西安2026英文版驾照考试题库

1. How to use lights when overtaking at night?

A. turn off the high beam light

B. turn on high beam lights

C. use fog lights

D. using the high and low beam lights alternately

Answer: D

2. You can overtake from right side in this case.

A. Right

B. Wrong

Answer: B

3. What device does the switch of this symbol control?

A. the windscreen defrosting

B. the rear window wiper

C. the rear window defrosting

D. the windscreen wiper

Answer: D

4. It displays the current engine speed is 6000 rev / min.

A. Right

B. Wrong

Answer: B

5. What is the max speed limit on this road?

A. 100 km/hr

B. 90 km/hr

C. 120 km/hr

D. 110 km/hr

Answer: B

6. The continuously flashing yellow light means that the vehicle may speed up and pass.

A. Right

B. Wrong

Answer: B

7. It lights when turning on the front high beam lights.

A. Right

B. Wrong

Answer: B

8. Reduce speed or stop to look before the stop line when encountering this traffic light at the intersection.

A. Right

B. Wrong

Answer: B

9. The main impact of foggy weather on safe driving is _________.

A. The engine can easily stop

B. The vehicle can easily slide sideways

C. The resistance the vehicle increases

D. The visibility is low and the vision is poor

Answer: D

10. The validity of the driving license which is initially applied for is ______

A. 3 years

B. 5 years

C. 6 years

D. 12 years

Answer: C

11. This sign reminds embankment road ahead.

A. Right

B. Wrong

Answer: B

12. When passing an unmanned level crossing, the driver should ________.

A. Speed up and pass

B. Reduce speed and pass

C. Maintain the speed and pass

D. Stop, look and pass

Answer: D

13. When there is a diversion traffic control on the expressway, a driver can stop by the side to wait instead of leaving out of the expressway, for continually running after the traffic control.

A. Right

B. Wrong

Answer: B

14. When driving at night, the driver should reduce speed and go forward if the vehicle coming in the opposite direction fails to turn off the high beam light. This is designed to prevent an accident from happening when there are pedestrians crossing the place where the lights of the two vehicles meet.

A. Right

B. Wrong

Answer: A

15. A driver should observe the dynamic situation of the rear side vehicles before driving into the traffic flow from other road.

A. Right

B. Wrong

Answer: A

16. When a vehicle runs on a narrow mountain road, the driver should ______ if the party close to the mountain mass refuses to yield.

A. Honk to urge the other party to yield

B. Maintain the normal speed

C. Reduce speed or stop to yield

D. Use the left lane and pass with care

Answer: C

17. What marking are the white serrated solid lines in the circle?

A. guide lane lines

B. direction guide line

C. variable guide lane line

D. one-way driving line

Answer: C

18. Whats the meaning of this sign?

A. overflowing bridge

B. ferry

C. pier

D. overflowing road

Answer: B

19. You can drive a motorized vehicle a short distance after drinking as long as it does not interfere the driving operation.

A. Right

B. Wrong

Answer: B

20. It lights to indicate that ______

A. the floor and the front fans work

B. air internal circulation

C. air external circulation

D. the side and the floor fans work

Answer: A

21. A motorized vehicle is not allowed to make a U turn at the level crossing, bridge, steep slope, tunnel or dangerous road section.

A. Right

B. Wrong

Answer: A

22. Which of the following vehicle in front in the same lane is not allowed to be overtaken?

A. large bus or large truck

B. taxis

C. ambulance on duty

D. public bus

Answer: C

23. Displays the current speed is 20 km / h

A. Right

B. Wrong

Answer: B

24. Which part does it control when rotating this part of the switch?

A. the low beam lights

B. the head and tail fog lights

C. high beam lights

D. turn signals

Answer: B

25. As thick fog reduces visibility, turning on the high beam light can increase the visibility.

A. Right

B. Wrong

Answer: B