贵州英文版驾校考试科目一

1. Use the high and low beam lights alternately when passing the crosswalk at night.

A. Right

B. Wrong

Answer: A

2. When a motorized vehicle breaks down at night, and is difficult to move, the driver should turn on the hazard lights, the contour lights and the tail lights.

A. Right

B. Wrong

Answer: A

3. When driving at night, the driver should go at a lower speed because his field of vision is limited and he can hardly observe the traffic conditions beyond the area covered by his vehicle light.

A. Right

B. Wrong

Answer: A

4. Whats the meaning of the yellow mark on the road?

A. no going straight

B. allowed to make a U turn

C. no U turn

D. no making a turn

Answer: C

5. What is the max speed on a road covered by ice and snow

A. 50km/hr

B. 40km/hr

C. 30km/hr

D. 20km/hr

Answer: C

6. The light switch is in this position, front fog lights turn on

A. Right

B. Wrong

Answer: A

7. What is the main role of the seat belt when there is a collision?

A. to protect the driver and passengers necks

B. to protect the driver and passengers chests

C. to reduce the injuries of the driver and passengers

D. to protect the driver and passengers waists

Answer: C

8. One can drive the small motor vehicle with automatic transmission if the authorized vehicle applied for is small motor vehicle.

A. Right

B. Wrong

Answer: A

9. Whats the meaning of this sign?

A. bump road

B. high outburst road

C. low-lying road

D. hump bridge

Answer: B

10. Speeding up to go though the intersection before the light turns to red in this case.

A. Right

B. Wrong

Answer: B

11. Whats the meaning of this sign?

A. expressway entry ahead

B. expressway ending ahead

C. expressway beginning ahead

D. expressway exit ahead

Answer: A

12. When crossing each other on a narrow road, the driver should slow down, yield and stop first.

A. Right

B. Wrong

Answer: A

13. Registration alternation is not needed when _____

A. change engine

B. add anti-collision device

C. change vehicles colour

D. change the chassis

Answer: B

14. Driving a motorized vehicle in the city road which has no central line, the maximum speed can not exceed 50 kilometers per hour.

A. Right

B. Wrong

Answer: B

15. When an accident has caused congestion on an expressway, the vehicles may run in the emergency strip on the right or in the shoulder of the road.

A. Right

B. Wrong

Answer: B

16. When discovering traffic congestion ahead while driving, the driver should ________.

A. Find a chance to overtake the vehicle in front

B. Weave through other vehicles

C. Reduce speed, stop and wait in line

D. Honk to urge other vehicles

Answer: C

17. Whats the meaning of this sign?

A. intersection

B. ring intersection

C. T-shaped intersection

D. Y-shaped intersection

Answer: A

18. A driver should buckled up before the vehicle moves.

A. Right

B. Wrong

Answer: A

19. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer: B

20. This sign reminds there is a one-way and poor lighting culvert ahead.

A. Right

B. Wrong

Answer: B

21. How to do when encountering slow-moving vehicles in front?

A. follow the vehicles in front

B. occupy the opposite lane to overtake

C. borrow the lane from right side to overtake

D. overtake from both sides as will

Answer: A

22. Whats the meaning of this sign?

A. uncovered car park

B. emergency stopping

C. parking space

D. passing bay

Answer: D

23. When starting up a vehicle stopping at the roadside, the driver should first ________.

A. Depress the accelerator pedal and start

B. Honk

C. Increase engine rotation speed

D. Observe the conditions around the vehicles

Answer: D

24. When a vehicle stops temporarily in a snowy day, the driver should turn on _______.

A. The head and tail fog light

B. The reserve light

C. The high beam light

D. The hazard lights

Answer: D

25. What is this manipulation device?

A. switch of reverse light

B. switch of wiper

C. switch of the hazard lights

D. combination switch of lights and signals

Answer: D