoid a tire burst?

A. Lowering tire pressure

B. Checking tires regularly

C. Removing foreign matters from the tire tread grooves timely

D. Replacing the tires that have cracks or deep cuts

Answer: BCD

16. When driving on a foggy day, what kind of lamps should the driver turn on?

A. Fog lamp and hazard lamp

B. Fog lamp and indicator

C. Fog lamp and high-beam

D. Fog lamp and low-beam

Answer: A

17. When driving in rain or snow, the driver should turn left to stabilize the vehicle if the motor vehicle slides to the right side.

A. Right

B. Wrong

Answer: B

18. The distance-ascertaining section of an expressway is used for the drivers to ascertain the safety distance when the speed is 100 kilometers per hour.

A. Right

B. Wrong

Answer: A

19. What should be taken note of by drivers in this situation?

A. The motor vehicles on the left side

B. The motor vehicles on the right side

C. The motor vehicles behind

D. The motor vehicles in front

Answer: A

20. How should lamps be used by the motor vehicle driver who follows a vehicle on a road section where the street light condition is good?

A. Turn off the headlamp

B. Use high-beam

C. Turn off all lamps

D. Use low-beam

Answer: D

21. The sign on the right warns of an uneven road ahead.

A. Right

B. Wrong

Answer: A

22. As shown in the flash, the motor vehicle chooses a correct way to pass through the level crossing.

A. Right

B. Wrong

Answer: A

23. When a motor vehicle turns at an excessively high speed, it can easily slide sideways.

A. Right

B. Wrong

Answer: A

24. After a motor vehicle enters the ramp from an expressway, it should reduce its speed below the prescribed speed limit.

A. Right

B. Wrong

Answer: A

25. What is the most frequent problem for driving on a muddy road?

A. High resistance force

B. Sideways slide

C. The motor vehicle bumps

D. Steering failure

Answer: B