曲靖摩托车的英语考试

1. What should be done by drivers in order to drive safely on the road in this condition?

A. Make a large turn on the left side of the road

B. Make a turn on the central line of the curve

C. Make a small turn on the right side of the road

D. Make a turn by borrowing the opposite lane

Answer: C

2. If the road condition behind is good, motor vehicle drivers should reverse rapidly.

A. Right

B. Wrong

Answer: B

3. What should the driver do when seeing these hand signals?

A. Turn left at the intersection

B. Stop and wait

C. Go straight at the intersection

D. Drive to the waiting area for turning left

Answer: B

4. When a wounded person suffering burns is thirsty he may drink a small quantity of lightly salty water.

A. Right

B. Wrong

Answer: A

5. When driving on a foggy day, the driver should turn on the fog lamp.

A. Right

B. Wrong

Answer: A

6. A motor vehicle should slow down and stop at this level crossing.

A. Right

B. Wrong

Answer: A

7. When disembarking, what should be done by drivers in order to keep safe?

A. Opening the door and disembarking immediately after stopping

B. Observing the traffic situation ahead

C. Opening the door first and then observing the situation beside and behind the vehicle

D. Observing the situation beside and behind the vehicle before opening the door slowly

Answer: D

8. The sign in front indicates the allocation of roads ahead.

A. Right

B. Wrong

Answer: B

9. The sign in front indicates a one-kilometer distance from the next left exit.

A. Right

B. Wrong

Answer: B

10. How many kinds of law-breaking acts are displayed in flash 5?

A. One

B. Two

C. Three

D. Four

Answer: C

11. The motor vehicle equipped with ABS may sideslip during an emergency brake.

A. Right

B. Wrong

Answer: A

12. Those traffic police signals mean turning right.

A. Right

B. Wrong

Answer: B

13. For a temporary stop on a foggy day, the driver should only turn on the fog lamp and the low-beam

A. Right

B. Wrong

Answer: B

14. When approaching a sharp curve, motor vehicle drivers should reduce speed only after entering the curve.

A. Right

B. Wrong

Answer: B

15. How to ensure motor vehicles have sufficient power when driving uphill?

A. Downshift before reducing speed

B. Downshift after reducing speed

C. Downshift when the speed is excessively low

D. Downshift to the fullest extent

Answer: A

16. The sign in front indicates the distance to highway destination.

A. Right

B. Wrong

Answer: B

17. Motor vehicles are not allowed to stop in this area for a long time.

A. Right

B. Wrong

Answer: A

18. Drivers may temporarily cross these central broken and solid yellow lines when overtaking.

A. Right

B. Wrong

Answer: A

19. When encountering this situation, which of the following is the correct way to overtake other vehicles?

A. Turn on high-beam

B. Use high-beam and low-beam alternatively

C. Turn on low-beam

D. Turning on hazard lamp

Answer: B

20. Two parallel broken double-yellow lines indicate the position of a diversion lane.

A. Right

B. Wrong

Answer: A

21. When this signal is constantly flashing, how should a driver react?

A. Speed up as soon as possible

B. Pull over and wait

C. Observe the traffic situation around to make sure of safe driving

D. Refrain from passing

Answer: C

22. When the tire pressure is too low, what will happen if the tire changes its shape in waves and increases in temperature due to fast movement?

A. Unstable tire pressure

B. Even lower tire pressure

C. Driving resistance increases

D. Tire burst

Answer: D

23. When driving on a long downhill road, which is the best way to control the speed?

A. Coast in neutral gear

B. Take a low gear

C. Depress the clutch

D. Pull up the handbrake

Answer: B

24. What should the driver do if the back wheel slides to the right on a muddy road?

A. Continuously speed up

B. Turn right

C. Turn left

D. Apply emergency brake

Answer: B

25. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D